What grade of gasoline should the T-Roc use?

Are the official exam and mock exam for Subject 1 the same?

Subject 1 exam questions are identical to those in mock exams. The content of Subject 1 comes from the question bank of the vehicle management office. Mock questions are also sourced from the updated Subject 1 exam question bank maintained by the Ministry of Public Security, making the exam questions the same. Additional information: 1. Subject 1 exam content: Subject 1, also known as the theoretical exam or driver's theory test, is part of the motor vehicle driver's license assessment. The exam covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is computer-based, consisting of 100 questions, with a passing score of 90 or above. 2. Subject 1 exam duration: The total time for the Subject 1 exam is 45 minutes. The exam paper consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 and a passing score of 90.

8

1

Share

What is the appropriate speed for high-speed turns?

When navigating sharp turns, the maximum driving speed should not exceed 30 kilometers per hour. Here is additional information: 1. Turning based on terrain: When turning a vehicle, it is essential to fully estimate the vehicle's minimum turning radius and the difference in wheel paths, especially during sharp turns or when towing trailers or semi-trailers. Pay attention to preventing the outer front wheel from going off the road or colliding with obstacles, and avoid the inner rear wheel dropping into a ditch or hitting obstacles. 2. Precautions during turns: When turning, reduce the vehicle speed and avoid steering too sharply to prevent excessive centrifugal force that could cause the vehicle to skid. If the vehicle begins to skid, immediately release the accelerator pedal and steer the wheel toward the direction of the skid. Once the vehicle regains straight-line stability, straighten the steering wheel and continue driving. It is advisable to avoid using the brakes during turns, especially emergency braking, to prevent skidding or accidents.

17

1

Share

What lights to use when facing oncoming traffic at night?

Use low beam lights when facing oncoming traffic at night. When encountering oncoming traffic: If low beams were already in use, no adjustment is needed; if high beams were previously on, they should be switched to low beams in advance. Otherwise, high beams may prevent the oncoming driver from accurately judging your vehicle's width, potentially causing accidents. After passing the oncoming vehicle, assess road conditions to determine whether to switch back to high beams. When overtaking, use turn signals: Activate the turn signal in advance, then honk and rapidly toggle between high and low beams to alert the vehicle ahead. After confirming the leading vehicle has no intention of changing lanes, execute the overtaking maneuver promptly. Avoid prolonged side-by-side driving. Upon completing the overtake, when sufficient distance from the overtaken vehicle has been established, activate the turn signal and return to the original lane by moving right.

10

5

Share

What Causes the Slow Response of Sensor Lights?

It may be due to design reasons. To prevent frequent activation of headlights caused by short-term obstructions like tree shadows, the design intentionally incorporates a delay of about ten seconds before the headlights automatically turn on. If you find the visibility too poor when entering a tunnel before the headlights have time to activate, you can manually turn them on. Below is additional information about radar sensor lights: 1. Doppler Module: The Doppler module consists of a microwave transistor, resistors, capacitors, and a printed antenna. During operation, it emits microwave signals into the surrounding space. The Doppler signal processing circuit is usually composed of a low-power BISS0001 IC, which determines the sensitivity and delay time of the sensor light. For easy adjustment, radar sensor switches generally include potentiometers for adjusting the sensing distance and delay time, with access windows on the casing. 2. Radar Sensor Switch: Radar sensor switches can be used for the sensor control of incandescent, fluorescent, and LED lights, with a control range of up to 8m. These radar sensor switches feature light control and allow adjustment of the sensing distance and delay time.

19

3

Share

How many cubic meters of soil can an 8-wheel rear truck carry?

An 8-wheel rear truck can carry 23 cubic meters of soil. Calculating vehicle capacity: Measure the dimensions of the cargo compartment (length × width × height) to calculate the volume of soil the truck can transport in one trip. Vehicle configuration: Hydraulically controlled rear cover opening and closing system, equipped with replaceable trapezoidal sealing rubber rings. Additional manual backup locking devices are installed on both sides at the lower part of the rear cover to ensure complete sludge containment without leakage. Driving tips: For 8-wheel rear truck maintenance, the most routine service item is regular replacement of the three filters. These filters are designed to better protect the engine and extend its service life as much as possible. The three filters refer to the fuel filter, air filter, and oil filter, which function to remove impurities from gasoline, air, and engine oil respectively, preventing contaminants from entering the engine interior. It is recommended that owners replace the oil filter according to the prescribed maintenance intervals.

13

3

Share

What does it mean when the airbag detonation device exceeds the upper limit?

Airbag detonation device exceeding the upper limit refers to a fault code indicating excessive resistance in the airbag control unit. Reasons for excessive resistance in airbags: Loose airbag connectors - If the wiring harness connector under the seat is loose, simply reconnect each one firmly. Damage to the clock spring (slip ring) in the steering column, or damage to the main airbag in the steering wheel. Side airbags are installed on the outer side of car seats and function to deploy during side impacts, protecting passengers from lateral collision forces. Definition of airbags: An airbag is a device that inflates to protect occupants before secondary impact occurs during a collision. As a supplemental restraint system (SRS) to seat belts, the airbag system consists of: an integrated airbag module containing the cushion and inflator (gas generator), impact sensors that detect collisions and trigger deployment, and wiring harnesses that transmit sensor signals.

7

2

Share

What grade of gasoline should the T-Roc use?

Are the official exam and mock exam for Subject 1 the same?

What is the appropriate speed for high-speed turns?

What lights to use when facing oncoming traffic at night?

What Causes the Slow Response of Sensor Lights?

How many cubic meters of soil can an 8-wheel rear truck carry?

What does it mean when the airbag detonation device exceeds the upper limit?

What are the new driving test regulations effective from August 1st?

What are the speed limits for the two lanes?

How to Determine if the Car is in the Middle of the Road in Subject Three?

How to set up the audio system in the Lynk & Co 03?