···
Log in / Register

What grade of gasoline should Hyundai ix35 use?

4 Answers
DeTyler
08/29/25 7:29am

Hyundai ix35 uses 92-octane gasoline. Introduction to engine oil: Engine oil grades: Grades include two parts: classification and viscosity specification. Engine oil grades usually indicate viscosity and quality. The viscosity of lubricating oil is mostly identified using SAE grade levels. Functions of engine oil: The functions of engine oil include lubricating pistons and cylinders, assisting in cooling and temperature reduction, sealing to prevent leaks, and preventing excessive wear of parts, which requires the establishment of an oil film between two sliding surfaces. A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby achieving the goal of reducing wear; when the engine is running, the engine oil can bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine. What really cools the engine is the water outside the engine casing; engine oil can form a sealing ring between the piston rings and the piston, reducing gas leakage and preventing external pollutants from entering. Precautions: When adding engine oil, the amount should be slightly lower than the standard scale. Too much engine oil will increase the rotational resistance of the crankshaft, reduce the output power of the engine, and excessive engine oil may enter the combustion chamber and participate in combustion, causing the vehicle to burn oil, emit blue smoke, and even increase fuel consumption.

Was this review help?
17
1
Share
VonEmmett
09/11/25 5:02am

I've been driving a Hyundai ix35 for many years and always use 92-octane gasoline. This car is basically designed for this grade, with high engine compatibility, smooth acceleration and no engine damage. Of course, you can use 95-octane, but it's unnecessary to spend more money. When refueling, choose regular gas stations to avoid carbon buildup caused by poor fuel quality. Remind everyone to check the fuel tank cap or manual - if it recommends 92-octane, that's fine. Don't be fooled into wasting money on higher grades. Fuel-saving tip: avoid slamming the accelerator, keep the RPM steady at around 2,000, and you can get over 500 kilometers per tank - economical and practical. During maintenance, check the spark plugs to prevent poor fuel quality from affecting ignition. Simple self-checks on car conditions can avoid major repair troubles. Safe driving habits are also important, especially on highways - check all lights to ensure they're working.

Was this review help?
18
3
Share
Expand All
DiJayce
10/25/25 5:52am

For the Hyundai ix35, choosing 92-octane gasoline is the most cost-effective option. The regular engine version is compatible with 92-octane fuel, which provides sufficient octane to prevent knocking. While 95-octane is over 1 yuan more per liter, the performance improvement is minimal. Switching to 92-octane can easily save you dozens of yuan per month—enough for a pack of cigarettes. It's recommended to refuel at reliable stations like Sinopec or PetroChina, as low-quality gas from unknown brands may contain impurities that trigger the check engine light. For long-term savings: plan routes to avoid traffic congestion, replace the air filter regularly to improve fuel efficiency, and maintain a tested urban fuel consumption of around 8L/100km, which is quite economical. The engine is tuned for fuel efficiency, so avoid mistakenly filling with diesel or lower-octane fuel to prevent engine knocking. Regularly check and maintain recommended tire pressure—this not only saves fuel but also reduces tire wear, killing two birds with one stone.

Was this review help?
15
4
Share
Expand All
MaximusLynn
12/08/25 6:16am

It is correct to directly use 92 octane gasoline for the ix35, as the engine is designed to this standard. Using the wrong octane rating, such as 95 octane, would be a waste of money or may not suit the engine's compression ratio, potentially causing knocking noises and affecting daily smooth driving. The fuel tank cap indicates the recommended octane rating, and following it ensures safety.

Was this review help?
19
4
Share
Expand All
More Forum Discussions

Are Oil Filters and Oil Filter Elements the Same?

Oil filters and oil filter elements are the same. The function of an oil filter is to remove impurities, gums, and moisture from the oil, delivering clean oil to various lubrication points. If the oil is not filtered and directly enters the lubrication circuit, the impurities contained in the oil will be carried to the friction surfaces of moving parts, accelerating wear and reducing the engine's lifespan. Due to the high viscosity of the oil itself and the high content of impurities, oil filters generally have three stages to improve filtration efficiency: the oil suction filter, the oil coarse filter, and the oil fine filter. The suction filter is installed in the oil pan before the oil pump; the oil coarse filter is installed after the oil pump and is connected in series with the main oil passage; the oil fine filter is installed after the oil pump and is connected in parallel with the main oil passage.
6
4
Share

What does a yellow license plate vehicle mean in Shanghai?

