What grade of gasoline does the Honda Fit use?

2 Answers
VanManuel
07/25/25 3:10pm
The manufacturer recommends using 92-octane or higher unleaded gasoline that meets national standards for the Fit. Below are the steps to open the fuel tank cap of the Honda Fit: 1. There is a fuel tank cap release lever located below the left side of the driver's seat. 2. To open the fuel tank cap, simply pull the release lever. 3. You can then open the fuel tank cap to refuel. Precautions to take when refueling are as follows: 1. Turn off the engine before refueling. When the engine is running, the fuel pump is also active, and not turning it off can pose significant risks. 2. The use of mobile phones is prohibited at gas stations. Making phone calls generates electromagnetic waves, which can cause sparks when they come into contact with gasoline vapors in the air. 3. During autumn when the weather is dry, avoid wearing clothes that easily generate static electricity. Do not touch the metal nozzle of the fuel pump while refueling to prevent static electricity from causing a fire.
Was this review help?
9
5
Share
LaSilas
08/11/25 9:21pm
I've been driving a Honda Fit for three years as my daily commuter, always using 87-octane unleaded gasoline. This choice is very cost-effective, saving me dozens of yuan each time I refuel compared to higher-grade fuel, which adds up to over a hundred yuan per month. The Fit's engine is designed for regular gasoline with its moderate compression ratio, making 87-octane a perfect match that won't cause knocking or performance issues. My car averages 6 liters per 100 kilometers, running smoothly and efficiently. Don't blindly believe in higher-octane fuel—I once tried 95-octane and noticed slightly faster acceleration, but the difference wasn't worth the extra cost. Always fill up at reputable gas stations to avoid engine damage from substandard fuel. During regular maintenance, check the fuel filter and injectors to keep the car in good condition. This approach saves money, ensures peace of mind, and extends the vehicle's lifespan. I recommend new owners consult their manual to confirm these practices and develop good habits to avoid unnecessary expenses.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What is the wheelbase of the BYD Song MAX?

The wheelbase of the BYD Song MAX is 2785mm, with length, width, and height measuring 4680mm, 1810mm, and 1680mm respectively. Below is the relevant information: 1. The BYD Song MAX is equipped with a 1.5-liter turbocharged engine across all variants. This model is available in both six-seater and seven-seater versions. The 1.5-liter turbocharged engine of the BYD Song MAX delivers a maximum power of 118kW and a maximum torque of 245N·m, and it features an aluminum alloy cylinder head and block. 2. The front suspension of the BYD Song MAX uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. Most MPVs use a torsion beam for the rear suspension due to its compact size and minimal space occupation. The use of a torsion beam rear suspension helps to maximize rear passenger space and trunk capacity, which are crucial factors for MPVs.
10
1
Share

What is the ground clearance of the Honda Vezel?

The ground clearance of the Honda Vezel is 170mm. Below are the relevant details: 1. The Vezel adopts a front MacPherson suspension structure, which is a mainstream suspension arrangement. Its advantages include compact space utilization, facilitating engine compartment layout, with the lower control arm made of steel. The front suspension subframe is a full-frame steel subframe, equipped with an engine underguard and an engine compartment heat insulation aluminum plate. The lower control arm is connected to the subframe via rubber bushings. 2. The rear suspension of the Vezel is a torsion beam non-independent suspension, the most common suspension type in this class, with advantages of simple structure and good reliability. 3. The ground clearance of sedans should generally be between 130mm~200mm, ensuring that minor bumps won't scrape the undercarriage. However, overall, sedan ground clearance is relatively low, typically below 150mm.
17
2
Share

Why Do Buick Cars Consume So Much Fuel?

