What grade of fuel should the Volkswagen Teramont use?

2 Answers
ManuelRose
07/25/25 12:04pm
The Volkswagen Teramont requires 95-octane fuel. The octane rating of gasoline represents its anti-knock performance. If the Teramont uses lower-octane fuel, pre-ignition may occur, leading to engine knocking. Knocking can cause severe impact on the engine's crankshaft-connecting rod mechanism and cylinder walls, and prolonged knocking can damage the engine. In terms of configuration, the Volkswagen Teramont is equipped with features such as adaptive cruise control, lane keeping assist, blind spot monitoring, collision warning, heated steering wheel, heated front seats, and a panoramic sunroof. The vehicle measures 5039mm in length, 1989mm in width, and 1773mm in height, with a wheelbase of 2980mm. It is powered by a 7-speed dual-clutch transmission and has a top speed of 200 kilometers per hour.
Was this review help?
20
3
Share
McAbigail
08/11/25 8:12pm
I always insist on using 95-octane gasoline for my Volkswagen Teramont, as it's the officially recommended fuel grade. After years of usage, the engine performs stably with ample power and has never encountered any issues. Once, I had to temporarily use 92-octane in an emergency, and the acceleration became sluggish with unusual noises, while fuel consumption actually increased. I quickly used it up and switched back to 95-octane, mixing it to return to normal performance. I recommend choosing branded gas stations for reliable quality to avoid impurities. Before long trips, check the fuel level and fill up with 95-octane for peace of mind. Don’t risk using lower-grade fuel—engine health is crucial and maintaining it isn’t troublesome.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

How Many Cylinders Does the BMW i8 Have?

BMW i8 uses a three-cylinder engine, featuring a combination of a 1.5-liter three-cylinder turbocharged engine and an electric motor. The BMW i8 is a plug-in hybrid system. More details about the BMW i8 are as follows: Exterior of the BMW i8: The new BMW i8 has removed the structural front windshield glass from the original concept car but retains the flying buttress-style rear design. Additionally, the position of the rear wheel arches on the car body is very close to the doors, and the fuel tank cap is placed on the wheel arches. In terms of door design, the production model abandons the concept car's panoramic gull-wing glass doors, opting instead for regular gull-wing doors that are slightly smaller in size compared to the concept car's glass doors. Performance of the BMW i8: The engine has a maximum horsepower of 231, a maximum power of 170 kW, and a maximum torque of 320 Nm, while the electric motor has a maximum horsepower of 143. The BMW i8 is equipped with all-wheel drive across the entire range, paired with a 6-speed automatic transmission, achieving a top speed of 250 km/h. The BMW i8 is a plug-in hybrid system.
10
0
Share

What is the chassis analysis of the BMW X3?

The front suspension uses BMW's common double-joint spring strut, while the rear suspension employs a multi-link independent suspension. Below are the detailed introductions of the relevant content: Introduction: The new BMW X3 features a front suspension with BMW's typical double-joint spring strut and a rear suspension with a multi-link independent suspension. The front suspension maintains the same structure as the previous generation but uses more robust materials. Although the rear suspension remains a five-link design like the previous generation, the design and layout of the control arms have been altered. Additionally, the new-generation X3 has a wheelbase extended by 54mm compared to the previous generation. Drive: BMW's new rear-wheel-drive/four-wheel-drive platform is called the CLAR platform. This platform allows the use of a hybrid of steel, aluminum, and carbon fiber materials for the body and was designed from the outset to accommodate plug-in hybrid and pure electric systems. The CLAR platform was first applied in the new-generation 7 Series and has since been widely adopted across BMW's lineup. Except for front-wheel-drive models like the X1, most of the new-generation BMW models utilize this platform.
18
0
Share

What are the functions of the Accord's buttons?

Accord function buttons are located in three areas: center console buttons, door buttons, and roof buttons. The following are the specific details of related functions: Electronic Stability Program (ESP) and Parking Radar/Camera: Effectively prevents loss of control such as side slipping and tail swinging. It is generally not recommended for drivers to manually turn it off. The center console screen displays the rearview camera, and the radar will sound an alarm when detecting nearby obstacles. Internal/External Air Circulation: Internal circulation refers to heating or cooling the air inside the car and then sending it back into the car, while external circulation allows outside air to enter the car. During traffic jams, in tunnels, or when the outside air quality does not meet standards, internal circulation should be prioritized. On highways, it is advisable to switch to external circulation periodically to ensure fresh air and prevent health issues caused by stale air.
11
5
Share

Does the Golf 8 Pro come with intelligent voice functionality?

The Golf 8 Pro is equipped with voice functionality. Here are the detailed introductions of the related features: Introduction: The Golf comes with a voice recognition control system. Golf owners can press the voice button on the steering wheel or directly activate it by voice command. It enables functions such as making phone calls, controlling volume, adjusting air conditioning, and querying routes. Auto-folding mirrors upon locking: Auto-folding mirrors upon locking means that the mirrors automatically fold when the driver locks the car. The Golf features auto-folding mirrors upon locking, which not only protects the mirror surfaces of the Golf but also reduces the parking space required, effectively avoiding scratches. Additionally, it prevents pedestrians from colliding with the mirrors, which could lead to injuries or damage to the mirrors.
6
2
Share

What is the actual fuel consumption of the Mazda6?

Mazda6's actual fuel consumption is around 8-10 liters. Below are methods to calculate the actual fuel consumption: Based on the onboard computer calculation: Generally, better cars are equipped with an onboard computer that displays instant fuel consumption and average fuel consumption. To calculate fuel consumption accurately, clear the data in the computer and read the average fuel consumption. Based on fuel consumption calculation: First, when refueling, fill up until the pump automatically stops (do not add more fuel) and record the current mileage. After driving for a period, refuel again until the pump automatically stops (do not add more fuel). Record the amount of fuel added and calculate the distance traveled since the last refill. Divide the fuel amount by the distance to get the fuel consumption.
18
2
Share

What is the real fuel consumption of the 1.4T Sagitar?

The real fuel consumption of the 1.4T Sagitar is 5.6L/100km. Here are the specific details: Configuration: The Sagitar is equipped with a rich array of features. The Sagitar mainly enhances its mid-to-low-end models like the 1.6L Comfort version, adding functions such as automatic headlights and automatic anti-glare rearview mirrors to improve the competitiveness of these models. Meanwhile, the 1.4T models also feature rear footwell ambient lighting, and the Luxury and Flagship versions come with a color instrument panel. The driver fatigue warning function is another highlight of the Sagitar. Interior: The Sagitar's interior adopts a family-style design that is simple and easy to operate. However, many sporty elements can be seen in the Sagitar, such as the cannon-style instrument panel, flat-bottom steering wheel, and silver decorative panels, while high-end models are adorned with wood grain decorative panels.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.