In Shanghai, yellow license plate vehicles typically refer to large vehicles, such as trucks weighing over 2 tons or buses (including vans with 12 or more seats). Most commercial vehicles and motorcycles also have yellow license plates. Below is a detailed introduction to yellow license plate vehicles: Scope of application: Yellow license plate vehicles are applicable to large automobiles (such as tanker trucks, cargo trucks, and semi-trailer tractors); trailers (full trailers and semi-trailers not permanently attached to tractors); ordinary motorcycles and training motorcycles; vehicles used for agricultural purposes; low-speed vehicles (three-wheeled automobiles, wheeled self-propelled machinery, and low-speed cargo trucks); ordinary M2-class light buses; medium and large buses; cargo trucks with a load capacity of over 1.0 tons; vans with 10 or more seats; and prototype test vehicles. Notes: For heavy and medium cargo trucks, and semi-trailers carrying goods, the height from the ground must not exceed 4 meters; for vehicles carrying containers, the height must not exceed 4.2 meters; for other motor vehicles carrying goods, the height from the ground must not exceed 2.5 meters.
12
5
Share

What is the installation method for car seat covers?

The installation method for car seat covers is as follows: 1. Slide the front backrest cover downward, insert the cover's clip directly into the seat gap, and pull it out from the back of the seat; 2. Lift the seat headrest, expose the reserved opening and fasten the metal buckle, then put on the head cap; 3. Lay the bottom seat cover flat on the seat, insert the clip into the seam at the bottom of the seat, and then fasten it to the side elastic band; 4. Hook the vest elastic band and use the metal hook attached to the seat cover to hook it at the bottom. Car seat covers can protect the original car seats from drying out and keep them clean, preventing leather aging. Be careful not to let sharp objects scrape or scratch them. Regularly adjust the car seat covers to avoid wrinkles and ensure they remain neat and well-fitted.
9
0
Share

What is the difference between Accord and Civic?

The differences between Accord and Civic are: 1. Different positioning: Accord is a compact car; Civic is a midsize car. 2. Different dimensions: The length, width, and height of the Accord are 4930mm, 1845mm, and 1470mm respectively; the length, width, and height of the Civic are 4930mm, 1845mm, and 1470mm respectively. 3. Different wheelbases: The wheelbase of the Accord is 2775mm; the wheelbase of the Civic is 2700mm. Both are cars under GAC Honda. Honda is a multinational automobile manufacturer listed on both the Tokyo Stock Exchange and the New York Stock Exchange. The 'H' in its logo is the first letter of Honda in English, reflecting the characteristics of technological innovation, solid employees, and robust management.
10
4
Share

How to Install Car Mud Flaps?

The installation method for car mud flaps is as follows: 1. Prepare mud flaps that match the car model, pliers, a screwdriver, corresponding screws, nuts, etc.; 2. Clean the installation area with a damp cloth to facilitate removal; 3. Locate the pre-installed screws and nuts on the car, remove them using tools, and take off the original mud flaps; 4. Position the new mud flaps correctly, then use tools to tighten the screws into the screw holes one by one—ensure the screws are tightly secured; 5. Install the remaining three mud flaps following the same steps. For the front wheels, turning the steering wheel left or right provides enough space to use tools, making installation easier. For the rear wheels, due to limited space, a screwdriver may not be practical—use a jack to lift the rear wheels for easier installation.
19
3
Share

What is the Chinese name for Nissan Murano?

Nissan Murano is called Nissan Loulan in Chinese. It is Nissan's first large crossover SUV with dimensions of 4860mm in length, 1885mm in width, and 1730mm in height, and a wheelbase of 2825mm. The vehicle is equipped with a 3.5L CVT engine, a 6-speed automatic transmission, and features front-engine, four-wheel drive. The Murano comes with high-end features such as automatic climate control, rain-sensing wipers, power windows front and rear, ambient interior lighting, headlight washers, an 8-speaker audio system, a color central control screen, an iPod interface, an LCD screen on the center console, and dual-zone climate control.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.