What grade of gasoline does the Fit use?

1 Answers
LeSadie
07/29/25 4:21pm
The Fit uses 92-octane gasoline, where the octane rating represents the ratio of the gasoline's anti-knock properties to those of standard gasoline. The Fit is a compact car under the GAC Honda brand. Taking the 2021 Fit as an example, its body dimensions are: length 4109mm, width 1694mm, height 1537mm, with a wheelbase of 2530mm and a fuel tank capacity of 40 liters. The 2021 Fit is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96kW and a maximum torque of 155Nm, paired with a CVT continuously variable transmission. It features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
Was this review help?
3
5
Share
More Forum Discussions

How to adjust the height of the Chevrolet Cruze clutch?

The method to adjust the height of the Chevrolet Cruze clutch is as follows: 1. Locate the clutch master cylinder behind the clutch pedal and remove it; 2. The adjustment part is the push-pull rod, which has a notch. Insert a small wrench into the notch to rotate the rod; 3. Use another wrench to loosen the positioning nut on the rod. After loosening the nut, adjust it to the end of the thread, then rotate the rod; 4. During adjustment, turn the rod by hand to gradually shorten it, then tighten the positioning nut. The dimensions of the Chevrolet Cruze are 4666mm in length, 1807mm in width, 1460mm in height, with a wheelbase of 2700mm.
19
0
Share

What Happens If You Stuff a Steel Wool Ball into a Car's Exhaust Pipe?

Stuffing a steel wool ball into a car's exhaust pipe can prevent the engine from starting normally. The exhaust pipe is designed to expel the waste gases produced after engine combustion. Therefore, blocking the exhaust pipe will affect its smooth operation and interfere with the engine's normal functioning. A car's exhaust pipe consists of three sections: the front pipe, the midpipe, and the tailpipe. The front pipe, also known as the exhaust manifold, is visible when you open the engine hood. The exhaust manifold is equipped with a catalytic converter, which reduces the levels of pollutants in the exhaust gases. The catalytic converter is a crucial component for the vehicle. The midpipe is the longer section located under the car's chassis, while the tailpipe is the part near the rear bumper.
7
5
Share

What is the fuel consumption per 100 kilometers for the Lavida XR?

The Lavida XR has a total of 8 models, with an official fuel consumption of 5.1-6.9L per 100 kilometers. The fuel consumption for different models is as follows: Lavida XR-2017-1.6L-Automatic Comfort Edition and Fashion Edition, equipped with a 110 horsepower engine, have an NEDC fuel consumption of 6.9L per 100 kilometers. Lavida XR-2017-1.6L-Manual Comfort Edition and Fashion Edition, equipped with a 110 horsepower engine, have an NEDC fuel consumption of 6.2L per 100 kilometers. Lavida XR-2017-180TSI-DSG Comfort Edition, equipped with a 110 horsepower engine, has an NEDC fuel consumption of 5.1L per 100 kilometers. Lavida XR-2017-230TSI-DSG Luxury Edition and Comfort Edition, equipped with a 131 horsepower engine, have an NEDC fuel consumption of 5.3L per 100 kilometers. Lavida XR-2017-230TSI-Manual Comfort Edition, equipped with a 131 horsepower engine, has an NEDC fuel consumption of 5.7L per 100 kilometers. The fuel tank capacity for all Lavida XR models is the same, at 55L. The distance that can be covered with a full tank of fuel is as follows: 2017-1.6L-Automatic Comfort Edition and Fashion Edition: 55/6.9*100=797km. 2017-1.6L-Manual Comfort Edition and Fashion Edition: 55/6.2*100=887km. 2017-180TSI-DSG Comfort Edition: 55/5.1*100=1078km. 2017-230TSI-DSG Luxury Edition and Comfort Edition: 55/5.3*100=1037km. 2017-230TSI-Manual Comfort Edition: 55/5.7*100=964km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, will increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
4
0
Share

Is it acceptable to have a license plate ending with 0?

Having a license plate ending with 0 is acceptable. The last digit of a vehicle's license plate is determined by the local vehicle numbering system and can be any digit from 0 to 9 or any letter from A to Z, which makes no difference in terms of vehicle usage. However, if there are local traffic restriction policies based on plate numbers, 0 would be considered an even number. The Chinese character at the beginning of a license plate represents the province or municipality directly under the central government, while the letter following the Chinese character denotes the city or district. By looking at the letters or numbers at the front of the license plate, one can identify which city the vehicle belongs to. A license plate, also known as a vehicle registration plate, is a metal or plastic plate attached to both the front and rear of a vehicle, displaying the vehicle's registration number, registration region, and other basic information.
13
0
Share

What Causes Abnormal Noise in Car Steering?

The causes of abnormal noise in car steering are: 1. Aging of the steering tie rod ball joint, which requires replacement of the steering tie rod ball joint, and a four-wheel alignment is necessary after replacement; 2. Leakage of the steering gear dust cover, which can be resolved by replacing the dust cover and reapplying grease; 3. Dirty power steering fluid, as excessively dirty fluid increases the pressure in the power steering system, leading to abnormal noise from the power steering pump. The steering system mainly consists of the steering column, steering wheel, steering shaft, and other components. The steering system is the mechanism used to change the direction of the vehicle, functioning to control the driving direction according to the driver's intention. Like the braking system, the steering system is crucial for vehicle safety.
5
0
Share

Where are the fog lights located on a sedan?

Sedan fog lights are generally positioned below the vehicle's headlights. Fog lights serve to increase operational distance and enhance visibility for both the driver and other road participants, allowing approaching vehicles and pedestrians to detect each other from a greater distance. Fog lights are categorized into front fog lights and rear fog lights. Front fog lights typically emit a bright yellow light, while rear fog lights are red. The symbols for rear fog lights differ slightly from front fog lights – the front fog light symbol features downward light beams, whereas the rear fog light symbol displays parallel beams, usually located on the dashboard inside the vehicle. Due to their high brightness and strong penetration, fog lights do not produce diffuse reflection in foggy conditions. Proper usage can effectively prevent accidents. During foggy weather, both front and rear fog lights are commonly used simultaneously.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.