···
Log in / Register

What grade of gasoline does the Honda Elysion use?

3 Answers
AdalynnLynn
09/03/2025, 04:38 AM

Honda Elysion uses 92-grade gasoline. The method to open the fuel tank cap of the Honda Elysion is as follows: 1. There is a fuel tank cap release switch located at the lower left side of the driver's position; 2. To open the fuel tank cap, simply pull the switch; 3. The fuel tank cap can then be opened for refueling. After refueling, ensure the fuel tank cap is tightly closed to prevent fuel evaporation or, in severe cases, accidents. The Honda Elysion is a mid-to-high-end MPV launched by Dongfeng Honda. The overseas version of the Honda Elysion is equipped with a 2.4-liter engine, paired with a 5-speed automatic transmission, and offers both two-wheel drive and four-wheel drive versions.

Was this review help?
4
3
Share
VonGenesis
09/15/2025, 11:08 PM

I previously drove a Honda Elysion for some time. The manual clearly states to use 92 octane unleaded gasoline, not below 90 octane, otherwise the engine may experience knocking or noise. This is related to the engine design of the car. The Elysion's engine has a relatively low compression ratio, so 92 octane is sufficient. If you use 95 octane gasoline, it's also acceptable, but there's no need to waste money as the performance difference is minimal. The key is to avoid using the wrong fuel, such as mixing fuels or using lower octane ratings, which can damage spark plugs or increase fuel consumption over time. When refueling, I make it a habit to check the octane rating at the gas station and also inspect the fuel system during maintenance, which saves money and ensures safety. In short, following the manual is always the right approach, and the car runs very smoothly.

Was this review help?
10
5
Share
Expand All
DiPaislee
10/29/2025, 11:42 PM

I've worked on many Honda Elysions, and I recommend using 92 octane gasoline, which is suitable for its naturally aspirated engine. If you use fuel below 90 octane, it may cause pre-ignition and damage the engine; higher octane like 98 is unnecessary and a waste of money. You can find the recommendation by checking the fuel cap or the owner's manual. Also, pay attention to fuel quality, as poor-quality gasoline can cause carbon buildup and affect engine lifespan—it's best to use reputable gas stations. Regular maintenance of the fuel filter can also prevent issues. If you accidentally use the wrong fuel, clean it promptly to avoid compromising driving safety.

Was this review help?
3
5
Share
Expand All
More Forum Discussions

What are the reasons for the diesel engine's inability to increase speed?

Diesel engine speed cannot be increased for the following reasons: whether the load is too heavy. If gasoline is mixed into the diesel, the speed also cannot be increased. Additional information: 1. Diesel engine speed: Diesel engine speeds are generally not high, mostly not exceeding 4000 RPM, commonly below 3000 RPM, with the economical speed usually around 1500 RPM. 2. Diesel engine structure: The structure is generally designed for low speeds with piston strokes greater than the cylinder diameter. Increasing the speed is actually quite simple. Since diesel engine control is 'quality' control without a throttle, the amount of air entering the engine is basically fixed. Just inject more fuel to increase the engine speed. However, if the speed is too high, the diesel in the cylinder does not have enough time to fully atomize and mix with the air, forming an extremely uneven combustible mixture. This leads to uneven distribution of flame centers during combustion, causing the diesel engine to operate roughly.
7
0
Share

Can the outer shell of a motor vehicle driver's license be replaced?

Driver's licenses can have their outer shells replaced. The essential parts of a driver's license are the main card and the supplementary card. The choice of how to store them is flexible; even without an outer shell, it doesn't matter. License Holder: The outer shell of a motor vehicle driver's license is simply the protective case for the license. The holder only serves a protective function, and drivers can replace the outer shell of their driver's license on their own. Main Page: The front of the main page contains the endorsed core information, while the back features the motor vehicle photo, both laminated in a plastic sleeve. The main card records unchangeable information such as the driver's name, address, license number, permitted vehicle types, and initial issuance date. It is uniformly produced by the traffic management authorities and cannot be altered. Supplementary Page: The supplementary page is also an endorsed core document. It records the driver's license file number and provides reminder information, such as the probationary period, next annual review, and renewal date. It is uniformly issued by the traffic management authorities and cannot be modified.
1
3
Share

Does Honda SUV have seven-seater models?

