What grade of engine oil is suitable for the 1.5T Ford Kuga?

What is the function of car mirrors?

The function of car mirrors is to observe road conditions, judge the distance from the following vehicle, etc. The specific introduction is as follows: Observing road conditions: While driving, the driver can observe the road conditions on both sides through the mirrors, thereby performing operations such as lane changing and overtaking. Reference points: During operations such as parallel parking or reversing into a parking space, reference points can be observed through the mirrors. Judging the distance from the following vehicle: Pay special attention to the central rearview mirror. Through the central rearview mirror, you can judge the distance from the following vehicle. When you can just see the front wheels of the following vehicle in the central rearview mirror, the distance between the vehicles is about 13 meters. When you can see the grille, the distance is about 6 meters. When you can just no longer see the grille, the distance is about 4 meters.

8

5

Share

How to Remove the XTS Air Conditioning Filter?

xts air conditioning filter removal method: 1. Pull out the glove compartment on the passenger side. 2. Pull outward on the fixed handle on the left side of the glove compartment. 3. Remove the buckle from the handle. 4. Push the glove compartment simultaneously on both sides to remove it. 5. The air conditioning filter will be visible; press firmly on the fixed buckle to remove the filter. Cadillac XTS introduction: 1. Body dimensions: length, width, and height are 5131mm, 1852mm, and 1501mm respectively, with a wheelbase of 2837mm. 2. Powertrain: two differently tuned 2.0T turbocharged direct injection engines are available, with maximum power outputs of 184kW and 198kW respectively, both with a peak torque of 400Nm.

1

3

Share

Can I directly apply for an A1 driver's license now?

A1 driver's license cannot be obtained directly. The following are the application requirements for an A1 driver's license: Upgrade to obtain: Since the A1 driver's license can only be obtained through upgrading, you must already have one of the A3, B1, or B2 licenses before applying for an A1 license. You can apply for an A1 license only after five years of holding either an A3 or B1 license, and you must not have accumulated 12 penalty points in any of the recent five scoring cycles. For those holding a B2 license, the upgrade period can be reduced from five years to three, provided there is no record of accumulating 12 penalty points in any corresponding scoring cycle. Physical conditions: Height and age: Applicants must be between 22 and 60 years old and at least 155 cm tall. Vision and hearing: Uncorrected or corrected vision in both eyes must reach 5.0 or above. Applicants must be able to distinguish the sound of a tuning fork from 50 cm away, have normal physical activity, and no obvious defects.

7

2

Share

How Long Can a Car Sit Without Being Started?

After being parked for a week, the car should be started once to recharge the battery. It is recommended to start the car every two weeks and drive it for 3 to 5 kilometers to maintain its performance. Prolonged inactivity can lead to various issues, including paint damage, battery drain, rubber aging, and fluid deterioration. Below are suggestions for long-term vehicle storage: 1. Clean the vehicle thoroughly: Before parking, clean both the exterior and interior of the car. Applying wax or a protective coating can help prevent paint corrosion. If possible, store the car in a garage. If parking outdoors, use a car cover to protect it from sun, rain, and debris like fallen leaves. 2. Avoid engaging the parking brake tightly: For long-term parking, it is best not to engage the parking brake too tightly. The brake system can react with moisture and oxygen in the air, leading to rust on the brake discs and pads. This can cause them to stick together, affecting braking performance and potentially causing wheel lock-up upon restart. 3. Increase tire pressure: Raise the tire pressure to around 2.8 to prevent tire deformation. Additionally, park on a flat surface to minimize tire damage. Parking on uneven surfaces for extended periods can cause tire deformation. 4. Prevent battery drain: Even when not in use, car batteries self-discharge. A good battery may deplete in about three months, while lower-quality ones may discharge faster. To avoid total discharge and battery failure, start the engine every 1-2 weeks. This also helps prevent internal engine rust. 5. Start the car periodically: Vehicles left unused for long periods may experience oxidation of engine oil, brake fluid, coolant, and electrolyte. Regularly starting the car and driving it briefly allows the engine to reach normal operating temperature. Before using the car again, replace the engine oil and other fluids and perform appropriate maintenance.

9

0

Share

What does it mean when the SET light on the car dashboard is on?

The SET light on the car dashboard indicates low tire pressure. 1. The SET light is part of the tire pressure monitoring system. When it illuminates, it means the inflation pressure in one of the tires is too low. 2. Generally, a car's tire pressure monitoring system uses wheel speed sensors to detect the rotation speed of each wheel. When the speed difference between one wheel and the others reaches a certain threshold, the system will determine that the tire is underinflated, causing both the SET button light and the dashboard tire pressure warning light to illuminate to alert the driver. 3. The illumination of the SET light is most likely caused by abnormal tire pressure. Many modern vehicles are equipped with tire pressure monitoring systems. When the sensors detect abnormal tire pressure, the dashboard will alert the driver to check the tires, and in some vehicles, the "SET" button on the center console will also light up simultaneously.

10

4

Share

If China 6 is implemented, can China 5 vehicles still be registered?

After the implementation of China 6, China 5 vehicles can no longer be registered, but newly registered China 5 vehicles can still continue to be used. The following is an introduction to China 5 and China 6: Introduction to China 6 standards: Compared to China 5, China 6 standards impose stricter requirements on carbon monoxide, nitrogen oxides, and hydrocarbons in emissions. Additionally, China 6 standards include new regulations on PN particulate matter. Introduction to China 5 standards: During the China 5 phase, emission standards for diesel and gasoline vehicles were different. However, China 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. Differences between China 6 and China 5: After the formal implementation of China 6 standards, the main impact will be on new vehicle production, import, sales, and registration. Existing China 5 vehicles will no longer be allowed to be registered, but previously registered China 5 vehicles can still be used, will not affect normal annual inspections, and can be traded as used vehicles. China 6 standards will be among the strictest in the world. After July 1, 2019, China 5 vehicles will no longer be registrable in most regions of the country, and many regions have or will implement China 6 standards ahead of schedule.

12

5

Share

What grade of engine oil is suitable for the 1.5T Ford Kuga?

What is the function of car mirrors?

How to Remove the XTS Air Conditioning Filter?

Can I directly apply for an A1 driver's license now?

How Long Can a Car Sit Without Being Started?

What does it mean when the SET light on the car dashboard is on?

If China 6 is implemented, can China 5 vehicles still be registered?

How is the GS4235T engine?

Who Invented the Car?

What is the correct way to handle sudden loss of vehicle control?

What is the normal mileage for a new car when picking it up?