What engine model does the Lavida use?

1 Answers
KhloeLee
07/29/25 7:39pm
Lavida's engine model is EA211. More information about the Lavida is as follows: 1. The Lavida comes standard with automatic start-stop, electronic parking brake, auto hold function, and one-touch power windows for all four doors. 2. The Lavida's exterior retains the Volkswagen family's steady style, with a larger front grille than the previous generation. The body incorporates many flat elements, and the side profile is relatively straight and angular, giving it a more business-oriented appearance. 3. The Lavida is Shanghai Volkswagen's first completely independently designed and developed A-segment car and an important model in Volkswagen's global product strategy.
Was this review help?
19
0
Share
More Forum Discussions

How to Use the Mobile Projection Feature on the 2018 Buick Verano?

To use the mobile projection feature on the 2018 Buick Verano, you need to download Baidu CarLife, enable the developer options on your phone, and turn on USB debugging. Below is some relevant information about mobile projection: 1. Concept: A projection phone refers to a mobile device that integrates projection functionality. Given that micro-projection technology has been developing for several years and is relatively stable and mature, even with the addition of this feature, the phone's external appearance remains largely unchanged. 2. Advantages: Projection phones utilize LCOS or DLP technology for micro-projection, integrated into the phone to meet consumer demands for portability, entertainment, and practicality. Since micro-projection technology has been evolving for years and is relatively stable and mature, the addition of this feature does not significantly alter the phone's external design.
4
0
Share

Can the car gear shift lever be modified?

Car gear shift levers cannot be modified as it would cause inconsistency between the vehicle registration certificate and actual vehicle condition, leading to failure in annual inspections. Relevant regulations are as follows: 1. According to Chapter 5, Article 32 of the "Measures for the Registration of Motor Vehicles of the People's Republic of China": For registered motor vehicles, except for the registration items permitted for modification as stipulated in these Measures, other registration items shall not be modified. 2. According to Article 69 of the "Measures for the Registration of Motor Vehicles of the People's Republic of China": Except for the six circumstances allowing vehicle marking modifications specified in these Measures, unauthorized alteration, replacement or modification of non-permitted items will result in confiscation of license plates and vehicle registration certificate according to Article 69, with orders to restore original condition.
17
0
Share

What are feeder roads and main roads?

Feeder roads are the lanes on either side of the main road, serving as auxiliary lanes to facilitate traffic flow. Main roads are the primary lanes for normal traffic. Below is a related introduction to the differences between main roads and feeder roads: 1. Introduction one: Main roads are exclusively for motor vehicles, while feeder roads accommodate a mix of motor vehicles, non-motorized vehicles, and pedestrians. 2. Introduction two: The speed limit on feeder roads must not exceed 60 km/h, whereas main roads allow speeds of 80 km/h or more. 3. Introduction three: Feeder roads are not just for pedestrians or non-motorized vehicles; they connect to numerous intersections. 4. Introduction four: Vehicles on main roads have the right of way, while those on feeder roads must yield.
7
5
Share

What Certificates Are Required for DiDi Driving?

Drivers engaging in ride-hailing services need the following certificates: 'Online Car-hailing Transport Permit' and 'Online Car-hailing Driver's License'. Vehicles used for ride-hailing services must meet the following conditions: 1. Vehicle type: 7-seater or fewer passenger vehicles. 2. Installation requirements: Equipped with a vehicle satellite positioning device with driving record function and an emergency alarm device. 3. Compliance standards: The vehicle's technical performance must meet the safety requirements for operation. Drivers providing ride-hailing services must meet the following conditions: 1. Driving experience: Hold a motor vehicle driver's license for the corresponding vehicle type and have at least 3 years of driving experience. 2. No criminal record: No records of traffic accident crimes, dangerous driving crimes, drug use, drunk driving, and no record of accumulating 12 penalty points in the last 3 consecutive scoring cycles. 3. No adverse records: No records of violent crimes. 4. Other conditions: Other conditions stipulated by the municipal government.
13
3
Share

What to Do When There's a Rustling Sound While Turning the Steering Wheel?

When there's a rustling sound while turning the steering wheel, it's important to promptly inspect the source of the sound for repairs. Here are the details: 1. Sound from the turn signal reset: If the sound occurs while turning the steering wheel with the turn signal on, it might be from the reset mechanism's spring clip, which is normal. 2. Noise from the steering column dust cover: If the noise comes from below the steering wheel, it could be due to the steering column dust cover. Lack of lubrication in the dust cover can cause friction sounds. Applying an appropriate amount of grease under the dust cover can resolve this. 3. Noise from inside the steering wheel: If the sound originates from within the steering wheel, it's likely caused by the airbag clock spring. In this case, the steering wheel airbag clock spring should be removed and greased. If the noise persists, the airbag clock spring may need to be replaced.
12
0
Share

How to Calculate Gear Width?

Gear width calculation method: The tooth width of a gear is usually expressed by the tooth width coefficient. The helical gear coefficient is 0.4, the herringbone gear coefficient ranges from 0.5 to 1.0, the straight bevel gear tooth width = gear coefficient × outer cone distance; the worm gear tooth width = 0.65 × worm pitch diameter. Below is relevant information about gears: 1. By their shape: Gears are classified into cylindrical gears, bevel gears, non-circular gears, racks, and worm gears based on their shape; by tooth line shape, they are divided into spur gears, helical gears, herringbone gears, and curved gears. 2. By the surface where the teeth are located: They are divided into external gears and internal gears; by manufacturing method, they can be classified into cast gears, cut gears, rolled gears, sintered gears, etc.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.