What gear should be engaged when parking on a downhill slope?

1 Answers
MacCamille
07/25/25 6:22am
When parking on a downhill slope, you should engage the reverse gear. If you are stopping on a flat road, first shift to neutral, apply the handbrake, and then turn off the engine. If you are on a slope, engage the reverse gear (for downhill sections) before turning off the engine to prevent the car from rolling forward. Parking on a slope with the gear engaged is actually an auxiliary measure to the handbrake. If you are still not confident after engaging the reverse gear, you can place a brick in front of the car's tires. Remember to apply the handbrake first, as this acts on the braking system rather than the transmission gears. Engaging a gear on a slope can help prevent the car from rolling, but the primary reliance should still be on the handbrake. The engine braking only serves as an auxiliary function. If the parking slope is particularly steep, placing a brick is advisable.
Was this review help?
8
3
Share
More Forum Discussions

What is the maintenance interval for a dry dual-clutch transmission?

The maintenance interval for a dry dual-clutch transmission is two years. Key usage precautions include: 1. Avoid sudden acceleration when going uphill; 2. Do not abruptly press the accelerator after braking; 3. Switch to manual mode in congested areas; 4. Avoid frequent sudden braking; 5. Regularly add engine oil. The dry dual-clutch transmission consists of two clutch plates and a coaxial intermediate disk. Its working principle involves two clutch plates on each side, connecting to gears 1, 3, 5, 7 and gears 2, 4, 6, reverse respectively. The intermediate disk moves between them, engaging or disengaging with the two clutch plates to shift gears.
4
0
Share

How often should the Verna fuel filter be replaced?

The Verna fuel filter should be replaced every two years or 20,000 kilometers. The function of the fuel filter is to remove impurities from gasoline. Taking the 2020 Verna as an example, it is a compact car with body dimensions of: length 4300mm, width 1705mm, height 1460mm, wheelbase 2570mm, minimum ground clearance 150mm, and curb weight 990kg. The 2020 Verna is equipped with a 1.4L inline 4-cylinder naturally aspirated engine, delivering maximum power of 95PS, maximum torque of 132Nm, and maximum output of 70kW, paired with a 5-speed manual transmission.
15
1
Share

What is the engine brand of Infiniti?

Infiniti's engine brand is Infiniti, which functions by converting the thermal energy of gasoline or diesel into mechanical energy through the combustion and expansion of gas in a sealed cylinder, thereby driving the piston to perform work. Taking the 2019 Infiniti Q50L as an example, it is a mid-size car equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 211 PS, a maximum torque of 350 Nm, and a maximum power of 155 kW. The 2019 Infiniti Q50L has body dimensions of 4867 mm in length, 1823 mm in width, and 1456 mm in height, with a wheelbase of 2898 mm, a minimum ground clearance of 190 mm, and a curb weight of 1721 kg.
6
3
Share

What is the first maintenance mileage for the 2019 Bora?

The first maintenance for the 2019 Bora is at 5,000 kilometers. The maintenance items include: 1. Replacement of engine oil, oil filter, air filter, and fuel filter; 2. Inspection of the body and tires; 3. Inspection of the braking system; 4. Inspection of the chassis for damage; 5. Inspection of fluid levels. The benefits of car maintenance: 1. Ensures the vehicle's optimal performance; 2. Improves driving safety; 3. Reduces engine noise; 4. Extends the vehicle's service life. The 2019 Bora has a body length, width, and height of 4663mm, 1815mm, and 1462mm respectively, with a fuel tank capacity of 50 liters.
4
0
Share

What is the emission standard for the 2019 Classic Sylphy?

2019 Classic Sylphy complies with China VI emission standard. Its body dimensions are: length 4631mm, width 1760mm, height 1503mm, with a wheelbase of 2700mm, minimum ground clearance of 166mm, curb weight of 1188kg, and trunk capacity of 50 liters. The 2019 Classic Sylphy features MacPherson strut front suspension and torsion beam rear suspension, with front-wheel drive configuration. It is equipped with a 1.6L inline 4-cylinder turbocharged engine delivering maximum power of 126PS, peak torque of 168Nm, and maximum output of 93kW, mated to a 5-speed manual transmission.
13
5
Share

Should the Sonata 8 use 20 or 30 viscosity oil?

The Sonata 8 can use 20 viscosity oil, as all models of the Sonata 8 are equipped with naturally aspirated engines. The engine temperature of the Sonata 8 is not very high during operation, and since it is not a performance car, the requirements for oil viscosity are not as stringent. Here are some details about the Sonata 8: Engine: The Sonata 8 uses two types of engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.4-liter naturally aspirated engine. Suspension: The front suspension of the Sonata 8 uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.