···
Log in / Register

What happens if the aspect ratio difference between front and rear tires is 5?

4 Answers
VanChloe
07/25/25 7:06am
Different front and rear tire specifications are used because rear-wheel-drive vehicles generally have relatively higher horsepower, requiring better traction from the rear tires. Therefore, high-horsepower rear-wheel-drive vehicles typically have wider rear tires to increase grip. Below is some information about tire aspect ratio: 1. Function: It is a major factor affecting a vehicle's sensitivity to road conditions. Vehicles with lower aspect ratios have thinner tire sidewalls and greater tire pressure, making them highly responsive to road surfaces. This allows for quick transmission of road signals to the driver, enhancing control, and is commonly seen in performance-oriented models. 2. Feature: Higher aspect ratios result in thicker tire sidewalls, providing ample cushioning but reducing road feel, especially during turns, making them more sluggish. This is typically found in comfort-oriented models.
Was this review help?
13
5
Share
McLucille
08/11/25 1:21pm
A difference of 5 in the aspect ratio between front and rear tires, such as 55 for the front and 60 for the rear, can make the car feel less stable when driving. The steering wheel might feel a bit floaty, especially during turns or braking, making the car prone to veering off course. In rainy or snowy conditions, traction is reduced, increasing the risk of skidding. Driving like this for a long time will cause faster tire wear, with the rear tires likely wearing out first, leading to unnecessary expenses for replacements. During inspections, check if the tire wear is even; if there are signs of vibration or imbalance, it's best to get a professional wheel alignment. Safety comes first—don't compromise to save money. Matching tires across the entire vehicle ensures a more secure and comfortable driving experience.
Was this review help?
20
4
Share
Expand All
HopeRose
09/27/25 5:57am
When modifying cars, I tried a setup with a 5 difference in tire aspect ratio between front and rear. Lower aspect ratio on the front tires made steering more responsive, but higher rear tires made the tail more prone to sliding out during turns. The imbalance was noticeable during acceleration and braking, with tires wearing out twice as fast. Braking distance increased, and handling became more challenging on mountain roads. For regular maintenance, I recommend keeping all tires consistent to enhance driving pleasure and stability. If you must use this setup, regularly check tire pressure and rotate them to ensure safety and prevent loss of control.
Was this review help?
3
2
Share
Expand All
Leo
11/10/25 7:57am
A difference of 5 in the aspect ratio between front and rear tires may cause the steering to feel unstable and slightly off-center. It increases braking distance, accelerates tire wear, and leads to higher costs for tire replacement. During daily commutes, it results in higher fuel consumption and driver fatigue. Regular checks for size compatibility are recommended for safety and peace of mind.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What to Do About Dents in Car Doors?

The solutions for dents in car doors are: 1. Set the hair dryer to the hot air setting and direct the airflow at the dented area of the car; 2. Immediately after using the hair dryer, cover the dent with prepared aluminum foil; 3. Place dry ice on top of the aluminum foil; 4. After some time, if you hear a metallic sound, it indicates that the car dent is returning to its original shape. Methods for car body maintenance include: 1. Waxing: Prevents the paint from coming into contact with air, slowing down the oxidation rate of the paint; 2. Polishing: Grinds away the aged paint film, allowing a new paint film to restore its shine; 3. Glazing: Enhances the gloss and hardness of the car surface, effectively reducing scratches; 4. Coating: Reduces damage to the car paint from external environmental factors, ensuring the gloss of the paint surface does not diminish and extending the lifespan of the car paint.
16
1
Share

What Causes the Steering Wheel Noise in Sagitar?

