What grade of gasoline does the Paladin use?

1 Answers
SanAlana
07/25/25 4:55am
The Paladin uses 92-octane gasoline. 92-octane gasoline refers to gasoline with an octane rating of 92. The primary criterion for selecting gasoline grade is the engine's compression ratio, which is also a core energy-saving indicator in modern vehicles. The gasoline grade does not indicate quality but rather the proportion of iso-octane, which affects the gasoline's anti-knock properties. The Paladin is a compact SUV under the Nissan brand. The vehicle's dimensions are 4545mm in length, 1840mm in width, and 1880mm in height, with a wheelbase of 2650mm. In terms of power, the Paladin is equipped with two engines: a 2.4-liter naturally aspirated engine and a 3.3-liter naturally aspirated engine.
Was this review help?
19
4
Share
More Forum Discussions

What to Do with China 5 New Cars After China 6 is Implemented?

After the implementation of the China 6 standard, China 5 vehicles can still be driven as usual. Here are the specific details about China 5 and China 6: Impact: After the China 6 standard is introduced, it will accelerate the depreciation of China 5 vehicles. In some regions, after the China 6 standard is enforced, license plates will no longer be issued for China 5 vehicles. Therefore, consumers should consult carefully before purchasing a car to avoid the situation where they cannot get a license plate after buying the vehicle. Below is additional information: 1. Emission standards: Compared to China 5, the China 6 standard imposes stricter requirements on carbon monoxide, nitrogen oxides, and hydrocarbons in emissions. Additionally, the China 6 standard introduces a new regulation for PN particulate matter. 2. Fuel aspect: During the China 5 phase, the emission standards for diesel and gasoline vehicles were different. However, China 6 adopts a fuel-neutral principle, meaning that regardless of the fuel type, the emission limits are the same.
11
5
Share

What is the difference between Cayenne and Macan?

Differences between Cayenne and Macan are as follows: Differences in styling: The Cayenne and Porsche Macan share very similar styling, with noticeable differences in body length and height, while the width and wheelbase, which more significantly affect space, are quite similar. Compared to the Cayenne, the Macan has a lower visual profile, a smoother hood, and outstanding visual appeal. At the rear, the Macan has a lower visual center of gravity than the Cayenne, with its taillights being a highlight—more dynamic compared to the slightly bulkier taillights of the Cayenne. The rear window has a steeper angle, enhancing the sporty feel. Differences in interior: The interior designs of the Cayenne and Macan both largely follow Porsche's family style, but the Cayenne's beige interior appears more luxurious, while the Macan leans more towards sportiness. In terms of comfort features, the Macan's biggest advantage is the addition of a panoramic sunroof and heated exterior mirrors. Entertainment features are quite similar between the two models.
9
0
Share

How often should truck gear oil and rear axle oil be changed?

Generally, the gear oil for trucks should be changed every 60,000 kilometers to effectively improve the efficiency of gear transmission of engine power. There is no specific regulation for the replacement cycle of rear axle oil, which should be determined based on the driving conditions and environment of the vehicle. Additionally, different oil brands may have varying intervals, but typically it should be changed every 20,000-30,000 kilometers. Below is the relevant introduction: 1. Gear oil: Mainly refers to the lubricating oil for the transmission and rear axle. It differs from engine oil in terms of usage conditions, composition, and performance characteristics. Gear oil primarily serves to lubricate gears and bearings, prevent wear and rust, and assist in heat dissipation for the gears. 2. Rear axle oil: During maintenance, it should be removed, cleaned, and unclogged to ensure smooth airflow in the passages, which can prevent increased pressure inside the axle housing due to blocked passages and subsequent oil leakage at the mating surfaces and seals.
6
2
Share

In which year was the Volkswagen Lavida Plus launched?

The Volkswagen Lavida Plus was officially launched on May 25, 2018. Introduction to the model's configurations: The Lavida Plus comes standard with an automatic start-stop system and Auto-Hold function; the new car is also equipped with features such as automatic parking, electronic handbrake, leather seats, one-key start, dual-zone automatic air conditioning, rear air vents, and rear USB charging ports. Introduction to the model's powertrain: In terms of power, the Lavida Plus is equipped with three engines: 1.2T/1.4T/1.5L, with maximum power outputs of 116 horsepower, 150 horsepower, and 116 horsepower respectively. For the transmission system, the Lavida Plus is paired with the existing 5-speed manual, 6-speed automatic manual, and 7-speed dual-clutch transmissions.
9
4
Share

What are the items included in the second maintenance of a vehicle?

The second maintenance of a car includes: 1. Changing the engine oil and filter: The second maintenance will definitely involve changing the engine oil. The oil used by 4S shops is generally semi-synthetic, which is of lower quality than fully synthetic oil. If needed, you can request to change to fully synthetic oil, but this will require additional payment. While changing the oil, the condition of the oil filter will also be checked, and it will be replaced if necessary. 2. Inspecting the engine and other components: The second maintenance also involves checking the engine's working condition. This includes checking whether the pipe connections are normal, if there are any leakage points, whether the engine sound is normal, and if there are any abnormal noises. Additionally, the vehicle will be lifted to inspect the chassis components for scratches or corrosion, as well as checking the braking system, suspension system, and the inner side of the tires to ensure safety in future use.
2
0
Share

What is the fuel consumption of the Mercedes-Benz C hybrid?

The combined fuel consumption of the Mercedes-Benz C hybrid system is 6.3L/100km. The factors affecting the car's fuel consumption are as follows: Road conditions: Potholes on the road will increase fuel consumption, and driving in low gear for a long time will inevitably increase fuel consumption. Luggage weight: Placing too heavy items in the luggage compartment will increase fuel consumption. Driving habits: Incorrect driving can increase fuel consumption by 2 to 3 times. Driving speed: Driving at high speed in low gear will increase fuel consumption. Maintenance status: Not maintaining the engine will increase fuel consumption. Abnormalities in the engine ignition system also have a significant impact on fuel consumption, such as inaccurate ignition timing, leakage in the high-voltage line, and weak ignition caused by spark plug carbon deposits, all of which will reduce the engine's combustion efficiency and increase fuel consumption.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.