What grade of gasoline does the Borgward BX5 use?

Do You Need to Supervise When a 4S Shop Repairs an Accident Vehicle?

You do not need to supervise when a 4S shop repairs an accident vehicle. Accident Vehicle: An accident vehicle is defined as one that has suffered non-natural wear and tear due to an accident, resulting in reduced mechanical performance, vehicle damage, and economic value. Flood-damaged cars, fire-damaged cars, and traffic accident vehicles are all considered accident vehicles. To identify an accident vehicle, inspect the vehicle's exterior, lighting, bumper sections, interior parts, and chassis system. Vehicle Replacement: The vehicle will be restored to its original condition, but the replaced parts will show noticeable differences. First, there will be a difference in the age of the parts, and since the vehicle's parts have been disassembled, there will be marks on screws and fasteners. When purchasing a used car, be sure to thoroughly inspect the vehicle's condition to avoid buying an accident vehicle.

14

4

Share

How to Explain Wheel Offset?

Wheel offset refers to the distance from the mounting surface (the surface that contacts the hub) to the centerline of the wheel, which can be positive or negative. The impact of wheel offset on safety: Incorrect wheel offset can lead to uneven tire wear, rubbing against the fender, interference with steering, and serious safety issues. Zero offset means the two surfaces coincide, positive offset means the mounting surface is towards the outside, and negative offset means the mounting surface is towards the inside (closer to the braking system). In other words, the greater the positive offset, the more the wheel is tucked in; the greater the negative offset, the more the wheel protrudes outward from the vehicle body. Wheels can be divided into two main categories based on material: steel wheels and alloy wheels. Steel wheels: Advantages include simple manufacturing process, relatively low cost, and strong resistance to metal fatigue. Disadvantages include heavy weight, high inertial resistance, and poor heat dissipation. Alloy wheels: Advantages include lightweight, high manufacturing precision, high strength, low inertial resistance, excellent heat dissipation, and good visual appeal. Disadvantages include complex manufacturing process and high cost.

4

0

Share

Why is the speed limit on the Hubao Expressway set at 80?

The speed limit on the Hubao Expressway is set at 80 to better prevent and reduce the occurrence of road traffic accidents. Expressway speed limits: Compared to driving on expressways, some people prefer alternating between expressways and provincial or county roads during long-distance trips, even if it takes longer. The monotonous scenery on expressways can easily lead to distraction, and prolonged driving increases the risk of accidents. However, many drivers still favor expressways for their convenience and speed, though frequent users often have numerous questions about them. Types of speed limits: Many people assume that expressways should have a speed limit of 120, but there are expressways with an 80 speed limit throughout. Generally, expressways designed for 80 km/h are often located in mountainous areas, high-altitude regions, or remote areas with challenging terrain. Even though the roads are well-constructed, immediate rescue may not be possible in case of emergencies. Therefore, "better safe than sorry"—lowering the speed limit also reduces the probability of accidents at the source.

13

2

Share

Why does the gap become larger after removing the door panel once?

After removing the door panel once, the gap may become larger due to aging door seals or improper repair and alignment of the door gap. Here are the specific reasons: Aging door seals: If the door gap is large, replacing the door seal strip may solve the issue. A large gap could be caused by aging seals, which fail to provide proper sealing and cushioning. The quality of a door is mainly reflected in its anti-collision performance, sealing performance, and ease of opening and closing. Anti-collision performance is particularly important because, during a side impact, the buffer distance is very short, making it easy for passengers inside the vehicle to be injured. Improper repair and alignment of the door gap: If the repair shop did not fix the issue properly and the door frame remains deformed, the only solution is to have the repair shop realign it again.

8

1

Share

What engine does the Haojue UHR150 use?

Haojue UHR150 engine is domestically produced. The Haojue UHR150 uses a single-cylinder water-cooled engine. Its dimensions are 1950mm x 755mm x 1120mm, with a wheelbase of 1315mm, a curb weight of 140kg, a minimum ground clearance of 120mm, and a seat height of 760mm. The fuel tank capacity is 8L, equipped with front 110/80-14 and rear 130/70-14 tires. Power parameters: actual displacement of 149ml, compression ratio of 10.6:1, maximum power of 10.6KW, maximum torque of 14.2N.m released at 6500 rpm. The engine is a critical component of a motorcycle. Proper maintenance using scientific methods can preserve engine performance and extend the vehicle's lifespan. Air filter element: Polyurethane filter element: Clean every 3000Km, no replacement needed; Paper filter element: Clean every 4000Km, replace every 12000Km. If the filter element gets clogged with dust, the intake resistance will increase, leading to reduced engine output power and increased fuel consumption. Exhaust pipe bolts and muffler mounting nuts: Tighten after 1000km and 8000km of riding. Oil change, as specified in the manual: The first 1000km is the break-in period. During break-in, do not exceed half throttle. After 1000km, the first oil change is required. Post break-in, change the oil every 2000km or every 4 months.

7

4

Share

Is It Normal for Beginners to Scratch Their Cars?

It is normal for beginners to scratch their cars. Here are some common-sense tips for novice drivers: Pay attention to speed: As long as you're not on the highway, it's advisable for beginners to maintain a steady speed of around 60 km/h, which helps with control. Check the rearview mirrors frequently: Rearview mirrors allow you to observe the road conditions on both sides and behind the vehicle, especially when changing lanes, reversing, or overtaking. They play a crucial role. Maintain a safe distance: Novice drivers tend to follow other cars too closely. If the car in front brakes or cuts in, beginners often react by slamming on the brakes immediately. Sometimes, excessive nervousness can lead to oversteering, causing accidents. Therefore, keeping a safe distance from the car ahead is essential. If someone cuts in, slow down appropriately to yield. Use lights correctly: Avoid turning on hazard lights randomly. Turn on the side marker lights at dusk, and fog lights should only be used in foggy conditions with poor visibility.

1

4

Share

What grade of gasoline does the Borgward BX5 use?

Do You Need to Supervise When a 4S Shop Repairs an Accident Vehicle?

How to Explain Wheel Offset?

Why is the speed limit on the Hubao Expressway set at 80?

Why does the gap become larger after removing the door panel once?

What engine does the Haojue UHR150 use?

Is It Normal for Beginners to Scratch Their Cars?

Can a fire extinguisher be placed horizontally in a car?

What car is Pi You's blue convertible?

What Are the Consequences of Washing an Engine with a Water Gun?

How many kilograms is 18 liters of oil equivalent to?