···
Log in / Register

What engine is used in the Roewe RX5 MAX?

4 Answers
DelPaige
07/25/25 1:24pm
The Roewe RX5 MAX uses different engines depending on the model. The 2019 Roewe RX5 MAX 300GTI is equipped with a 1.5-liter inline 4-cylinder turbocharged engine, while the 400GTI uses a 2.0-liter inline 4-cylinder turbocharged engine. Below are the details about the engines of the Roewe RX5 MAX: 1. The 300GTI model is powered by a 1.5-liter inline 4-cylinder turbocharged engine, paired with either a 6-speed manual or 6-speed automatic transmission. It delivers a maximum power of 127KW, maximum horsepower of 173PS, and maximum torque of 275Nm. The engine reaches its peak power at 5600rpm and peak torque between 1750-4000rpm. All models feature direct fuel injection. 2. The 400GTI model comes with a 2.0-liter inline 4-cylinder turbocharged engine, mated to a 6-speed dual-clutch transmission. It produces a maximum power of 170KW, maximum horsepower of 231PS, and maximum torque of 370Nm. The engine achieves its peak power at 5300rpm and peak torque between 2000-4000rpm. All models utilize direct fuel injection.
Was this review help?
10
3
Share
RowanFitz
08/11/25 2:16pm
I've been driving the Roewe RX5 MAX for several years, and its engine is truly impressive. The most popular model is the 1.5T turbocharged variant, part of SAIC's own Blue Core series, delivering 127 kW of power and 250 Nm of torque, making it easy to start and fuel-efficient, with an average city fuel consumption of less than 7 liters. The high-end version also features a 2.0T engine with 170 kW of power, offering an exceptionally smooth and powerful driving experience, especially when overtaking on highways. Both engines comply with the China VI emission standards, require simple daily maintenance, and only need regular oil changes. The turbo noise control is also quite good. I find the overall performance well-balanced, providing a smooth and responsive drive. Compared to older Roewe models, fuel consumption has decreased by 15%, making it a high-value choice among family SUVs.
Was this review help?
19
3
Share
Expand All
LeMiguel
09/27/25 7:49am
As an average car owner, I'm quite satisfied with the Roewe RX5 MAX 1.5T version. The engine responds quickly with smooth acceleration, making city commutes effortless and hill climbing easy. The average fuel consumption of 6.5 liters per 100 kilometers saves me a lot on gas. It handles long-distance drives well too, with sufficient power for various road conditions. I've heard some car enthusiasts bought the 2.0T version for stronger performance, but this 1.5T is adequate for my needs. Maintenance is straightforward with routine checks and frequent oil changes, keeping costs low. Overall, it's a practical and reliable choice for daily family transportation.
Was this review help?
2
2
Share
Expand All
LailaRose
11/11/25 3:01am
My family uses the Roewe RX5 MAX, valuing its fuel economy. The engine is a 1.5T turbocharged model, consuming 6-7 liters per 100km in daily driving, which is cost-effective. The reliability is decent; after two years of use, there have been no major issues, just simple maintenance like oil changes. Compared to other brands, this engine is quieter, offering better comfort for city driving, making it quite suitable for working-class families.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

What are the effects of severe tire wear?

Here are the impacts of severe tire wear on a vehicle: 1. Reduced traction. When the tread is uniformly worn and the patterns are completely gone, it indicates the tire has reached the end of its lifespan and must be replaced. The tread patterns also play a crucial role in dispersing water on the road surface, which is essential for maintaining traction. If the wear has reached the standard depth of the tire tread, replacement is necessary. 2. Overinflation. If the center area of the tire's contact patch shows severe wear, it's important to check the accuracy of the pressure gauge and adjust the pressure accordingly. Note that overinflation is only required during high-speed driving or heavy-load driving. 3. Underinflation. If significant wear is observed on the outer edges of the tire when viewed along the direction of travel, it indicates insufficient pressure. Underinflated tires are particularly problematic for driving in rainy conditions, as traction will be noticeably reduced.
4
0
Share

What are the characteristics of selecting lubricants for enclosed gears?

