What engine is used in the Weichai Yingzhi 727?

Where to Place the ETC?

The ETC is generally installed in the upper middle part of the windshield for most vehicles, while for large vehicles like trucks and buses, it is installed in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect microwave signal transmission, the ETC should be installed in the microwave sunroof strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, the vehicle owner needs to provide their valid ID card and the original and photocopy of the vehicle registration certificate. If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is also required, and the vehicle must be registered under the name of an individual aged between 18 and 60. For company vehicles, the required documents are: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the proxy; original vehicle registration certificate; and the vehicle that needs to have ETC installed. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which can reduce the driver's field of vision. If the ETC is installed without considering this, it may increase the driver's blind spot. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas of the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device.

3

Share

Which group does Baocheng BMW belong to?

Baocheng BMW belongs to Shanghai Yongda Automobile Group. Here is some extended information: 1. Shanghai Yongda Automobile Group: Shanghai Yongda Automobile Group Co., Ltd. is a wholly-owned subsidiary of China Yongda Automobiles Service Holdings Limited (a Hong Kong-listed company). Established in 1992, the company has set up over 130 automobile sales and service networks in more than 30 cities across China, including Shanghai, Beijing, Fujian, Shanxi, Zhejiang, Jiangsu, and Hainan. 2. Represented brands: Shanghai Yongda Automobile Group Co., Ltd. represents dozens of internationally renowned automobile brands such as Bentley, Porsche, BMW, Jaguar Land Rover, Audi, Infiniti, Volvo, Cadillac, Buick, Chevrolet, and Volkswagen. It has pioneered a complete automobile sales and service industry chain in the industry, covering driving school, car purchase, car sales, car rental, car repair, and car inspection.

10

5

Share

How Long Can the Vehicle Archives Be Kept After Being Extracted?

After the vehicle archives are extracted, they can be kept for two weeks or one month. Below are the relevant details about vehicle archive extraction: 1. Overview of Archive Extraction: Within three days from the date of acceptance, the vehicle management office will annotate the changes on the motor vehicle registration certificate, retrieve the license plate and vehicle registration certificate, issue a temporary license plate valid for 30 days, and hand over the motor vehicle archives to the vehicle owner. The vehicle owner must apply for the transfer of the motor vehicle to the local vehicle management office at their residence within the validity period of the temporary license plate. 2. Required Documents: Registration certificate, vehicle registration certificate, purchase tax, copy of the original owner's ID card; new owner: (private: original ID card of the new owner. Company: organization code certificate, power of attorney with official seal); compulsory insurance policy.

19

2

Share

Why are the dashboard needles of the Audi A6L always lit?

Audi A6L's certain systems start working or remain continuously connected based on current driving conditions, so the corresponding indicator lights will illuminate. Here is some relevant information about the Audi A6L: 1. Introduction to the Audi A6L: The Audi A6L is the first Audi model to enter the Chinese market. The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the new German A6, serving as the successor to the A6. 2. Interior Introduction: The entire series comes standard with the Audi virtual cockpit, featuring a 10.1-inch display screen inside the car, with an 8.6-inch touchscreen below, and the dashboard uses a 12.3-inch full LCD instrument panel.

15

2

Share

What causes the rattling noise in BMW X1?

BMW X1 rattling noise may be caused by the following reasons: 1. Loose fasteners: Vibration during engine operation causes certain components to loosen, resulting in noise. 2. Deformation or damage of individual parts: Noise caused by deformation or damage of certain components. 3. Improper assembly adjustment or repair: Incorrect assembly adjustment or repair leads to misalignment of component clearances. 4. Excessive clearance: Clearance is an important indicator of automotive assembly quality. When lubrication, temperature, load, and speed are constant, noise becomes more pronounced as clearance increases. Natural wear of certain engine moving parts causes clearance to exceed limits, resulting in noise, such as piston-to-cylinder wall knocking sounds, connecting rod bearing-to-journal impact sounds, etc.

8

1

Share

What is the national standard for vehicle overall dimensions?

There is no specific national standard for vehicle overall dimensions, as long as they comply with the standards of the country's highways, bridges, and railway transportation, and ensure driving safety. Below is relevant information about overall dimensions: 1. Introduction: Overall dimensions include vehicle length, vehicle width, and vehicle height. 2. Vehicle length: Vehicle length is the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. Simply put, it is the distance from the foremost point to the rearmost point along the direction the vehicle moves. 3. Vehicle width: Vehicle width is the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the fixed protruding parts on both sides of the vehicle. Simply put, it is the distance from the leftmost to the rightmost point of the vehicle.

10

2

Share

What engine is used in the Weichai Yingzhi 727?

Where to Place the ETC?

Which group does Baocheng BMW belong to?

How Long Can the Vehicle Archives Be Kept After Being Extracted?

Why are the dashboard needles of the Audi A6L always lit?

What causes the rattling noise in BMW X1?

What is the national standard for vehicle overall dimensions?

Can You Drive with Transmission Oil Leakage?

How to Deal with Paint Chips on a Car?

Why won't my Audi A6L start and the dashboard lights not working?

What is the reason why the fuel gauge of BMW 525 does not rise after being filled up for a long time?