What grade of gasoline should a Cadillac SRX use?

1 Answers
ZoeRose
07/29/25 10:05am
Cadillac SRX uses 97-octane gasoline. It is recommended to follow the fuel grade specified in the user manual. 97-octane gasoline is suitable for gasoline-powered vehicles with an engine compression ratio between 10 and 11.5. Using the wrong gasoline may damage the engine and cause it to malfunction. The Cadillac SRX is a mid-size SUV with body dimensions of 4851mm in length, 1910mm in width, and 1663mm in height, and a wheelbase of 2807mm. In terms of power, the Cadillac SRX is equipped with three engines: a 3.0L naturally aspirated engine, a 3.6L naturally aspirated engine, and a 4.6L naturally aspirated engine.
Was this review help?
13
0
Share
More Forum Discussions

What is the minimum ground clearance of a Ford Mustang?

The ground clearance of the Ford Mustang is 147mm. For the car's positioning, this distance is relatively safe. As long as the car doesn't fall into a large pit or hit a big rock, it basically won't scrape the car's chassis. Here is the related introduction: Definition of minimum ground clearance: Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the ground when the car is fully loaded and stationary. It is used to express the car's ability to pass over obstacles such as stones without collision. The relationship of ground clearance size: Generally, the smaller the ground clearance, the lower the ability to pass over obstacles. Therefore, the ground clearance of sedan models is generally small because they usually drive on flat urban roads. The design of the minimum ground clearance must consider the car's passability during driving, and there are certain limits to the minimum ground clearance value of each car model.
8
5
Share

Do New Energy Vehicles Pay Purchase Tax?

The Ministry of Finance, State Taxation Administration, and Ministry of Industry and Information Technology jointly issued the "Announcement on Policies Regarding Exemption of Vehicle Purchase Tax for New Energy Vehicles". The "Announcement" states that from January 1, 2021 to December 31, 2022, the purchase of new energy vehicles will be exempt from vehicle purchase tax. In addition, the "Announcement on Policies Regarding Exemption of Vehicle Purchase Tax for Non-Transport Special Operation Vehicles with Fixed Devices" has also been officially implemented since January 1, 2021. The "Announcement" lists 57 types of special vehicles, including oil recovery vehicles, test derrick vehicles, and substation semi-trailers, in the "List". Currently, new energy vehicles are divided into hybrid and pure electric, with hybrids further categorized into plug-in hybrids and non-plug-in hybrids. Hybrid models, as long as they are not plug-in hybrids, still need to pay purchase tax. Pure electric and plug-in hybrid vehicles are exempt from purchase tax. If you purchase a pure electric new energy vehicle, you do not need to pay purchase tax or vehicle and vessel tax. The state strongly supports the purchase of new energy vehicles with significant incentives. Hybrid vehicles typically use high-voltage batteries, which are theoretically similar. However, in practice, there are significant differences. Mild hybrid models, due to their short pure electric driving range, often use 48V DC batteries. The total voltage and power vary depending on the type of battery and connection method used.
12
0
Share

What is the approximate tire pressure for winter tires?

Winter tire pressure is between 2.2—2.5 bar, with the specific value based on the manufacturer's recommendation. Recommended pressure can usually be found in the following locations: the vehicle's user manual, the label near the driver's side door (B-pillar area), the drawer next to the driver's seat, or the fuel tank cap door. Compared to regular tires, the key technology of winter tires lies in the tread compound formulation and tread pattern design. Winter tires use special compounds to increase friction on snow and ice-covered roads, with the advantage of improving driving safety in snowy conditions.
5
5
Share

What are the differences between BMW M series?

BMW M series differences are as follows: BMW 1M: In 1982, BMW manufactured the first generation of high-performance BMW 5 Series, equipped with a 3.6-liter inline 6-cylinder engine producing 284 horsepower. Starting from the mid-1980s, BMW Motorsport GmbH shifted its focus to the development and marketing of standard sedan racing and mass-produced M series road sports cars. BMW M5: In 1988, BMW began production of the second-generation M5 sports sedan, developed on the E34 platform 5 Series four-door sedan. It featured two inline 6-cylinder engines with displacements of 3.6 liters and 3.8 liters, delivering maximum power outputs of 315 horsepower and 340 horsepower respectively. BMW M6: As the new flagship of the BMW M series, the M6 embodies the pinnacle of BMW's sports performance. The latest M6 is powered by a 5.0-liter V10 engine, producing a maximum horsepower of 507 and a peak torque of 520 Nm, with 450 Nm available at just 3500 rpm. This 90-degree V10 engine utilizes an aluminum-silicon alloy cylinder block, with the entire engine weighing only 240 kg.
19
4
Share

Where is the spare tire for BMW?

New BMW models do not come equipped with a spare tire because they use run-flat tires. The advantage of run-flat tires is that they enhance driving feel and handling, as removing the spare tire reduces overall vehicle weight. Run-flat tires have thicker sidewalls, resulting in a firmer road feel. Relevant information about tires is as follows: When purchasing tires, always check the production date: If the production date is from a long time ago, do not purchase them. Tires are rubber products, and even if unused, they can age. During regular use, frequently check tire pressure and inspect the tire surface for damage: The sidewalls of tires are relatively fragile, and if they are cut or punctured, they cannot be repaired. It is recommended that car owners replace their tires every four years, even if the mileage driven within those four years is minimal.
20
1
Share

What is the fuel consumption of the Honda Fit?

The fuel consumption of the Honda Fit ranges from 5.3 to 5.7L/100km. Factors affecting fuel consumption are as follows: Bumpy roads increase fuel consumption: If the road is congested or uneven, forcing the vehicle to drive in low gear for extended periods, fuel consumption will inevitably increase; Using the trunk as storage increases fuel consumption: Treating the trunk as a storage space and stuffing it with unnecessary items increases the vehicle's weight. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in vehicle weight can lead to a corresponding percentage decrease in fuel consumption; Incorrect driving habits can double or triple fuel consumption: Improper driving habits have the greatest impact on fuel consumption. During driving, especially in traffic jams, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.