What engines does the Toyota Avalon come with?

1 Answers
Legolas
07/29/25 7:53pm
Toyota Avalon is equipped with two engines: a 2.0L and a 2.5L, with displacements of 1987ml and 2487ml respectively. The 2.0L version has 4 cylinders arranged in an L formation, features natural aspiration for air intake, utilizes hybrid injection for fuel supply, and recommends the use of 92-octane gasoline. The 2.5L version also has 4 cylinders in an L arrangement, employs natural aspiration, has a compression ratio of 13, and uses a DOHC valve train. The Avalon is Toyota's flagship model, initially introduced to the U.S. market in the 1990s. In 2018, Toyota unveiled the all-new fifth-generation Avalon at the Detroit Auto Show, built on Toyota's new TNGA platform, offering both hybrid and gasoline-powered variants.
Was this review help?
19
4
Share
More Forum Discussions

What to Do If There Is Abnormal Noise After Replacing Brake Pads?

Abnormal noise from brake pads can affect normal driving. The causes and solutions for abnormal noise after replacing new brake pads are as follows: 1. There is abnormal noise when braking, but no noise when not braking. This situation is caused by wear between the brake pads and the brake disc. After prolonged use, the old brake pads and brake disc have formed a certain complementary shape. When new brake pads are installed, the edges of the pads may not make even contact with the brake disc, leading to friction and abnormal noise. Solution: First, sand the edges of the brake pads to ensure they do not rub against the brake disc, which can eliminate the noise. If this does not work, the brake disc must be sanded and polished using a brake disc resurfacing machine to resolve the issue. 2. Issues with the brake pad material. If non-standard brake pads are used, the larger particles in the material can easily cause abnormal noise when braking. Solution: Replace with high-quality brake pads, such as ceramic brake pads.
9
2
Share

How to Open the Hood of a Mercedes-Benz C-Class?

Mercedes-Benz C-Class hood opening steps are as follows: 1. Inside the car at the driver's position, near the left foot area (close to the left front wheel), locate a pull lever. Pull it once to release the hood latch. 2. Move to the front of the vehicle and insert your hand into the gap where the hood has popped up (center of the front end). 3. Feel for a pressable latch inside. Press this switch while simultaneously lifting the hood to fully open it. 4. Above the driver's footwell, there's a red release lever - flip it upward. 5. At the front center of the vehicle, pull the hood release handle that appears, then lift the hood upwards using this handle.
4
3
Share

What does the D gear mean?

D gear stands for Drive gear, and the detailed introduction is as follows: 1. D is the abbreviation of Drive, located after the Neutral position. When the gearshift lever is placed in this position, the hydraulic control system automatically engages the corresponding forward gear circuit based on throttle opening signals and vehicle speed signals. The planetary gear system, under the control of the actuating elements, achieves the corresponding gear ratio. As driving conditions change, it automatically shifts between forward gears (switching between D1 and D4), realizing the automatic transmission function. 2. D gear is the most common gear in automatic transmission vehicles, usually located in the middle-rear position of the gearshift console, behind the N (Neutral) gear. Its purpose is to enable the vehicle to automatically select the appropriate gear while moving forward. 3. Forward gears are not limited to D gear; they also include M (Manual) gear, S (Sport) gear, L (Low) gear, and numerically labeled restricted gears such as 1st, 2nd, and 3rd. Driving gears consist of both forward and reverse gears, while the counterpart to driving gears is Neutral, which means no gear is engaged.
19
3
Share

What Does It Mean When the Red Engine Oil Light Comes On?

The reasons for the red engine oil light coming on are as follows: 1. Insufficient oil level, which reduces the oil pump's output or causes it to fail to pump oil due to air intake, leading to a drop in oil pressure; 2. Overheating of the engine, which can thin the oil, causing it to leak excessively through the clearances and resulting in decreased oil pressure; 3. Damage to the oil pump components or excessive gaps due to wear and tear or improper assembly, which can cause the oil pump to fail to deliver oil or deliver insufficient oil; 4. Improper clearance between the crankshaft and the bearings—too tight will increase oil pressure, while too loose will decrease it; 5. Clogged oil filter or oil suction screen, which can also reduce oil pressure; 6. Damaged or malfunctioning relief valve: If the main oil passage relief valve spring is fatigued, softened, or improperly adjusted, or if the valve seat and ball bearing wear or get stuck by debris, preventing proper sealing, the return oil volume will significantly increase, and the main oil passage pressure will drop accordingly; 7. Incorrect oil selection: Using the wrong oil or an inappropriate grade can increase oil leakage due to low viscosity during engine operation, thereby reducing oil pressure.
11
2
Share

What are the differences between 1.4L and 1.5L?

1.4L and 1.5L differ in the following aspects: 1. Engine Power: The 1.4T is turbocharged, offering stronger power than the 1.5L, but it is more expensive and costs more for maintenance. 2. Engine Power: The 1.5L has weaker power, and cars equipped with 1.5L generally have poorer acceleration performance, but they are cheaper and cost less for maintenance. 3. Engine Power: The 1.4T has better displacement compared to the 1.5L, but it consumes more engine oil. 4. T stands for turbo, meaning turbocharged. L stands for liter, indicating the engine's displacement in liters. Engines marked with L without a T are generally naturally aspirated engines.
16
5
Share

How to activate the anti-pinch function for Nissan Qashqai windows?

To activate the anti-pinch function for Nissan Qashqai windows, follow these steps: 1. Turn on the ignition switch, then lower the window halfway. Press the window switch to raise the window to the top, and keep holding the switch for 1-2 seconds after the window reaches the top; 2. Release the switch. Taking the 2017 Nissan Qashqai as an example, it is a compact SUV with the following dimensions: length 4384mm, width 1837mm, height 1594mm, wheelbase 2646mm, minimum ground clearance 199mm, and curb weight 1358kg. The 2017 Nissan Qashqai is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 117PS, maximum torque of 190Nm, and maximum power of 86kW, paired with a 6-speed manual transmission.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.