What grade of gasoline does the Golf 1.2T use?

What is the correct way to shift from third gear to second gear?

The correct method for shifting from third gear to second gear is as follows: When the speed reaches 20 km/h, press the clutch, release the accelerator, and shift to third gear. Below is relevant information about gear shifting: 1. Gears: There are gears of different speeds on the tire's rotating shaft. When the engine speed remains unchanged, engaging gears of different sizes (different gear positions) with the engine results in the larger gear obtaining a lower circumferential speed than the smaller gear. 2. Torque: According to the knowledge of torque, at low speeds, the gear is larger, and the engine drives a large radius with a small radius, allowing the car to obtain greater driving force. At high speeds, the engine drives a small radius, resulting in a fast circumferential speed, meaning the car moves quickly but with less torque, i.e., less driving force. Therefore, shifting gears in a car essentially changes the transmission gears.

20

5

Share

What is the optimal tire pressure for family sedans?

The optimal tire pressure for family sedans is maintained between 2.3 to 2.5 bar, which is considered the standard tire pressure value. Tire pressure refers to the air pressure inside the tires, and the level of tire pressure directly affects the vehicle's performance and power output. Whether the tire pressure is higher or lower than the standard value, it will impact the comfort of the vehicle and the lifespan of the tires. The recommended tire pressure ranges are: standard tires at 2.4 to 2.5 bar; reinforced tires at 2.8 to 2.9 bar; the maximum pressure should not exceed 3.5 bar. Tire pressure is influenced by factors such as season, load capacity, measurement environment, road conditions, and tire condition.

4

1

Share

What are the differences between the 5-seat and 7-seat Toyota Highlander?

Toyota Highlander 5-seat and 7-seat differ in the following aspects: 1. Number of seats: The 5-seat version has 5 seats, while the 7-seat version has 7 seats. 2. Curb weight: The 5-seat model weighs 1910kg, whereas the 7-seat model weighs 1935kg. The Highlander features a MacPherson strut front suspension and an E-type multi-link rear independent suspension. It is equipped with a 2.0T turbocharged engine delivering a maximum horsepower of 220PS, peak torque of 350Nm, and maximum power of 162kW, paired with a 6-speed automatic transmission.

17

0

Share

What to Do When a New Energy Vehicle Charger Malfunctions?

New energy vehicle charger malfunction can be resolved by promptly replacing the charger with a new one. It is advisable to discontinue using the faulty charger to avoid potential damage to the vehicle's battery. New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as their power source or combine conventional vehicle fuels with new types of onboard power devices. These vehicles are produced with new technologies and structures based on advanced power control and driving methods. New energy vehicles consist of three main systems: the power system, the electric drive system, and the auxiliary system. The power system includes the power source, energy management system, and charger; the electric drive system comprises the electronic controller, motor, mechanical transmission device, power converter, and wheels; the auxiliary system includes the auxiliary power source, power steering system, air conditioner, lighting and defrosting devices, navigation system, radio, etc.

16

0

Share

How to Determine if Car Tires Are Mounted Backwards?

To determine if car tires are mounted backwards: There is a numerical marking on the side of the tire that can indicate the correct orientation. If the side with the number is facing the opposite side of the wheel hub, it means the tire is mounted backwards. The functions of tires are: 1. Transmit driving force, braking force, and steering force to operate the vehicle; 2. Support the vehicle load; 3. Reduce and absorb vibrations and impacts during driving, preventing severe vibrations from damaging car components. Tire maintenance methods include: 1. Regularly clean stones stuck in the tire treads; 2. Minimize exposure to direct sunlight; 3. Check tire pressure promptly; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Be mindful of driving habits.

6

2

Share

Is the Civic compliant with China's National VI emission standards?

The Civic has some models that comply with China's National VI emission standards, such as the 2019 Civic Sport Edition. This model has an exterior length of 4658mm, width of 1800mm, height of 1416mm, a wheelbase of 2700mm, and a minimum ground clearance of 105mm. It features a front MacPherson strut independent suspension and a rear double-wishbone independent suspension, utilizing front and rear independent suspension systems to enhance driving stability and ride comfort. The Civic's safety configurations include anti-lock braking system (ABS), electronic stability control (ESC), brake assist, electronic brakeforce distribution (EBD), traction control, head airbags, and rear center three-point seat belts. The interior is equipped with a central console LCD screen, rear independent air conditioning, and a keyless start system.

19

1

Share

What grade of gasoline does the Golf 1.2T use?

What is the correct way to shift from third gear to second gear?

What is the optimal tire pressure for family sedans?

What are the differences between the 5-seat and 7-seat Toyota Highlander?

What to Do When a New Energy Vehicle Charger Malfunctions?

How to Determine if Car Tires Are Mounted Backwards?

Is the Civic compliant with China's National VI emission standards?

What is the engine of the Honda Spirior?

How many cylinders does the Geely Xingyue have?

What does Audi e-tron mean?

To what extent should car rearview mirrors be adjusted?