What features does the Skoda Octavia have?

What is the normal range for tire pressure values?

The normal tire pressure for car tires is between 2.2 and 2.5 bar. Both excessively high and low tire pressure can have adverse effects on the vehicle. You can use an electronic tire pressure detector or a mechanical tire pressure gauge to check and then adjust the tire pressure appropriately. Effects of overinflated tires: Overinflated tires reduce the contact area between the tire and the ground, leading to a significant increase in pressure and wear per unit area. This can easily cause braking failure, potential tire bursts when encountering road protrusions or depressions, damage to the vehicle's suspension system, and discomfort during rides. Effects of underinflated tires: Underinflated tires increase the contact area between the tire and the ground, causing abnormal temperature rises inside the tire during driving. Additionally, severe deformation of the tire sidewalls accelerates the aging of internal steel wires and fabric layers, increasing the risk of tire bursts. It also leads to higher fuel consumption and reduced tire lifespan. Regular tire pressure checks: Tire pressure is a crucial factor affecting tire lifespan. Both overinflation and underinflation can reduce tire longevity to some extent. It is recommended to check the tire pressure at least once a month. Regular tire rotation: Since each tire operates under different conditions and loads—generally, rear tires bear more load than front tires, and right tires bear more load than left tires—it is essential to perform tire rotations in a timely manner as part of car maintenance.

2

1

Share

What are the body dimensions of the GAC Trumpchi GS4?

The body dimensions of the GAC Trumpchi GS4 are: length 4545mm, width 1856mm, height 1668mm, wheelbase 2680mm, minimum ground clearance 190mm, fuel tank capacity 55l, luggage compartment volume 470l, and curb weight 1480kg. The GAC Trumpchi GS4 features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, maximum power of 124kw, maximum torque of 265nm, paired with a 6-speed manual transmission.

9

2

Share

What is the reason for the exclamation mark on the engine fault light?

The reasons for the exclamation mark on the engine fault light are: 1. Poor gasoline quality leading to incomplete combustion of the mixture in the cylinder, resulting in carbon deposits; 2. Excessive engine mileage causing weakened spark plug performance; 3. Aging vehicle mechanics; 4. Damage, poor contact, or signal interruption of sensors such as water temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. The hazards of the engine fault light being on include: 1. Deterioration of vehicle exhaust quality, polluting the environment; 2. Increased combustion chamber temperature and accelerated wear, leading to premature engine damage; 3. Engine oil burning; 4. Increased engine noise, affecting driving and riding comfort.

3

0

Share

What does 'several differential locks' mean?

In the process of learning about cars, we often hear terms like 'one differential lock' or 'two differential locks.' Below is a detailed introduction to differential locks: 1. Definition: A differential lock can be seen as a differential with a locking function, which can be further divided into axle differential locks and center differential locks. Let's first talk about axle differential locks. Their function is to completely lock the differential when one side of the wheels loses traction, transferring torque to the wheels on the other side to achieve escape from difficult situations. 2. One differential lock: In the case of full-time four-wheel drive, it usually refers to the center differential lock, such as in some models of the Land Cruiser 4000 and the Prado 2700. For part-time four-wheel drive models, it refers to the rear axle differential lock, such as in the Toyota FJ Cruiser and the Toyota 4Runner TRD. 3. Two differential locks: In full-time four-wheel drive, it refers to the center differential lock and the rear axle differential lock, such as in the Nissan Patrol and some models of the Land Cruiser. For part-time four-wheel drive, it refers to the front axle differential lock and the rear axle differential lock, which is essentially equivalent to the three locks of full-time four-wheel drive. Representative models include the Jeep Wrangler Rubicon and the Mitsubishi Pajero V87. 4. Three differential locks: This scenario only occurs in full-time four-wheel drive, referring to the front axle differential lock, center differential lock, and rear axle differential lock. Representative models include the Mercedes-Benz G-Class and the Land Rover Defender.

13

0

Share

Can the A button in the car be kept on for a long time?

It can be kept on for a long time. The A button in the car is the auto-hold function. After activating the auto-hold function, it can avoid frequent operation of the handbrake or electronic handbrake. Related introduction of auto-hold: Vehicles with electronic handbrakes are generally equipped with the auto-hold function. This function is not enabled by default and needs to be manually activated by the driver. After activating the auto-hold function, it can avoid frequent operation of the handbrake or electronic handbrake, and automatic transmission models do not need to frequently switch between D to N and D to P. When the vehicle is braked to a stop during driving, even if the brake pedal is released, the vehicle may not continue to move. Only when the accelerator pedal is pressed again will the vehicle continue to move forward. The English name of auto-hold is AUTOHOLD, and this button is mostly placed next to the electronic handbrake. The role of auto-hold: When encountering a short stop at a traffic light, the system will automatically brake the wheels after the vehicle stops to prevent rolling; When starting on an uphill slope, the system will automatically brake to prevent rolling back. After starting, the system will automatically release the wheels and move forward directly; When parking and locking, there is no need to pull the handbrake. The system will automatically brake the wheels at this time, but this is only seen in some models.

10

4

Share

What is the fuel tank capacity of the 2020 Honda Avancier?

2020 Honda Avancier has a fuel tank capacity of 53 liters. The fuel tank capacity measures a vehicle's ability to carry fuel, which determines the driving range. The 2020 Honda Avancier is a mid-size SUV with body dimensions of 4585mm in length, 1942mm in width, and 1670mm in height, a wheelbase of 2820mm, a trunk capacity of 510 liters, and a curb weight of 1708kg. It is equipped with a 1.5T turbocharged engine delivering a maximum horsepower of 193 PS, a maximum power of 142 kW, and a maximum torque of 243 Nm, paired with a continuously variable transmission (CVT).

16

5

Share

What features does the Skoda Octavia have?

What is the normal range for tire pressure values?

What are the body dimensions of the GAC Trumpchi GS4?

What is the reason for the exclamation mark on the engine fault light?

What does 'several differential locks' mean?

Can the A button in the car be kept on for a long time?

What is the fuel tank capacity of the 2020 Honda Avancier?

What to Do When the Lynk & Co 01 New Energy's Autonomous Emergency Braking Activates Automatically?

What is the vehicle class of the Haval M6?

Do I Need to Replace Brake Pads When Changing Brake Discs?

What is the headlight height?