What engine is used in the Trumpchi GA6?

Which Type of Transmission Offers Better Overall Performance?

MT transmissions perform well overall, but they are not automatic and have poorer shift comfort. Theoretically, the best is the dual MT clutch DCT, which retains the advantages of MT transmissions while shifting like a dry DCT, with no drawbacks, making it the theoretically best DCT transmission. In the past, dry DCTs couldn't handle high torque, and when clutch reliability issues weren't a concern, they could be called the "endpoint of transmissions." Theoretically, dual AMT-style DCTs can handle high torque, and the dual MT clutches used are highly reliable, with overall performance surpassing the "endpoint of transmissions." The dual AMT-style dual-clutch solves the issues of low-speed shift jerkiness, vibration, and noise in DCTs. The reason for jerkiness in DCTs is insufficient clutch slip power and slow clutch engagement speed—neither of which is an issue for MT clutches, so dual AMT shifts can be smooth. DCT vibration occurs because the drivetrain's resonant frequency isn't low enough, which is due to the clutch's secondary mass being insufficient. The combined mass of the two MT clutches in a dual AMT is large, resulting in a sufficiently low drivetrain resonant frequency, preventing vibration during startup and low RPMs. DCT noise is caused by synchronizer gear clash, as wet clutches don't fully disengage, making synchronizer clash more likely. The dry MT clutches in dual AMTs fully disengage, preventing synchronizer noise, and the normally closed MT clutches avoid clutch collision noise. The dual AMT-style dual-clutch has no jerkiness, vibration, or noise and can handle high torque, theoretically making it the "endpoint of transmissions."

4

Share

What Type of Engine Oil Should Be Used for Vehicles with a Particulate Filter?

Vehicles equipped with a particulate filter require 0W20 engine oil. This type of oil helps prevent the production of soot particles after combustion, which could otherwise clog the particulate filter. In simpler terms, 0W20 oil contains almost no additives. During engine operation, oil vapors can enter the combustion chamber through the crankcase ventilation port. After combustion, these vapors produce carbon soot particles, which can be regenerated by the particulate filter installed behind the three-way catalytic converter. To meet the C6 emission regulations, certain engine models require an OPF (short for particulate filter) in the exhaust system to collect particulate matter during emissions, ensuring compliance with regulatory requirements. The OPF is installed behind the catalytic converter and can filter out 90% of the particulate matter from the exhaust gases. Method for adding engine oil: After turning off the engine and waiting for about ten minutes, pull out the oil dipstick and wipe the oil traces clean with a cloth. Reinsert the dipstick into the dipstick tube, then pull it out again to check the oil level. Under normal conditions, the oil level should be between the upper and lower marks on the dipstick, slightly above the middle. If the oil level is below the lower mark, it indicates insufficient oil, and you should add oil immediately. While adding oil, continuously pull out the dipstick to monitor the oil level. The engine oil filler cap is located near the engine and is marked with an oil can symbol. To open the cap, slowly unscrew it counterclockwise. When performing routine oil changes or other maintenance tasks, use the oil on the dipstick to lubricate the cap opening before reattaching it. Finally, tighten the cap securely in the clockwise direction.

12

5

Share

Why does the car idle unstable after driving for a while?

The reasons for unstable idle after driving for a while are: 1. The air-fuel mixture ratio in the car engine compartment is inappropriate; 2. After prolonged use, the ignition coil of the spark plug ages, and the high-voltage line of the spark plug ages and leaks, which affects the ignition ability; 3. Carbon deposits form on the valves and intake ducts in the engine. Carbon deposits can absorb a large amount of fuel, and part of the sprayed fuel-air mixture is absorbed by the carbon deposits, reducing the car's power; 4. The water temperature sensor fails. The solutions for unstable idle after driving for a while are: 1. Replace the spark plug; 2. Clean the valves and intake ducts; 3. Check the water temperature sensor.

12

1

Share

How many kilometers should a new car run at high speed?

New cars should run about 10 kilometers at high speed. Pay attention to gear shifting, speed control, and clutch usage during high-speed driving. Precautions for using a new car include: 1. Maintain smooth starts, avoid sudden acceleration, and do not let the engine speed get too high; 2. Before starting, the water temperature should reach above 50 degrees Celsius, start in a low gear, and shift to a high gear after 1 kilometer; 3. Shift gears promptly while driving, avoid using one gear for a long time, and do not use a high gear at low speed or a low gear at high speed. A new car is a vehicle that has just left the factory and passed road tests, with a factory time of no more than six months.

4

2

Share

What are the types of independent suspension?

The types of independent suspension include: 1. Double-wishbone independent suspension; 2. MacPherson suspension; 3. Inclined single-arm independent suspension. Independent suspension refers to a system where each wheel is individually suspended under the frame or body via an elastic suspension system. Suspension is the general term for all force-transmitting connection devices between the vehicle's frame and the axle or wheels. The functions of the suspension are: 1. To provide cushioning when the vehicle passes over uneven ground; 2. To ensure that the wheels move within a fixed angle, maintaining steering stability; 3. To support the weight of the wheels; 4. To maintain good contact between the wheels and the ground, ensuring that the driving force and braking force generated between the wheels and the ground are accurately transmitted to the vehicle body.

5

1

Share

How to Distinguish Volkswagen Series Cars?

Distinguishing Volkswagen series cars can be done by observing the exterior or the English text at the rear of the vehicle. Volkswagen models include: Lavida, Lamando, Passat, Sagitar, Golf, etc. Taking the Golf 2021 model as an example, its body dimensions are: length 4296mm, width 1788mm, height 1471mm, wheelbase 2636mm, fuel tank capacity 51l, and trunk capacity 380l. The Golf 2021 model is equipped with a 1.2t turbocharged engine, with a maximum power of 85kw and a maximum torque of 200nm. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.

2

3

Share

What engine is used in the Trumpchi GA6?

Which Type of Transmission Offers Better Overall Performance?

What Type of Engine Oil Should Be Used for Vehicles with a Particulate Filter?

Why does the car idle unstable after driving for a while?

How many kilometers should a new car run at high speed?

What are the types of independent suspension?

How to Distinguish Volkswagen Series Cars?

What to Do When the Tire Pressure Monitoring Light Comes On?

Do You Have to Register Your Car Where You Buy It?

What is the function of a roll cage?

How many kilometers can a Sagitar run on a full tank of gas?