What Happens If a Car Is Left Outside Exposed to Sun and Rain for a Long Time?

Can ETC Receive Signals When Placed on the Dashboard?

ETC can receive signals when placed on the dashboard. ETC is an electronic toll collection system that allows vehicles to pass through toll stations without stopping. It uses onboard equipment to identify vehicles, record information, and automatically deduct the corresponding funds from a pre-linked bank account. This system is used for electronic tolling on roads, bridges, and tunnels. The installation method for ETC is as follows: 1. Check the ETC card and electronic tag for any damage. Press the anti-tamper button on the back of the electronic tag, and a red light will briefly illuminate. If the OLED screen displays 'Tag Invalid, Please Insert Card,' it indicates the device is functioning properly. 2. Clean the front windshield, peel off the protective film of the electronic tag, and stick it to the installation position, pressing firmly for about 2 to 3 minutes. 3. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is properly inserted into the electronic tag device.

9

1

Share

What is the ETC installation method?

ETC installation method: Sensor installation. ETC devices are uniformly installed on the front windshield inside the car, next to the center rearview mirror. They come with plastic suction cups to attach to the windshield. Choose an installation location that does not obstruct the front view while driving. Sensor wiring installation. Plug the sensor's wiring harness connector into the sensor's connection port. The wiring harness is connected through the vehicle's internal network, branching out from the car's intelligent information system. Wrap the wiring harness along the interior roof trim panel without removing the interior trim—simply press it into place by hand to effectively conceal the wiring. Insert the card into the ETC sensor. Gently insert the side of the card with the chip facing forward into the ETC sensor's card slot. The sensor detects the chip and reads the express card. If the card is inserted correctly, the sensor's display will light up after detecting the ETC express card, showing the message "Start billing," indicating a successful connection between the sensor and the express card. ETC working principle: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the toll station's ETC lane, computer networking technology is used for backend settlement processing with the bank. This allows vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees.

14

1

Share

What Are the Effects of Bad Car Bearings?

The effects of bad car bearings include: 1. Abnormal friction between the brake drum and brake pads, significantly increasing driving resistance, causing poor rolling, and leading to a decrease in power; 2. Affecting comfort, causing the vehicle to pull to one side and increasing tire noise; 3. Damaging the suspension, causing wheel mechanism failure and potential wheel detachment, leading to steering system malfunction. Methods to detect damaged car bearings are: 1. A buzzing sound during driving with increased noise; 2. Placing the left hand on the shock absorber spring and rotating the tire with the right hand—if the left hand senses significant vibration, the front wheel bearing is damaged; 3. Generating high heat, making the bearing feel hot to the touch; 4. Steering wheel vibration during driving. Causes of car bearing damage include: 1. Improper assembly and adjustment, with axial clearance being too tight; 2. Poor lubrication, causing dry friction between the roller and raceway, leading to bearing sintering; 3. Quality issues with the bearing itself; 4. Unclean installation or foreign matter in the lubricant; 5. Poor shape of the bearing housing.

6

0

Share

What is the minimum speed limit on the highway fast lane?

The minimum speed limit on the highway fast lane varies depending on different situations: For roads with 2 lanes in the same direction, the minimum speed on the left lane is 100 km/h; For roads with 3 or more lanes in the same direction, the minimum speed on the far left lane is 110 km/h, while the middle lane has a minimum speed of 90 km/h. Important precautions for highway driving include: 1. Both the driver and front-seat passenger must fasten their seat belts, and the driver should not use mobile phones while driving; 2. Avoid making sudden steering wheel movements at high speeds; 3. Do not change lanes arbitrarily - when needing to change lanes or overtake, turn signals must be activated in advance; 4. Overtaking is only permitted using adjacent lanes, and vehicles must return to the driving lane immediately after overtaking - driving straddling or pressing against lane dividers is prohibited; 5. Reversing, driving against traffic, making U-turns or turns across the central divider, test driving, driving instructional vehicles, as well as overtaking or parking on ramps are all prohibited.

19

2

Share

Which country produces Chevrolet?

Chevrolet is produced in the United States. Chevrolet is an automobile brand under General Motors Company (GM), founded on November 3, 1911, by William C. Durant and Louis Chevrolet. It was acquired by General Motors in 1918. Main models include Camaro, Cavalier, Malibu, Cruze, Trax, Colorado, and Blazer, among others. Taking the Malibu XL as an example, the Malibu XL is a mid-size sedan with a length, width, and height of 4933mm, 1854mm, and 1472mm respectively, and a wheelbase of 2829mm. The Malibu XL is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 165 horsepower and a maximum torque of 250 Nm. This engine reaches its maximum power at 5600 rpm and its maximum torque between 1700 to 4400 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 9-speed automatic transmission (9AT). The 2.0-liter turbocharged engine produces 237 horsepower and a maximum torque of 350 Nm. It achieves its maximum power at 5000 rpm and its maximum torque between 1500 to 4000 rpm. Similar to the 1.5-liter engine, it incorporates direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. This engine is also matched with a 9-speed automatic transmission (9AT).

11

2

Share

Does running through a prolonged yellow light count as running a red light?

Running a yellow light and running a red light are both considered the same traffic violation—driving a motor vehicle in violation of traffic signal regulations. According to the "Road Traffic Safety Law of the People's Republic of China," this offense is punishable by a fine and a deduction of 6 points from the driver's license. The "Road Traffic Safety Law of the People's Republic of China" Article 26 states: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. The "Road Traffic Safety Law" stipulates: A yellow light serves as a warning, and motor vehicles should slow down when approaching an intersection. If a vehicle has already crossed the stop line when the yellow light turns on, it may continue to pass; otherwise, it should stop. The "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China" Article 38 specifies for motor vehicle and non-motor vehicle signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle signal indications. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Electronic traffic enforcement cameras capture red-light running based on the following three photos, which are reviewed by traffic police to determine whether a violation occurred: An image showing the vehicle has not passed the stop line when the red light is on. An image showing the vehicle's front wheels pressing against the stop line. An image showing the entire vehicle body has crossed the stop line. If these three photos demonstrate that the vehicle moved beyond the stop line while the red light was on, the traffic police can confirm the vehicle ran a red light during review. To avoid running a yellow light: Slow down when approaching an intersection, maintain a speed of 20–30 km/h, keep a safe distance from the vehicle ahead, and avoid tailgating or rushing through a yellow light. Alternatively, pay attention to the traffic signals in advance; observe the duration of the green light—if traffic is light and the green light lasts longer, prepare to slow down.

16

3

Share

What Happens If a Car Is Left Outside Exposed to Sun and Rain for a Long Time?

Can ETC Receive Signals When Placed on the Dashboard?

What is the ETC installation method?

What Are the Effects of Bad Car Bearings?

What is the minimum speed limit on the highway fast lane?

Which country produces Chevrolet?

Does running through a prolonged yellow light count as running a red light?

Where is the Altima steering gear cover located?

Which button controls the automatic start-stop function in the Verano?

How to Remove the Car Key for a Buick?

How Long Should a Car Battery Charge Before Starting the Vehicle?