Enclosed gear oils emphasize extreme pressure anti-wear properties, oxidation stability, etc. Gear classification: Gears are classified into open and enclosed types, and gear oils should be used accordingly. Enclosed gears are installed in precisely machined and tightly sealed housings; open gears have no dust covers or casings, with the gears fully exposed to the environment. Differences in gear oils: Enclosed gear oils are used in enclosed gearboxes, while gear oils are used in gearboxes without enclosures or semi-enclosed gearboxes; enclosed gear oils are classified by their 40°C kinematic viscosity grades, whereas open gear oils are classified by their 100°C kinematic viscosity grades; enclosed gear oils particularly emphasize requirements for extreme pressure anti-wear properties and oxidation stability; open gear oils require good adhesion and cohesion properties, which enclosed gear oils lack.
6
0
Share

What is the actual fuel consumption of the Odyssey?

The actual fuel consumption of the Odyssey is 7.8~9L per 100 kilometers. Below is an introduction to the Odyssey and fuel consumption: 1. Odyssey: The Odyssey is a vehicle launched by Honda, which went on sale nationwide in January 2007. It is equipped with a satellite navigation system, features an 8-inch large display screen with voice guidance, and utilizes variable valve timing. 2. Fuel consumption measurement: First, wait until a full tank of gasoline is completely used up, that is, when the fuel tank warning light comes on, go to the gas station. After refilling the tank, record how many liters of gasoline you added. Then, note down the current mileage number. When this tank of gasoline is used up again and the warning light comes on, go back to the gas station and record the mileage number again. This way, you can determine "how many kilometers you drove on one tank of gasoline." The fuel consumption calculated this way is the actual fuel consumption.
12
1
Share

What is the shrinkage rate of ABS?

ABS has a normal shrinkage rate of 0.45%. Introduction to ABS: ABS material is a graft copolymer composed of three monomers: acrylonitrile, 1,3-butadiene, and styrene. ABS is not affected by water, inorganic salts, alkalis, and various acids, but it can dissolve in ketones, aldehydes, and chlorinated hydrocarbons. Exposure to glacial acetic acid or vegetable oil can cause stress cracking. ABS has poor weather resistance and tends to degrade under ultraviolet light; after six months outdoors, its impact strength decreases by half. Introduction to shrinkage rate: Different raw materials have different shrinkage rates. Generally, fibers with high hygroscopicity will expand in diameter and shorten in length when soaked in water, resulting in a higher shrinkage rate. For example, some viscose fibers have a water absorption rate of up to 13%, while synthetic fiber fabrics with low hygroscopicity have a smaller shrinkage rate. Density also affects shrinkage rate. If the warp and weft densities are similar, their shrinkage rates will be close. Fabrics with higher warp density will have greater warp shrinkage, and conversely, fabrics with higher weft density will have greater weft shrinkage.
6
5
Share

What is the volume of the urea tank in liters?

20kg urea tank is 15 liters. Function of automotive urea: Automotive urea reduces nitrogen oxides in vehicle emissions, lowering the level of exhaust pollution. Automotive urea solution is a colorless, transparent, and clear liquid with a concentration between 31.8 and 33.2. Currently used automotive urea solutions are generally composed of 32.5% high-purity urea and 67.5% deionized water. Automotive urea solution is key to reducing pollutant emissions from diesel vehicles. It is a urea-based chemical reactant, made by mixing high-purity urea with deionized water, forming a 32.5% concentration solution. Applying automotive urea solution in the SCR (Selective Catalytic Reduction) system is crucial for achieving engine exhaust emissions that meet China IV and higher emission standards. Automotive urea: Automotive urea, also known as Diesel Exhaust Fluid (DEF), is essential for reducing nitrogen oxides in vehicle exhaust and lowering pollutant emissions from diesel vehicles. It is also a necessary consumable in SCR (Selective Catalytic Reduction) technology.
17
3
Share

What does 'apply for car removal 5 times' mean?

It refers to the traffic management service '12123' providing five car removal application services per month, with each vehicle owner allowed to initiate a maximum of 5 car removal requests monthly. Introduction to '12123': The mobile application '12123' is a client launched by the Internet-based Comprehensive Traffic Safety Service Management Platform, with technical support provided by the Traffic Management Research Institute of the Ministry of Public Security. The app allows users to handle traffic violations related to motor vehicle driving licenses, schedule and process services related to driving licenses and motor vehicles. The operational process is relatively simplified, saving users time. One-click car removal function: The '12123' mobile app also features a convenient one-click car removal service. Upon opening the app, the one-click car removal option is visible on the homepage. After clicking this option, the system will locate your position, then prompt you to fill in accurate information about the obstructing vehicle and take and upload photos of the scene.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.