What grade of gasoline does the Lexus UX use?

2 Answers
McKathryn
07/29/25 12:51am
Lexus UX uses 92-octane gasoline. 92-octane gasoline is composed of 92% isooctane and 8% n-heptane. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum, used as fuel, and appears as a transparent liquid. Taking the 2020 Lexus UX as an example, its front suspension is a MacPherson independent suspension, the rear suspension is a multi-link independent suspension, equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 173ps, maximum torque of 207Nm, and maximum power of 127kW.
Was this review help?
9
1
Share
McAva
08/12/25 5:02am
I've been driving a Lexus UX, and the manual clearly recommends using 95-octane or higher gasoline because it has a high-compression engine that requires high-octane fuel to prevent knocking and power loss. Using 92-octane might save some money in the short term, but it will lead to carbon buildup, engine damage, and even shorten the engine's lifespan over time. I've tried 92-octane a few times, and the throttle response noticeably slowed down, while fuel consumption increased—repairs ended up being more expensive. Always check the fuel pump for the 95 or 98 labels when refueling, and choose reputable gas stations to ensure quality. Fuel octane standards vary by region, so sticking with 95-octane is the safest choice in China. Checking fuel levels before long trips can help avoid trouble.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

How to Remove and Install the Front Shock Absorber on a BMW 3 Series?

First, lift the vehicle and place safety stands. Prepare tools including a torque wrench, remove the tire, and loosen the three fixing nuts on the top mount. Disconnect the stabilizer bar link and the shock absorber connection. If it's too tight, use a pry bar to remove it. Disconnect the connection to the steering knuckle, as well as the brake hose and ABS line fixing screws. Remove the decorative panel, then remove the rear shock absorber by loosening the fixing screws of the lower control arm and the steering knuckle, as well as the rear anti-roll bar bushings. Remove the old shock absorber and install the new one. After installing the shock absorber, tighten the threaded connections according to the vehicle's specifications to ensure they are secure and reliable. Apply anti-rust paint to the tightened areas.
17
3
Share

How to Turn Off Ford Alarm Announcement?

Driver first opens the car door, enters the car cockpit, then steps on the brake to prepare to start the car. Press the one-button start button to start the car. After the car starts, the dashboard lights up, observe the alarm light. Collision prevention warning, protects the owner, prevents driving fatigue, when there is a collision risk or deviation from the road, there will be intermittent light braking or warning sound to remind the owner. Press the cruise control button located inside the left combination switch of the Audi A6 to turn off the cruise control system of the Audi A6, and the Audi alarm is also deactivated.
1
0
Share

Classic Focus Key Battery Replacement Tutorial?

First, eject the metal mechanical key; otherwise, you won't be able to open the key shell. So, press the physical button to eject the mechanical key. Turn the key sideways, and at the spot marked by the red arrow (1), gently pry open the key shell by lifting up at (2) along the gap. After separation, the 'head' and 'tail' of the key can be stood up. You can then lift the key cover from the gap on the back of the key. Once opened, you can proceed to replace the battery. Finally, reassemble the key.
13
5
Share

How to Repair Scratches on Car Tires?

Before starting the repair, make sure to clean the wheel hub thoroughly. After cleaning, remember to dry it with a towel. First, use fine-grit sandpaper to rub the scratched area back and forth until the rough scratches become smooth. When applying spray paint, do it in multiple thin coats rather than one thick coat to avoid dripping or pooling. Gently wipe the area with engine oil to make the scratches less visible, then use a specialized plastic polish for polishing, which works by lightly sanding the surface.
18
0
Share

How to Perform Vehicle Annual Inspection on Mobile Phone?

Through [Business Center] → [Apply for Inspection Exemption Mark], users can apply for an inspection exemption mark for their registered vehicles. Users select the vehicle for which they want to apply for the inspection exemption mark. Click [Read and Agree] to enter the vehicle information confirmation page. After confirming the information is correct, obtain the SMS verification code on your phone. After verification, click the [Submit] button to complete the application for the inspection exemption mark. This refers to a mandatory inspection required for every vehicle that has obtained an official license plate and registration certificate.
4
5
Share

How to Determine if a Motorcycle is Not Generating Electricity?

Locate the fuse. For the 125 model, the fuse is located at the rear of the engine and needs to be opened with a screwdriver. Another type of fuse is located under the seat and can be seen when refueling. After locating the above two types of fuses, start the motorcycle and remove the fuse. Turn on the headlight switch. If the headlight turns on, it indicates that the charging system is functioning normally. If the headlight does not turn on, there is a fault in the motorcycle's power generation system. If the power generation system is not functioning properly, check the voltage regulator. Replacing the voltage regulator can resolve 70% of power generation issues.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.