What grade of engine oil should be used for China VI diesel vehicles?

How to deal with Audi A4L transmission failure while continuing to drive?

Slowly pull over to the side of the road and wait for assistance. Do not continue driving to prevent causing more serious damage. First, pull over to the side of the road and check if the hydraulic oil level is too high. Avoid excessive operations and wait for rescue. Drive the car to a 4S shop for inspection and add transmission fluid to ensure better lubrication for the transmission gears. Pull over to the roadside, contact the 4S shop after-sales personnel, and follow their instructions before taking any action. Park the car and let it rest for a few minutes. If the situation is severe, proceed to a 4S shop for inspection and repair.

8

5

Share

Can the Edge Armrest Box Accommodate a Refrigerator?

The Edge armrest box can accommodate a refrigerator, but heat dissipation must be considered. Placing a car refrigerator in the armrest box allows for easy access to items. Compressor car refrigerators generate some heat during cooling, requiring sufficient space for ventilation. Typically, a 3 to 5 cm gap should be left at the rear of the armrest box for proper ventilation. The Edge is a midsize crossover SUV produced by Changan Ford Automobile Co., Ltd., with dimensions of 4878mm (length), 1925mm (width), and 1770mm (height), a wheelbase of 2850mm, and a top speed of 192 km/h.

15

3

Share

Can the first maintenance of a new car be done at any 4S store nationwide?

The first maintenance of a new car can be done for free at any 4S store of the same brand nationwide. The maintenance manual of the vehicle includes the addresses of 4S stores, and you can choose the nearest one. Just bring the first maintenance voucher and the vehicle maintenance manual when getting the first maintenance done. Precautions before the first maintenance: 1. The valid time for the first maintenance varies depending on the brand and model of the vehicle; 2. After purchasing a new car, it is necessary to consult the sales consultant or after-sales service consultant for the specific first maintenance time to prevent missing the free first maintenance service; 3. Imported cars do not have free first maintenance services, and the cost of the first maintenance needs to be borne by the owner.

2

5

Share

What are the differences between Toyota Fortuner and Toyota Runner?

Here is an introduction to the differences between Toyota Fortuner and Toyota Runner: 1. Exterior comparison: (1) The Toyota Fortuner has dimensions of 4795/1855/1835mm (L/W/H), a wheelbase of 2750mm, minimum ground clearance of 225mm, and tire specifications of 265/65R17. Its exterior continues Toyota's family design language, featuring an inverted trapezoidal front grille with three chrome-plated horizontal slats, complemented by body decals and a rugged front bumper design. (2) The Toyota Runner measures 4705/1880/1840mm (L/W/H) with the same 2750mm wheelbase, but has a slightly lower ground clearance of 193mm and uses the same 265/65R17 tires. Its bold design enhances the vehicle's presence, resembling the Sequoia with muscular body lines that evoke a charging rhinoceros. The slightly concave side panels add a dynamic touch to this aggressive SUV. 2. Interior comparison: (1) The Fortuner offers a spacious and comfortable cabin with a streamlined one-piece dashboard. Its exceptionally large interior provides ample customization space, featuring foldable second and third-row seats that can accommodate over ten people when fully folded, making it ideal for travel or business use. (2) The Runner's interior primarily uses a two-tone color scheme with light-colored accents throughout. It comes equipped with full leather-wrapped seats, a satellite navigation system, and a multifunctional central display that offers passengers diverse options while adding numerous practical features and safety enhancements.

4

1

Share

How to Reset the Maintenance Light on a Bora?

To reset the maintenance light on a Bora: 1. Turn off the ignition switch; 2. Press and hold the button next to the speedometer with your right hand for about 30 seconds, then turn on the ignition switch. The mileage display light will flash or show the word "service"; 3. Rotate the clock adjustment button next to the speedometer clockwise; 4. Turn off the ignition switch and restart the vehicle. The Bora is FAW-Volkswagen's first independently designed model, with body dimensions of 4523mm in length, 1775mm in width, and 1467mm in height, a wheelbase of 2610mm, a top speed of 200km/h, and front-wheel drive.

10

3

Share

How to Engage Reverse Gear?

Engaging reverse gear can be done in the following ways: 1. The reverse gear is located at the position of the sixth or seventh gear, marked with a capital letter R. After depressing the clutch, simply shift into the position marked R; 2. For some vehicles, you need to press the gear lever downward before engaging reverse gear, otherwise, no matter how hard you try, you won't be able to shift into reverse; 3. Some gear levers have a ring that you can pull upward with your finger to engage reverse gear; 4. A few vehicles have a button on the gear lever that must be pressed to engage reverse gear; 5. Quickly flick the lever to the left to directly engage reverse gear; 6. For automatic transmission vehicles, simply pull the gear lever downward in the direction indicated to the R position.

11

5

Share

What grade of engine oil should be used for China VI diesel vehicles?

How to deal with Audi A4L transmission failure while continuing to drive?

Can the Edge Armrest Box Accommodate a Refrigerator?

Can the first maintenance of a new car be done at any 4S store nationwide?

What are the differences between Toyota Fortuner and Toyota Runner?

How to Reset the Maintenance Light on a Bora?

How to Engage Reverse Gear?

What is the normal range for winter tire pressure?

How to Deal with Oxidized Car Trim Strips?

How to Check the Coolant Level in a Car?

Why is the car window rolling up and down slowly?