What grade of engine oil is suitable for the Trumpchi GS5?

2 Answers
StLuke
07/24/25 9:01pm
According to the manufacturer's data, there are four different types of engine oil available for the Trumpchi GS5: Petronas SL-5W-40 mineral oil, Elf Super Sport SM-10W-40 (semi-synthetic), Elf Competizione SM-10W-40 (semi-synthetic), and Elf Evolution SM-5W-30 (fully synthetic). The specifications of the engine oil are explained as follows: 1. "W" stands for winter, and the number before "W" represents the viscosity at low temperatures. The smaller the number, the better the low-temperature fluidity of the oil, and the better the protection for the engine during cold starts. The number after "W" indicates the viscosity of the oil at 100°C. The higher the number, the higher the viscosity, providing better protection for the engine at high temperatures. 2. The freezing point temperature for 5W oil is -30°C, and for 10W oil, it is -25°C.
Was this review help?
15
5
Share
OZoey
08/10/25 2:28pm
I've read many owner's manuals for the Trumpchi GS5, and it recommends using SAE 5W-30 full synthetic engine oil, which provides excellent engine protection, especially in areas with significant temperature variations like ours. It ensures quick starts in winter and maintains viscosity even in high summer temperatures, reducing wear. I've been using this grade for several years, and the engine remains quiet and smooth, with oil changes needed only around every 8,000 kilometers. Remember to choose reputable brands like Shell or Castrol—don’t skimp and buy counterfeit products, as poor quality oil may clog the oil passages. Also, 5W-30 is equally suitable for hot southern regions; don’t be misled into using thicker oils. Regular maintenance is key—check the dipstick periodically and top up when low. This can easily extend your engine's lifespan by two to three years.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

How to Switch to Sport Mode in Volkswagen Lamando?

Volkswagen Lamando's sport mode is the S gear. When in D gear, pull down to switch to S gear. Introduction to S Gear: The so-called S gear refers to high RPM, high torque, and low power. When a car accelerates, it relies on high torque. The S gear increases the engine RPM, enhances torque, and achieves acceleration. The vehicle increases the RPM for upshifting, which does no harm to the car. However, it is advisable to use it sparingly during the break-in period, as high RPM and heavy load operation are not suitable for vehicles in this phase. Introduction to Lamando: The Lamando is a compact sedan launched by SAIC Volkswagen at the Chengdu Auto Show in August 2014. SAIC Volkswagen defines the Lamando as the 'first wide-body coupe,' built on the MQB platform, equipped with EA888 TSI and EA211 TSI engines, and featuring a dry 7-speed dual-clutch transmission. Positioned as a high-end, sporty compact car, it sits between the Lavida and the Passat in the lineup.
13
2
Share

What is the reason for the BMW X5 not gaining speed after shifting gears?

The reason for the BMW X5 not gaining speed after shifting gears is that the torque converter is not locked. Introduction to the BMW X5: The BMW X5 is the first four-wheel-drive SUV model under the BMW brand, launched in the United States at the end of 1999. This vehicle has a wheelbase of 2975mm, a weight of 2200 kilograms, a top speed of 243 kilometers per hour, and features front-engine four-wheel drive with a displacement of 2.0 or 3.0L. The currently available model is the fourth-generation product. Advantages of the BMW X5: The greatest advantage of the BMW X5 is that its exterior continues the family characteristics of BMW SUVs, showcasing BMW's design elements everywhere, with excellent panoramic sunroof and angel eye designs. The interior is simple and elegant, with exquisite details.
4
0
Share

What is the solution for the Geely Vision P0016 trouble code?

Geely Vision P0016 trouble code solution requires troubleshooting and repairing issues such as the camshaft position sensor or its circuit failure, crankshaft position sensor or its circuit failure, engine speed sensor failure, contaminated engine oil, stuck variable camshaft solenoid valve, etc. After addressing these issues, drive the car for a certain distance and then use the onboard diagnostic system to check. Definition of P0016 trouble code: P0016 is defined as Crankshaft Position/Camshaft Position Correlation. Reasons for the P0016 trouble code: The crankshaft converts the up-and-down motion of the pistons into rotational motion. The camshaft controls the opening and closing of the valves. The Engine Control Unit (ECU) continuously monitors the variable camshaft's timing position and checks the relative position between the camshaft and crankshaft. If the misalignment exceeds one tooth, this trouble code will appear.
2
5
Share

What causes the high voltage in Honda ELD?

The reason for the high voltage in Honda ELD is a fault in the vehicle's sensor electronic system. Resetting the sensor electronic system to factory settings can resolve this issue. In terms of handling: The compactly designed 5-speed automatic transmission minimizes shift shock, achieving a balance between fuel economy and high efficiency. It adopts new component design standards, enhancing the transmission's durability and overall performance. Additionally, a 5-speed manual transmission is specifically designed to meet the diverse needs of users, delivering pure driving pleasure. In terms of power: The Accord is equipped with world-leading i-VTEC and VTEC engines, combining high power and low fuel consumption. The outstanding i-VTEC engine integrates Honda's advanced VTEC (Variable Valve Timing and Lift Electronic Control) technology with VTC technology, which continuously adjusts the valve timing phase across different engine speed ranges, providing strong torque output and sharp acceleration performance. Through the ECU electronic control unit, the opening and closing of the intake and exhaust valves are controlled to maintain optimal engine combustion, achieving an ideal balance of high power output, low fuel consumption, and clean emissions.
16
4
Share

Does Subaru's Four-Wheel Drive Need Maintenance?

Subaru's four-wheel drive needs maintenance. Reasons for maintenance: First, the battery may lose charge over such a long period, requiring battery maintenance. Additionally, the car's oil, if left for a year, can deteriorate over time, which is also not good for the car's engine. It is advisable to have it serviced at a 4S shop. Subaru's philosophy: This brand concept represents Subaru's intelligent and sensitive approach to automobiles. It signifies Subaru's goal of achieving excellent driving performance, which is a car that highly integrates driving, environment, and safety. It is this integration that leaves an indelible impression on customers worldwide, especially those who truly enjoy the driving experience. Furthermore, Subaru is committed to providing consistent value in both new products and services.
11
0
Share

Does the BMW 5 Series have lane keeping?

BMW 5 Series does not come with a lane keeping assist system as standard, but it can be optionally installed. Introduction to Lane Keeping Assist System: The lane keeping assist system is a type of intelligent driving assistance system. Based on the Lane Departure Warning System (LDWS), it assists the vehicle in staying within the lane by controlling the steering system. While driving, the system uses a camera to identify the lane markings and helps keep the vehicle in the lane. If the vehicle approaches the identified lane markings and is at risk of leaving the lane, it alerts the driver through steering wheel vibrations or audible warnings, and slightly adjusts the steering to correct the vehicle's direction, keeping it in the correct lane. If the system detects no active driver intervention for an extended period, it will issue an alarm to remind the driver. Prerequisites for the Lane Keeping Assist System: This system is primarily used on structured roads, such as highways and roads with good pavement conditions (clear lane markings). It becomes operational when the vehicle speed reaches 65 km/h or above.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.