What engine is used in the Weilin V5?

1 Answers
StCassidy
07/29/25 4:20pm
The Weilin V5 is equipped with domestically produced engines, featuring a total of three engine options, with the specific types as follows: 1. 1.8-liter naturally aspirated engine: This is a diesel engine, delivering 126 horsepower and a maximum torque of 271 Nm. It reaches peak power at 4,000 rpm and peak torque at 2,000 rpm. The engine is equipped with direct fuel injection technology and features a cast iron cylinder block and head. It is paired with a 6-speed manual transmission. 2. 1.9-liter turbocharged engine: This is also a diesel engine, producing 126 horsepower and a maximum torque of 271 Nm. It achieves peak power at 4,000 rpm and peak torque at 2,000 rpm. The engine utilizes direct fuel injection technology and has a cast iron cylinder block and head. It is matched with a 6-speed manual transmission. 3. 2.0-liter naturally aspirated engine: This engine delivers 139 horsepower and a maximum torque of 182 Nm. It reaches peak power at 5,750 rpm and peak torque between 4,300 and 4,500 rpm. The engine is equipped with multi-point fuel injection technology and features an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 4AT transmission.
Was this review help?
19
4
Share
More Forum Discussions

Should You Release the Handbrake Before Shifting Gears in an Automatic Car?

For an automatic car, you should shift gears first and then release the handbrake. The specific steps are as follows: 1. Press the brake pedal firmly in an automatic car; 2. Then shift to D gear and release the handbrake; 3. After releasing the brake, you can drive normally. Below is some relevant information about the handbrake: 1. The handbrake is professionally referred to as an auxiliary brake. Its principle differs from that of the main brake, as it uses a steel cable connected to the rear brake shoes to brake the car. Long-term use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, prolonged use will reduce its effectiveness, and the handbrake's travel distance will increase. 2. A return spring is used in conjunction with the handbrake. When the handbrake is engaged, the spring is stretched; when the handbrake is released, the spring returns to its original length. Long-term use of the handbrake can also cause corresponding deformation in the spring.
13
0
Share

What are the hazards of dampness in underground garages to cars?

Dampness in underground garages can breed many bacteria and accelerate the aging of car paint. Especially after summer rains, due to factors such as temperature and the lack of sunlight in underground garages, various invisible bacteria can proliferate inside the vehicle. If parked for a long time, the chassis may be eroded, metal oxidation speeds up, leading to an increased failure rate of chassis components. Methods to improve dampness in underground garages: 1. Regulate temperature differences: The main methods include using geothermal energy to raise the ground temperature of the underground garage, thereby promoting the evaporation of air humidity and alleviating dampness. Another approach is to promptly block air exchange between the underground garage and the outside environment to prevent external moisture from entering. 2. Use desiccants in time: Different moisture-proof methods can be employed in different seasons. For instance, in seasons with less severe humidity, desiccants can be used to keep the underground garage dry and hygienic. 3. Install drainage channels: If the dampness is caused by groundwater, timely installation of drainage channels or sewers can effectively divert groundwater and improve the damp conditions in the underground garage.
4
4
Share

Is Constructive Total Loss Advantageous for Car Owners?

It is neither fair nor reasonable for car owners. Here are the relevant explanations: 1. Constructive Total Loss: This refers to a situation where actual total loss is unavoidable, or when the residual value of the damaged vehicle plus the costs of rescue, arrangement, and repair exceed its actual value, it is deemed as a total loss. Constructive total loss is the opposite of actual total loss. Although the insured vehicle is not completely destroyed and can be repaired, the cost of repair would exceed the actual value of the rescued insured vehicle, making it not worth the effort. 2. Factors: Constructive total loss is not a real total loss, as the damaged car can be repaired. Considering frugality and emotional attachment to the old car, even though the repair cost of the damaged car is higher than the actual value calculated based on depreciation, the owner may still want to repair and continue using it. If the general total loss procedure is followed, where the insurance company deducts the residual value or takes back the damaged car, it is neither fair nor reasonable for the car owner.
12
1
Share

How to Turn on the Headlights of a Volkswagen Golf?

The method to turn on the headlights of a Volkswagen Golf is to rotate the lighting assembly on the left side of the steering wheel to activate the low beams, then toggle the combination switch to turn on the headlights. Car headlights, also known as car front lights or LED daytime running lights, serve as the 'eyes' of a vehicle. They not only contribute to the owner's external image but are also crucial for safe driving at night or in adverse weather conditions. Below is an introduction to the classification of car lights: 1. Headlights - Combined headlights are located at the front of the car, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. 2. Taillights - Combined taillights are positioned at the rear of the car, mainly functioning for illumination and signaling. 3. Turn signals - These lights indicate left or right turns to other road users and are required by regulations to be amber. 4. License plate lights - These lights primarily illuminate the license plate, allowing people to identify the vehicle's license plate in the dark.
14
0
Share

How many digits are in the motor vehicle registration certificate number?

The motor vehicle registration certificate number consists of 17 digits and is located in the upper right corner of the first page of the certificate. The motor vehicle registration certificate is issued together with the vehicle license when registering a vehicle. It has a green cover and is approximately half the size of an A4 sheet of paper. It contains detailed information about the vehicle owner and various vehicle parameters. The registration certificate is primarily used for mortgage, transfer, and ownership change procedures. Below is an introduction to the vehicle registration certificate: Overview: The "Motor Vehicle Registration Certificate" is a necessary property ownership document for the vehicle, kept by the vehicle owner and not carried with the vehicle. It is required to be presented for any vehicle registration procedures such as transfer or ownership change, and records relevant information about the vehicle, serving as the vehicle's household register. Procedure: To apply for a replacement motor vehicle registration certificate, the vehicle owner must bring the vehicle to the vehicle management office. If the vehicle owner is a natural person applying for a replacement "Motor Vehicle Registration Certificate," they must apply in person and cannot delegate the task to others. If the vehicle owner is unable to apply in person due to reasons such as death, being abroad, severe illness or disability, or force majeure, relevant proof must be provided.
2
0
Share

Is It Necessary to Apply Film to a Car's Sunroof?

Generally, it is not recommended to apply film to a car's sunroof for the following reasons: 1. Sunroof glass typically already has UV protection and heat insulation functions. Applying film again can lead to a certain degree of resource waste and may affect the overall quality of the vehicle. For example, after applying film, the increased thickness of the glass might, if not installed properly, cause the sunroof to operate less smoothly. 2. Large panoramic sunroofs have a greater heat absorption area, exposing the interior to two to three times more sunlight than smaller sunroofs, which might necessitate applying film to control the temperature. However, not all panoramic sunroofs are suitable for film application. If the car's sunroof glass is already tinted, it is advisable to avoid colored films to maintain the vehicle's overall aesthetic appeal. 3. Whether to apply film to the vehicle's windows or not should be based on the owner's preference, but it is also recommended to consult with professionals for advice.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.