What faults will occur if the car fan resistor is damaged?

1 Answers
OJake
07/29/25 2:46pm
Blower resistor mainly controls the blower speed. If the blower resistor is damaged, the blower speed will remain the same across different gear positions. After the blower resistor fails, the air volume control knob loses its speed regulation function. This is a component in the air conditioning system that is prone to damage. 1. Principle of car air conditioning: During heating, high-temperature coolant from the engine flows through the heater core. During cooling, the AC button needs to be pressed so that the compressor clutch engages and the engine drives the compressor to operate. 2. Additional information: When cleaning the air conditioning system, avoid using low-quality foam cleaners as they may damage the blower. There is a bearing in the blower; lack of lubrication in this bearing will cause abnormal noise during blower operation.
Was this review help?
20
1
Share
More Forum Discussions

What Causes a Car to Suddenly Stall While Driving Normally?

The reasons why a car suddenly stalls while driving normally are: 1. The car's anti-theft system is triggered, causing the engine to lock; 2. Ignition switch failure; 3. Damaged ignition module or damaged ignition reference signal line from the ignition module to the engine computer; 4. Low fuel pump pressure, fuel line leakage, small supply current, or damaged fuel pressure regulator; 5. Carbon deposits in the engine. The solutions for a car suddenly stalling while driving normally are: 1. Check if the car's anti-theft system is triggered; 2. Check the working condition of the ignition switch; 3. Check if the ignition module and signal line are faulty; 4. Check if there is fuel line leakage; 5. Clean carbon deposits in the engine; 6. Check if the battery has sufficient power.
10
2
Share

What does 0w40 engine oil represent?

0w40 engine oil represents: the oil can still flow normally at minus 35 degrees Celsius, and 40 is the high-temperature viscosity of the oil. The functions of engine oil are: lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion prevention, and shock absorption. The method for changing engine oil is: 1. Lift the car, remove the guard plate, and place a container of about 10 liters under the oil drain screw; 2. Unscrew the oil drain screw and use an air gun to blow for two minutes at the oil filling port; 3. After draining, tighten the oil drain screw and wipe it with a paper towel to check for leaks; 4. Reinstall the guard plate and lower the car, then use a funnel to align with the oil filling port to add engine oil.
19
2
Share

Does the dash cam continue recording after the car is locked?

The dash cam continues recording after the car is locked, but the recording duration is not very long. The steps to playback the dash cam footage are: 1. First remove the TF memory card; 2. Insert the TF memory card into a card reader and connect it to the computer via the USB port; 3. Read the video files from the removable hard drive; 4. Select and playback the desired video files. The repair method for the dash cam is: 1. Remove the SD card; 2. Check the side of the dash cam, locate the reset hole, and gently push it with a bamboo stick; 3. Press the power button to start normally; 4. Format the SD card and reinsert it.
19
0
Share

What is the black ball on the center console of the Haval M6?

The black ball on the center console of the Haval M6 is the photosensitive element for the automatic headlights. When the headlights are set to 'auto', they will automatically turn on if the external illumination is insufficient. Taking the 2021 Haval M6 as an example, it is a compact SUV with the following dimensions: length 4664mm, width 1830mm, height 1729mm, wheelbase 2680mm, front and rear track 1565mm, and curb weight 1500kg. The 2021 Haval M6 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 210Nm, paired with a 6-speed manual transmission.
6
1
Share

What is the beginning of license plate numbers in Hubei Province?

Hubei Province license plate numbers begin with 'E', and the license plate codes for various regions in Hubei Province are: Ea for Wuhan City, Eb for Huangshi City, Ec for Shiyan City, Ed for Jingzhou City, Ee for Yichang City, Ef for Xiangfan City, Eg for Ezhou City, Eh for Jingmen City, Ej for Huanggang City, Ek for Xiaogan City, El for Xianning City, Em for Xiantao City, En for Qianjiang City, Ep for Shennongjia Forestry District, Eq for Enshi Tujia and Miao Autonomous Prefecture. The functions of license plates are: 1. Identification of vehicles; 2. Indication of the vehicle's registered region; 3. Access to the vehicle owner's and registration information based on the license plate.
3
0
Share

How to deal with the tire pressure monitoring system failure in Haval H6?

Haval H6 tire pressure monitoring system failure solutions are: 1. Get off the car to check and confirm whether the tire condition is normal and if there is any air leakage; 2. Pull out the key and reinsert it to start; 3. If there is still no tire pressure monitoring, you can start the vehicle and drive at low speed for about five minutes; 4. Remove the negative terminal of the car battery, wait a few minutes, then reinstall it and insert the key to reset the central control; 5. Replace the battery. Taking the 2021 Haval H6 as an example, it belongs to the compact SUV category, with body dimensions of: length 4615mm, width 1860mm, height 1720mm, wheelbase of 2680mm, fuel tank capacity of 58l, and curb weight of 1675kg.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.