What happens if a motorcycle is caught on the highway?

Is it necessary to fully cover the car trunk?

If the trunk is not frequently used to place items, or only a small number of items are placed, a non-full-coverage trunk mat is more practical. However, for heavy trunk users who often place a large number of items with sharp edges in the trunk, a full-coverage mat is more appropriate. The functions of a trunk mat are as follows: 1. Anti-slip: When traveling, if there is a trunk mat, the items you carry can be safely placed in the trunk of your car. The trunk mat is designed with an anti-slip surface to prevent items from scattering due to bumps, providing the most thorough protection. 2. Waterproof: The material of the trunk mat includes PE material for waterproofing, UV protection, strong toughness, and resistance to oil stains. It can prevent mud, sand, snow, water, and oil stains from contaminating items in the trunk, such as luggage. 3. Anti-contamination: It can be used to transport goods, plants, rain gear, or place damp items. The three-dimensional high-edge design effectively prevents dirt from spilling and protects the car from contamination. 4. Protection: Made of high-density foam material, it has excellent shock absorption and sound insulation, providing complete protection for every corner of the trunk against various intrusions.

17

4

Share

What to Do When Car Wiper Blades Don't Return to Position?

Here are the solutions for car wiper blades not returning to position: 1. Check if the motor is functioning properly. 2. Check if the wiper blades are stuck or have an open circuit. 3. Check if the hardware lacks lubrication, causing excessive friction. Below is relevant knowledge about wiper blades not returning to position: 1. Follow the principle of checking external factors before internal ones, and simple issues before complex ones to save time. Turn off the wiper motor, then turn it back on to check if the motor operates normally. 2. If it operates normally, rule out motor failure. Check for issues other than the motor, such as whether the wiper blades have an open circuit or are stuck. Check if the hardware lacks lubrication, causing excessive friction and preventing the spring from automatically returning to its original position. Then apply lubricant to the surface of the card.

14

2

Share

What to Do When a Car Skids?

Solutions for car skidding are as follows: 1. Front-wheel skid: In a front-wheel skid, the steering wheel cannot be turned, and the vehicle moves straight forward until it hits an obstacle and stops. For rear-wheel-drive cars, release the accelerator pedal, do not press the brake or clutch pedal, then turn the steering wheel to align the front wheels with the direction of the car body, but do not oversteer to avoid rear-wheel skidding. Gradually ease off the accelerator pedal, but do not release it completely. Avoid pressing the brake or clutch, as sudden deceleration may cause the rear wheels to skid as well. Slowly turn the steering wheel towards the intended direction of travel, but avoid turning too sharply or excessively. Once the car's direction is corrected, straighten the steering wheel. 2. Rear-wheel skid: In a rear-wheel skid, the rear of the car slides to one side, and the body may even spin violently. The operation method is the same for both front-wheel-drive and rear-wheel-drive cars—steer in the direction of the skid. Remember, never press the brake.

7

3

Share

Do You Need to Press the Accelerator When Reversing in an Automatic Transmission Car?

When reversing in an automatic transmission car, you do not need to press the accelerator. Simply manage the brake to prevent the car from moving too fast and colliding with other vehicles. Here is an introduction on whether you need to press the accelerator when reversing in an automatic transmission car: 1. An automatic transmission has at least four gears: P, R, N, and D, which stand for Park, Reverse, Neutral, and Drive, respectively. In P and N gears, the power transmission in the gearbox is cut off, and the P gear also locks the output shaft to prevent the car from moving. When shifting from P to any other gear, the car must be completely stopped. Similarly, when shifting from any other gear to P, the car must also be stopped. 2. Since an automatic transmission does not have a clutch, the car will move even without pressing the accelerator after shifting into Drive, with a speed of approximately 15 km/h. Therefore, if you want to move at a very slow speed, you should use the brake to reduce the car's speed.

15

1

Share

What is the 0-100 km/h acceleration time of the Emgrand GS 1.4T?

According to official data, the 0-100 km/h acceleration time of the Emgrand GS 1.4T is 13.13 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque generally represents how strong the force is. The greater the torque, the stronger the force pushing the vehicle, and naturally, the faster the acceleration. The Emgrand GS 1.4T has a maximum torque of 255 N·m, with a 0-100 km/h acceleration time of 13.13 seconds. Transmission efficiency: The transmission is the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Emgrand GS 1.4T is equipped with a CVT continuously variable transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Emgrand GS 1.4T has a power-to-weight ratio of 100 Hp/T, with a 0-100 km/h acceleration time of 13.13 seconds.

5

2

Share

Can China VI Vehicles Use China V Gasoline?

China VI vehicles can use China V gasoline. The government has taken this into consideration, and both Sinopec and PetroChina have made preparations for fuel upgrades. It is expected that fuel meeting the China VI emission standards will be available before the implementation of the China VI standard. Here is some information about gasoline: 1. Gasoline is produced and sold according to its octane rating, which is specified by national gasoline product standards and varies with different standards. Currently, China IV gasoline has three octane ratings: 90, 93, and 97. China V gasoline has ratings of 89, 92, and 95. 2. Gasoline grades are classified by octane number. For example, 97-octane gasoline refers to a fuel with anti-knock performance equivalent to a mixture of 97% isooctane and 3% n-heptane. The higher the octane number, the better the anti-knock performance. Different octane ratings should be selected based on the engine's compression ratio, as specified in each vehicle's manual. Mid-range cars with a compression ratio between 8.5 and 9.5 should generally use 90-octane China IV gasoline, while cars with a compression ratio above 9.5 should use 93-octane China IV gasoline.

18

1

Share

What happens if a motorcycle is caught on the highway?

Is it necessary to fully cover the car trunk?

What to Do When Car Wiper Blades Don't Return to Position?

What to Do When a Car Skids?

Do You Need to Press the Accelerator When Reversing in an Automatic Transmission Car?

What is the 0-100 km/h acceleration time of the Emgrand GS 1.4T?

Can China VI Vehicles Use China V Gasoline?

Why is the engine yellow light on?

What to Do When You Can't Find Your Car Keys Inside the Car?

How to Turn On the Heated Rearview Mirror on the Lynk & Co 06?

How to Deal with Engine Hydrolock?