What grade of gasoline does the Camry 2.0 use?

1 Answers
VioletMarie
07/24/25 7:29am
The Camry 2.0 uses 92-octane gasoline. Gasoline is a volatile and flammable hydrocarbon mixture liquid distilled or cracked from petroleum. At room temperature, it appears as a colorless to light yellow, easily flowing liquid that is difficult to dissolve in water. The Camry has a body size of 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 131kW and a maximum torque of 210Nm, paired with a continuously variable transmission (CVT). The front suspension is a MacPherson independent suspension, and the rear suspension is an E-type multi-link independent suspension.
Was this review help?
18
3
Share
More Forum Discussions

Can You Release the Clutch in Neutral Gear?

You can release the clutch in neutral gear. When the transmission is in neutral, releasing the clutch will not cause the car to stall. Neutral gear typically refers to the state where the vehicle's gearshift lever is not engaged in any forward or reverse gear, completely disconnecting the transmission from the drive wheels. For manual transmissions, neutral is the middle position, while for automatic transmissions, it is marked as 'N'. Additional relevant information is as follows: Impact of Automatic Transmission on Downhill Driving: Never coast in neutral when driving downhill with an automatic transmission. Notes on coasting downhill in neutral mention that coasting in neutral is equivalent to idling, where the fuel injector continues to spray fuel, leading to carbon buildup and being environmentally unfriendly. Dangers of Automatic Transmission on Downhill: Coasting in neutral downhill is also highly dangerous. Notes on coasting downhill in neutral state that if the driver encounters an emergency situation while the transmission is in neutral, the drivetrain is not connected to the engine, and the vehicle lacks engine braking assistance. This not only reduces braking effectiveness but also causes the vehicle to lose stability and slide sideways.
14
5
Share

What Types of Transmissions is ATF Transmission Fluid Suitable For?

ATF transmission fluid is automatic transmission fluid, and there are many types of ATF transmission fluids with different friction coefficients. Currently, the widely used ATF transmission fluid models include DEXRON, DEXRON-II, and DEXRON-III. The DEXRON standard is classified according to the standards of General Motors (GM) in the United States and is the most widely applied standard. Relevant information about transmissions is as follows: Introduction: A device that changes the speed ratio and direction of motion. It is used to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Function: During vehicle operation, to adapt to different working conditions, the driving force and speed of the vehicle need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the installation of a transmission.
13
4
Share

Can National VI Diesel Vehicles Use Regular Diesel?

National VI diesel vehicles can use regular diesel. The emissions of diesel vehicles are primarily reduced by the urea tank, with diesel quality having almost no impact. The National VI engine requires a urea solution concentration standard of 32.5%. The freezing point of urea solution at this concentration is -11°C. Below is an introduction to urea solution for vehicles: Origin: Urea solution for vehicles was first used in Europe, known as Adblue, in North America as DEF (Diesel Exhaust Fluid), and domestically as urea solution for vehicles or "vehicle denitration agent." However, it is now generally referred to as "urea solution for vehicles" in China. Function: Urea solution for vehicles is crucial for reducing pollutant emissions from diesel vehicles. It is a urea-based chemical reactant, composed of high-purity urea and deionized water, forming a 32.5% concentration solution. Applying urea solution for vehicles in the SCR system is key to achieving National IV and higher emission standards for engine exhaust.
3
0
Share

What is the vorei motorcycle?

vorei belongs to Luoyang Northern EK Chor Motorcycle Co., Ltd. The following is an introduction to motorcycle types: Sports motorcycles: Sports motorcycles are also called racing motorcycles. Their design philosophy is to provide people with leisure and vacation, serving as an entertaining means of transportation. Road motorcycles: Motorcycles mainly used on paved roads are called road motorcycles. Road motorcycles can be divided into three categories: super sports motorcycles, touring motorcycles, and American-style motorcycles. Since these motorcycles primarily operate on smooth paved roads, they are also known as urban motorcycles. Super motorcycles: General motorcycles place great emphasis on riding comfort and ease of operation. Super sports motorcycles, however, prioritize high-speed performance. Chopper motorcycles: They feature higher handlebars, longer front suspension, and low seats. Touring motorcycles: Favored by Europeans and Americans for long-distance travel, these motorcycles emphasize comfort for extended journeys. They typically come equipped with rider amenities, such as ample storage space.
19
5
Share

What does 'step one lift two' mean for motorcycles?

Motorcycle 'step one lift two' refers to lightly stepping backward to indicate neutral gear. Below is an extended introduction: Engine warm-up: After starting the motorcycle engine, it needs to warm up for 3-5 minutes before moving. Engine warm-up is a task that cannot be overlooked, especially when the surrounding temperature is low, making it even more important. However, revving the throttle to speed up warm-up is not advisable. An engine that hasn't warmed up sufficiently will experience increased wear on components such as the cylinder, piston rings, and rocker arms during operation. Motorcycle gear shifting: When shifting gears, the user pulls the clutch lever, disengaging the clutch, putting the vehicle in a state where speed cannot be controlled by the throttle. The tires also lose driving friction with the ground, causing the motorcycle to coast on inertia.
13
0
Share

What are the three certificates required for a motorcycle?

Motorcycle three certificates refer to the vehicle license, driver's license, and compulsory insurance label. Below is an extended introduction: Motorcycle introduction: A motorcycle is a two-wheeled or three-wheeled vehicle powered by a gasoline engine and steered by handlebars to control the front wheel. It is lightweight, flexible, fast, and widely used for patrols, passenger and cargo transportation, as well as a sports equipment. Broadly speaking, motorcycles are divided into street bikes and road racing motorcycles. E license introduction: The E license (ordinary two-wheeled motorcycle) is for two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h, and qualifies the holder to drive F license vehicles.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.