Honda SUVs do not have seven-seater models. All SUVs under Honda are five-seaters, with the largest being the Avancier. The Avancier and UR-V are sister models, sharing the same engine and transmission, and their exterior and interior designs are almost identical. The Avancier is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine has a maximum power of 142 kW, a maximum torque of 243 Nm, a maximum power speed of 5600 rpm, and a maximum torque speed ranging from 2000 to 5000 rpm. It features VTEC technology and direct fuel injection, with an aluminum alloy cylinder head and block. The 2.0-liter turbocharged engine has a maximum power of 200 kW, a maximum torque of 370 Nm, a maximum power speed of 6500 rpm, and a maximum torque speed ranging from 2250 to 4500 rpm. This engine also features VTEC technology and direct fuel injection, with an aluminum alloy cylinder head and block.
11
2
Share

What Causes the Emergency Brake Assist System to Malfunction?

Reasons for brake assist system failure include insufficient brake fluid, air in the brake system, excessive free travel of the brake pedal or excessive brake clearance, poor contact of the brake shoe friction plate, severe wear or oil contamination, and clogged brake system pipelines. The following are specific introductions about the brake system: 1. The brake system refers to a series of specialized devices that can forcibly reduce the speed of a car. 2. The brake system is mainly composed of four parts: the energy supply device, control device, transmission device, and brake. 3. The main functions of the brake system are to decelerate or even stop a moving car, maintain a stable speed for a car going downhill, and keep a parked car stationary. Due to different vehicle designs and braking methods, brake system failures can be caused by various reasons. 4. Symptoms of brake failure include: brake failure; abnormal noise during braking; effective distance becoming longer or shorter; braking deviation or tail flick; intermittent braking; changes in braking stroke, such as becoming longer or harder; vibration during braking; and other abnormal phenomena.
2
2
Share

What are the symptoms of a faulty car PCV valve?

PCV valve damage can cause phenomena such as white smoke emitting from the exhaust pipe, accelerated wear, and unstable idle. In severe cases, it can lead to engine idle shaking, weak acceleration, excessive oil consumption, difficulty starting the car, and ultimately shortening the engine's lifespan. Here is some extended information: 1. PCV valve: The PCV valve is a metering control valve installed between the crankcase ventilation system and the intake system. The PCV is controlled by vacuum, regulating the flow of oil fumes from the crankcase ventilation system into the intake system. The flow rate is higher when the engine is running at high speed compared to low speed. Additionally, the PCV valve should cut off ventilation to prevent crankcase explosion when engine backfire occurs. 2. Judgment method: With the engine idling, clamp the pipeline between the PCV valve and the vacuum source. If the engine speed drops by 50r/min or more, it is normal. Otherwise, check if the PCV valve and pipeline are blocked. Also, pull out the PCV valve and feel if there is strong vacuum suction at the intake port, which indicates normal operation.
16
2
Share

Which direction to turn the steering wheel for a left turn?

To turn left, the steering wheel should be turned to the left. Use your left hand to apply force and turn the steering wheel to the left, while your right hand assists in pushing it leftward. After completing the turn, use your right hand to apply force and turn the steering wheel to the right to align the vehicle's direction straight ahead. Below is some related information: 1. Introduction: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. It mainly consists of a frame, foam, and corresponding installation clips or screw holes for the driver's airbag (DAB). 2. Function: The steering wheel is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger-diameter steering wheel reduces the amount of force the driver needs to apply. The steering intermediate shaft serves as a connecting component between the steering gear and the steering shaft, facilitating the standardization of the steering gear, compensating for errors during manufacturing and installation, and ensuring a more rational installation of the steering gear and steering wheel in the vehicle.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.