What happens if I accidentally drive into a bus lane?

1 Answers
Ivan
07/29/25 1:06pm
Occupying a bus lane violates traffic regulations. The penalties for illegally occupying a bus lane are as follows: 1. Fine: Illegally occupying a bus lane will result in a 3-point deduction and a fine. Once a vehicle enters the bus lane during prohibited hours, it will be considered a violation. Some drivers may have a "gambling mentality," thinking they can avoid penalties by briefly entering the bus lane and then merging back into the normal lane before a traffic light. However, they may be caught by rear bus cameras or reported by the public. Therefore, it is essential to focus on driving according to the rules to avoid causing traffic congestion or accidents. 2. Criteria for determining violations: Violations are identified through the "electronic police system" with four clear photos of the license plate and the violation in progress. They can also be reported through the "public reporting platform," providing clear photos of the license plate and the violation for police verification, or captured by "front-facing bus cameras."
Was this review help?
19
1
Share
More Forum Discussions

What Causes Reduced Power and Lowered Engine Temperature?

It is primarily due to the engine overheating. The following details the reasons for engine overheating: 1. Insufficient coolant: A lack of coolant or the use of an inappropriate type can prevent the timely removal of heat generated by engine components, leading to elevated water temperature and high engine temperature. 2. Cooling system malfunction: Blockages in the radiator guard mesh or the ventilation channels of the radiator core by debris can impair cooling efficiency. A malfunctioning cooling fan may fail to transfer the heat generated during high-speed operation to the antifreeze in time, affecting heat dissipation. This can result in increased antifreeze temperature, causing issues like boiling over.
8
3
Share

What Does an Exclamation Mark in a Car Indicate?

When an exclamation mark appears on the car dashboard, there are five possible scenarios: general fault, automatic transmission fault, brake system fault, abnormal tire pressure, and lighting fault. Below is a detailed analysis of these five situations: General Fault: A triangle with an exclamation mark inside indicates a general performance or component malfunction in the car. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission issue or low transmission fluid level. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is necessary to avoid accidents. Abnormal Tire Pressure: A horizontal line with parentheses and an exclamation mark below represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem.
14
4
Share

How long does it take to get the results of a driver's license physical examination?

Driver's physical examination results are available immediately on-site. Here are some standards for the driver's license physical examination: 1. Vision: For applicants applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tramcars, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For applicants applying for other types of driving licenses, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 2. Color discrimination: No red-green color blindness. Color-blind individuals cannot obtain a driver's license as they cannot drive normally and may have difficulty seeing traffic signals, which can easily lead to accidents.
20
2
Share

Is It Harmful for a Car to Be Exposed to Rain Continuously?

Due to the protective function of the car's surface paint, the impact of rain on the car is generally minimal. Below are some maintenance tips after your car has been exposed to rain: Timely Car Washing: Rainwater in urban areas is usually acidic and may carry sticky substances. Once the rainwater evaporates, these sticky substances can adhere to the car and become difficult to remove. It is advisable to take your car to a 4S shop or a professional car detailing service as soon as possible for a thorough cleaning. Pay special attention to cleaning the gaps under the doors and the sludge inside the wheel hubs, and ensure these areas remain dry. Paint Care: Rainwater often contains acidic substances that can corrode the outer glossy layer of the car paint. Additionally, rainwater carries invisible dust particles that can oxidize when exposed to sunlight. After rain, it's best to perform a paint treatment on your car. A simple and effective method is waxing. Brake System Maintenance: Most car braking systems use a dual-circuit vacuum-assisted hydraulic system, and the brake fluid, which transmits braking force, is highly hygroscopic. If rainwater enters the brake fluid, it can lead to brake failure or even complete loss of braking. Therefore, during maintenance, it is crucial to check the brake fluid and any water traces on the brake discs to ensure the safety of the driver and passengers.
13
0
Share

Can Traffic Management 12123 Handle Vehicle Inspection?

Traffic Management 12123 does not support online vehicle inspection, but it allows you to schedule the time and location for your annual vehicle inspection. Below is relevant information about annual inspections: 1. Purpose of Annual Inspection: The purpose of the annual inspection is to assess the technical condition and operational capability of the vehicle, identify the location and cause of any faults. Only after passing the inspection can the vehicle continue to operate or undergo necessary repairs. 2. Notes for Annual Inspection: Do not alter the vehicle's appearance or tire size. The actual vehicle must match the photo on the driving license. Changes to the vehicle's appearance may result in failing the annual inspection.
10
3
Share

Is there any issue with installing 20mm wheel spacers?

Adding wheel spacers alters the wheel's ET (offset) and unsprung mass, which may slightly affect shock absorber performance and lifespan, but the impact is minimal. Here's some information about wheel spacers: Applications: Wheel spacers have extensive mechanical applications, resulting in various designs. Wheel Spacers: A wheel spacer is a disc-shaped component, most commonly seen in piping systems where they are used in pairs. In piping engineering, spacers primarily serve as connectors between pipes. When connecting two pipe ends, one spacer is installed on each end. Low-pressure pipelines can use threaded spacers, while welded spacers are required for pressures exceeding 4 kg.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.