Here are the specific reasons for steering wheel noise in Sagitar: 1. Turn signal return sound: When turning on the turn signal while steering, it may be caused by the rebound clip of the automatic turn signal return mechanism, which is normal. 2. Noise from the steering column dust cover: If the noise comes from below the steering wheel, it may be from the steering column dust cover. Lack of lubrication in the dust cover can cause friction noise. Applying some grease inside the dust cover can solve the issue. 3. Noise from inside the steering wheel: This could be due to the clock spring inside the steering wheel. Remove the steering wheel and apply grease to the clock spring. Note: Disconnect the airbag fuse before removing the steering wheel to prevent accidental airbag deployment. 4. Noise from the stabilizer bar: Loose or damaged stabilizer bar bushings can cause noise not only when steering but also when driving on uneven roads. Adding shims can fix loose stabilizer bar bushings.
17
3
Share

How to Reset the Maintenance Light on the Envision?

To reset the maintenance light, turn the ignition to ON/RUN with the engine off. Use the up or down buttons on the right side of the steering wheel to navigate to the oil life percentage display. Then, press and hold the round button with a √ symbol in the middle of the right side of the steering wheel until the oil life display changes to 100%. Below is some information about the car maintenance light: 1. Car maintenance refers to the periodic inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as a preventive measure, also known as car servicing. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration, and extend the service life. 2. When the vehicle reaches a certain mileage, a specific symbol indicator light will appear on the dashboard to remind the owner to perform maintenance. This indicator is called the car maintenance light. After the vehicle is serviced, the maintenance light will not turn off by itself and requires a specific method to reset it, which is known as maintenance light reset.
17
4
Share

What is the remote control range of a car key?

The remote control range of a car key is between 30 to 50 meters. The functions of a car key remote control are: 1. Remotely lock and unlock the car doors; 2. Press the red horn-shaped button on the car key to locate the car or send a distress signal; 3. After turning off the engine, long-press the lock button on the remote key to close the windows; 4. Long-press the trunk unlock button to automatically pop open the trunk. The steps to replace the battery in a car key remote are: 1. Identify the battery model used in the car key; 2. Press the key symbol button on the side of the car key; 3. Remove the mechanical key from the car key, insert a flat-head screwdriver into the "open" position, and pry open the car key; 4. Open the car key and locate the battery compartment; 5. Replace the battery; 6. Reassemble the car key; 7. Insert the mechanical key back into the car key.
15
0
Share

Why Are There Fewer People Buying the MG HS?

The reason why fewer people buy the MG HS is due to public concerns about the seven-speed dry dual-clutch transmission and the initially inflated prices in the first six months after its launch. Below is an introduction to related MG models: 1. MG5: A coupe produced by MG, featuring the third-generation MG family design language, with a stylish and trendy exterior full of sporty and technological appeal. The MG5 is tailored for young people seeking dynamic and trendy aesthetics, combining fashion, quality, and sportiness in a trendy coupe. 2. Positioning: The all-new MG5 is positioned as an entry-level premium sporty coupe priced around 80,000 yuan. As the first sedan under MG's third-generation family design language, it boasts a fashionable and sporty exterior with advanced technological elements, offering five key premium experiences in design, performance, quality, intelligence, and safety. It provides a better choice for young consumers pursuing high-quality sporty sensations.
9
2
Share

What is the Tesla battery model number?

Tesla uses 18650 batteries produced by Panasonic. After the official production of Model 3, the new 21700 battery will replace the 18650 as the new cell. Relevant details are as follows: 1. Ternary lithium battery: The 21700 battery is a ternary lithium battery with a cathode material of lithium nickel cobalt aluminum oxide (NCA). This cylindrical ternary battery currently offers the highest energy density solution for power batteries. Compared to prismatic batteries, although this type of battery has high energy density, its stability is relatively poor, requiring support from an excellent BMS (Battery Management System). 2. Energy density: Under current conditions, the energy density of the 21700 battery system produced is around 300Wh/kg, which is approximately 20% higher than the 250Wh/kg of the original 18650 battery system. Additionally, according to Panasonic's test data on power lithium battery cells, the volumetric energy density of the 21700 battery is significantly higher than that of the 18650-type battery cells. The improvement in energy density of individual cells far exceeds the 20% increase observed after grouping.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.