What functions are hidden in the xrv?

2 Answers
DelEvan
07/29/25 3:19am
xrv key functions are hidden, such as automatic locking and smart door opening. The following are the specific introductions to the hidden functions of the car key: 1. Close the window after turning off the engine: Long press the lock button on the remote key to close the window. This function may also be equipped on ordinary family cars. 2. Parking lot car search: Some car keys have a special car search button. For some vehicles, pressing the lock button twice in a row will make the vehicle emit a very harsh whistle to inform its location, making it easy to quickly find the car in places with many vehicles. 3. Automatic trunk opening: Many models have a trunk opening button on the remote key. Long press the trunk unlock button, and the trunk will automatically open. 4. Child safety lock: Most are located on the rear door of the car and require a mechanical key to lock.
Was this review help?
4
0
Share
LeLogan
08/12/25 7:10am
When I first started driving the XR-V, I didn't notice much, but over time I discovered many practical features hidden in this car. The remote key can control the window roll-up/down, which is super convenient for cooling down in summer - hold the unlock button to fully open windows, and long-press the lock button to automatically close them. During reverse, the side mirrors automatically tilt down to see curbs clearly (this needs to be enabled in settings). The instrument cluster has an engineering mode to check various data - hold the trip reset button while powering on after engine shutdown. The windshield wipers have a maintenance mode - flick the wiper stalk within 30 seconds after power off to make them stand vertically. Even the TPMS reset is a hidden operation - long-press the tire pressure button for seconds until lights flash.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

Can Engine Cylinder Scuffing Be Covered by Insurance?

Can Engine Cylinder Scuffing Be Covered by Insurance? The causes of engine cylinder scuffing are as follows: Failure to perform timely car maintenance: Engine oil effectively reduces the friction generated during engine gear operation, thereby protecting the engine. If maintenance is neglected for a long time, the friction during engine operation will increase significantly, making cylinder scuffing more likely to occur. Excessively high engine coolant temperature: When the coolant temperature is too high, the engine cannot be effectively cooled, leading to continuous expansion and deformation. The tolerances between components gradually increase, naturally resulting in engine cylinder scuffing. Excessive carbon buildup in the engine: A large amount of carbon deposits can cause some carbon to be carried along during piston movement within the cylinder, ultimately increasing the friction between the piston and the cylinder, which can lead to cylinder scuffing.
8
4
Share

How to Remove the Logo from Car Film?

Methods to remove the logo from car film: 1. Use alcohol to wipe it off. Dip a towel, tissue, or cotton swab in alcohol and gently wipe the logo. After wiping, make sure to clean off the alcohol with water; 2. Use tar remover or asphalt cleaner. Spray the tar remover or asphalt cleaner on the logo watermark on the film—use an appropriate amount, not too much. This type of reagent evaporates quickly, so wipe it immediately with a towel after spraying. After removing the logo, rinse with water. Reasons for applying car film: 1. Car film provides heat insulation; 2. Car film blocks UV rays; 3. Car film helps prevent glass shattering; 4. Car film offers privacy for the car owner. Car film is not a necessity; car owners can choose whether to apply it based on their needs.
14
1
Share

How to Replace the Rear Wiper of CX4?

Steps to replace the rear wiper of CX4: 1. Lift the wiper, there is a clip underneath, press the clip and remove the original wiper; 2. Lift the front of the clip, insert the new wiper into the middle clip and tighten it until you hear a click, indicating the new wiper is in place. The wiper is an important component installed on the car, which can sweep away rain, snow, and dust on the glass, and sometimes requires the assistance of windshield washer fluid for better cleaning. The lifespan of wipers on most cars is about two to three years, and improper maintenance will shorten their lifespan. When washing the car, the wipers should be cleaned separately, especially the rubber blade part, which is particularly prone to getting dirty. To avoid forcibly turning on the wipers in winter, the owner should lift the wipers upright. If frost is found on the windshield, the car should be started to warm up first, then scraped clean with a card, and the hot air should be turned on to eliminate windshield fog.
3
2
Share

How to Remove Oil Stains from Car Paint?

Steps to remove oil stains from car paint: 1. Prepare car-specific washing liquid, a sponge, and a car-washing cloth; 2. Wet the areas with oil stains on the car body with water; 3. Pour the washing liquid onto the sponge, rub it into foam, and apply it to the oil-stained areas; 4. Wipe with the sponge—do not scrape with nails or use rough cloth to scrub back and forth, as this can easily scratch the paint; 5. Rinse off the foam from the car with water; 6. Wipe away the oil stains with a car-specific microfiber towel. Precautions for removing oil stains from car paint: Thoroughly clean any debris from the sponge and towel to prevent small stones from scratching the paint.
6
5
Share

What level of car does the Tiida belong to?

Tiida belongs to the A-segment compact car category. It is the hatchback version of the Latio, with both models featuring a 1.6L engine. The exterior design incorporates more curved lines, giving the new Tiida a rounder and more fashionable appearance. The triangular headlights and front grille lend the Tiida a somewhat aggressive front face, while the wavy waistline on the side adds tension and a sense of dynamism. The Tiida's body dimensions are 4205mm in length, 1695mm in width, and 1540mm in height, with a wheelbase of 2700mm. The car is equipped with a comprehensive safety system, including ABS anti-lock braking system with EBD electronic brake-force distribution, BA brake assist system, rear windshield with wiper, and high-mounted brake light as standard active safety features.
9
2
Share

What is the procedure for handling a car scratch accident?

The procedure for handling a car scratch accident is: 1. Stop the car, turn off the engine, and check the situation: After a car scratch accident occurs, immediately choose a suitable location to stop the car. After stopping, tighten the handbrake as required, cut off the power, and set up a hazard warning sign as per regulations; 2. Call the police first if there are casualties: Confirm the safety status of both parties; 3. Document vehicle damage: Use digital tools to record the scene when checking the vehicle condition; 4. Record basic information: Record the vehicle and owner information of both parties; 5. Vehicle damage assessment and insurance claim: First, go to the insurance claim service center for vehicle damage assessment. During the subsequent car repair process, keep the repair invoice and use it along with other valid documents to obtain the corresponding insurance compensation.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.