What engines are used in the domestically produced BMW 1 Series?

Can the Sylphy be used for Didi?

The Sylphy can be used for Didi. The Sylphy meets the requirements for Didi ride-hailing with its spacious interior, high configuration, low fuel consumption, and high ground clearance. Here are the relevant details about the Sylphy: 1. Powertrain: It is equipped with a 1.6L naturally aspirated engine that complies with the China VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox. 2. Smart Features: The new car comes with the latest Nissan-Connect super-intelligent system, featuring an 8-inch high-definition capacitive touchscreen. This system includes functions such as voice control for the vehicle and remote control capabilities. The voice control allows for simple commands to operate the online entertainment system, all-time online navigation, Bluetooth phone, driving recorder, and air conditioning. The remote monitoring and control function enables seamless connectivity between the smart APP and the user's smartphone, providing comprehensive awareness of the vehicle's status. It also allows remote control of the door locks, lights & horn, engine, and air conditioning based on specific needs.

18

2

Share

How to Deal with Infiniti Start-Stop System Error?

Check if there is any fault in the start-stop system and the vehicle's electrical circuit system. It is recommended to contact the local 4S store for inspection as soon as possible. The following is relevant information: 1. Introduction to the start-stop system: The system is translated into English as: Start-Stop system; when the vehicle is in a stopped state (non-parking state), the engine will pause operation (instead of maintaining traditional idling). During the pause, the lubricating oil inside the engine will continue to circulate, keeping the engine internally lubricated; when the brake pedal is released, the engine will start again. At this time, because the lubricating oil has been circulating continuously, even frequent stops and starts will not cause wear to the internal parts of the engine. 2. Working principle: The driver sits in the cockpit, the red light at the intersection ahead turns on, and the driver presses the brake pedal and shifts to neutral. At this time, the Start/Stop system automatically detects: the engine is idling and not in gear; the wheel speed sensor of the locking system shows zero; the electronic battery sensor shows sufficient energy for the next start.

9

1

Share

How to use the L gear in Nissan Sylphy Classic?

The L gear in Nissan Sylphy Classic is a low-speed gear. When going downhill, shifting into the L gear reduces brake usage; when going uphill, shifting into the L gear provides more power for climbing. In this gear, the transmission will stay in 1st gear without shifting up, which can be used in situations like slopes. Relevant information about the Sylphy is as follows: 1. Powertrain: It is equipped with a 1.6L naturally aspirated engine that meets the China VI emission standards, with a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm, paired with a CVT transmission. 2. Smart Features: The new car comes with the latest Nissan-Connect super smart system, featuring an 8-inch HD capacitive touchscreen, including functions like voice control for the vehicle and remote control. Voice control allows basic operations of the vehicle’s online entertainment system, real-time navigation, Bluetooth calls, dashcam, and air conditioning through simple voice commands. The remote monitoring and control function enables users to maintain a comprehensive understanding of the vehicle’s status via a smart app linked to their phone, allowing remote control of door locks, lights & horn, engine, and air conditioning based on specific needs.

3

Share

What is the process for upgrading from a C1 to a D license?

The process for upgrading from a C1 to a D license: Submit an application at the local vehicle management office. Once the application is approved, you need to undergo a medical examination at a hospital. After the examination, bring the medical report, ID card, and application form to the vehicle management office for review. Upon approval, you will be scheduled for an exam. After passing the exam, your original C1 driver's license will be revoked, and a new C1D driver's license will be issued. Requirements for upgrading from a C1 to a D license: The C1 license must have been held for at least one year, and there should be no record of accumulating 12 penalty points in the current scoring cycle or the most recent scoring cycle before application. With the upgraded C1D license, you can drive any two-wheeled or three-wheeled motorcycle as defined by motorcycle regulations, while the original C1 vehicle categories remain unchanged. However, it's important to note that the C1D license only has 12 points per scoring cycle, so you should adhere to traffic rules and drive cautiously.

13

4

Share

What is the technical source of Great Wall's 9AT transmission?

Great Wall's 9AT transmission technology comes from Honeywell E-Creat (Great Wall's powertrain subsidiary), which is the company that developed and manufactured the transmission. Information about Great Wall's 9AT transmission is as follows: Powertrain: 3.0T V6 twin-turbocharged engine + 9AT and 9HAT transmissions. Performance: Reduces turbo lag while maintaining strong power output, shortening the acceleration time from idle to 1500rpm by 0.6 seconds. Information about transmissions is as follows: Transmission: Also known as a gearbox, it is an automotive component used to change the speed and torque from the engine, and can fixedly or stepwise alter the transmission ratio between the output and input shafts. Composition and Classification: The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also having a power take-off mechanism. It can be classified into stepped, continuously variable, and integrated transmissions, featuring functions such as enabling reverse driving, interrupting power transmission, and changing transmission ratios.

11

1

Share

Which model series of Excelle does sgm7153lbaa belong to?

It is a Buick SGM7103LAA1 model. Here are the relevant details: 1. Brand Introduction: The all-new Buick Excelle was officially launched on October 16, 2017. The new car adopts a brand-new family design language and introduces General Motors' new-generation 1.3T/1.0T Ecotec dual-injection turbocharged engines for the first time. In 2018, the Super Connected Edition was launched, equipped with an iteratively upgraded Buick eConnect connectivity technology and a newly designed in-vehicle human-machine interface, supporting cloud-centered connected applications and services. 2. Model Positioning: The Buick Excelle is another masterpiece from the Buick brand, following the new Regal, new LaCrosse, and Enclave, based on the 'global platform, European and American technology.' It integrates the best dynamic genes that the Buick brand has endowed to mid-size cars, bringing a brand-new five-door coupe driving experience to the mid-size car market.

1

2

Share

What engines are used in the domestically produced BMW 1 Series?

Can the Sylphy be used for Didi?

How to Deal with Infiniti Start-Stop System Error?

How to use the L gear in Nissan Sylphy Classic?

What is the process for upgrading from a C1 to a D license?

What is the technical source of Great Wall's 9AT transmission?

Which model series of Excelle does sgm7153lbaa belong to?

How to enable automatic folding of XT6 mirrors when locking the car?

What is the size of the Langdong front windshield?

Does the Trax have four-wheel drive?

What Causes the Passat's Cooling Fan to Keep Running?