Buick cars consume fuel quickly for the following reasons: 1. Small displacement with heavy body weight. 2. To cater to domestic family needs, most models use 1.6L engines while the vehicle itself is heavy, forcing the engine to operate at high RPMs. 3. Outdated engine and transmission technology, with some models still using 4-speed transmissions. Below are methods to reduce fuel consumption: 1. Essential summer AC system inspection: AC malfunctions can significantly increase fuel usage. If cooling efficiency is poor, many drivers increase fan speed and lower temperature settings for comfort. Since AC directly impacts summer fuel consumption, timely maintenance is crucial. 2. Frequent hard braking is a primary cause of high fuel consumption: Data from hybrid vehicles with kinetic energy storage systems shows 40% lower fuel consumption compared to conventional counterparts, demonstrating clear correlation between urban driving conditions and frequent braking. 4. Avoid aggressive AC usage in small-displacement vehicles: For sun-exposed vehicles, don't activate AC immediately. Instead, open windows and set fans to high speed to vent hot air before gradually introducing AC cooling.
5
0
Share

Where is the turn signal relay of Zhonghua V3 located?

The turn signal relay is generally located under the dashboard, above the brake pedal. Remove the steering column interior trim panel and turn on the turn signal to locate the relay. Below is relevant information about the relay: 1. The turn signal is controlled by the relay. The frequency of the relay is controlled by the current, which is determined by the bulb's current. The higher the bulb's power, the higher the frequency. However, the frequency of a car's turn signal is usually stable within a certain range—neither too fast nor too slow. If the turn signal frequency appears unusually high, it is likely that one of the front or rear bulbs is damaged or the filaments of both bulbs are slightly oxidized. Oxidation causes the filament to thin, increasing resistance and reducing current, which in turn increases the frequency. 2. A relay, also known as an electrical instrument, is an electronic control device with both a control system and a controlled system. It is commonly used in automatic control circuits and essentially functions as an 'automatic switch' that uses a smaller current to control a larger one. Therefore, it plays roles in automatic regulation, safety protection, and circuit switching within the circuit.
20
2
Share

Why does the Audi Q5 sometimes fail to start?

Audi Q5 fails to start for the following reasons: Battery depletion: If the battery is depleted, the car may fail to start. There are many reasons for car battery depletion, such as lack of water in the battery, battery failure, or prolonged use of the air conditioning. Ignition system failure: The function of the car's ignition system is to provide high voltage to the spark plugs at regular intervals to ensure the normal operation of the car. If the car fails to start and the battery is ruled out as the cause, then the car's ignition system may be faulty. Poor connection of low-voltage circuit wires or leakage of high-voltage wires can cause the car's ignition system to fail, thereby affecting the car and making it difficult to start. Low temperature: In cold winter weather, cars often fail to start. This is because in low-temperature environments, the viscosity and speed of the car's engine oil decrease, leading to a reduction in the ignition energy of the battery and a decrease in molecular activity. As a result, flammable gases cannot form, making it difficult to start the car.
17
3
Share

Should the Dongfeng Honda CRV use 92 or 95 gasoline?

The Dongfeng Honda CRV is suitable for 92 octane and above unleaded gasoline. Here is some relevant information about the Dongfeng Honda CRV: 1. The Dongfeng Honda CRV is equipped with two displacement engines, 2.0 and 2.4. The 2.0L double overhead camshaft i-VTEC engine has a maximum power of 110kW/6500rpm and a maximum torque of 190N·m/4000rpm. 2. Low-compression ratio engines are generally installed in low-end vehicles, and most of them use 92 octane gasoline. If 95 or 98 octane gasoline is used, the higher the octane rating, the better the stability, making it less likely for the engine to experience abnormal operation due to knocking. 3. If a high-compression ratio engine uses low-octane gasoline, the consequences are more severe than the first scenario, and the vehicle is prone to knocking, engine shaking, and other issues in a short period. Naturally aspirated engines, unlike turbocharged engines, do not require higher-octane gasoline, but this does not mean that 95 octane gasoline cannot be used. Higher-octane gasoline can make the engine more stable and slightly improve performance.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.