What engine is used in the Jimny?

2 Answers
DiAmy
07/28/25 10:52pm
The Suzuki Jimny is equipped with a 1.5L engine, model K15B-1.5L-NA. Additionally, there is a 0.6T turbocharged engine, but this variant has not been introduced to the Chinese automotive market. Below is additional information: 1. In terms of power, this 1.5L engine delivers a maximum power output of 75kW and a maximum torque of 130Nm. The engine features a longitudinal layout, which is one of the most distinctive aspects of the Jimny. From both the interior and exterior design perspectives, the vehicle leans towards an off-road style. 2. The Suzuki Jimny is available in two models: the K-Car standard version and the SIERRA version, equipped with the 1.5L engine and 0.6T engine respectively. For transmission, it is paired with a 5-speed manual gearbox and a 4-speed automatic transmission, featuring the latest full-time four-wheel-drive system. The mechanical transfer case offers three mode switches: 2H, 4H, and 4L.
Was this review help?
12
4
Share
DelHope
08/12/25 3:20am
I often drive the Jimny off-road, which is equipped with a 1.5-liter gasoline engine, model K15B, producing approximately 100 horsepower. It has strong low-end torque, making it very capable when climbing slopes or navigating muddy roads. Its compact and lightweight design helps save fuel, with my average city driving consumption at 7 liters and highway driving as low as 6.5 liters. The engine uses multi-point fuel injection technology, optimizing combustion efficiency and meeting the China VI emission standards, which is good for the environment. When off-roading, pay attention to heat dissipation as prolonged operation can cause overheating. I recommend cleaning engine dust after each run and changing the oil regularly to maintain good condition. I've taken several long trips, and the noise control is excellent, providing a smooth ride, making it suitable for personal adventure journeys.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Does the Magotan 330 Luxury have a particulate filter?

The Magotan 330 Luxury meets the China VI emission standard. It does not have a particulate filter. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, which captures particulate emissions before they enter the atmosphere. It can reduce soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate trap through a dedicated pipeline. Inside, a densely arranged bag-type filter captures the carbon particles on a filter made of metal fiber felt. When the accumulation of particles reaches a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check if the Magotan 330 Luxury has a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, carefully review the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Check the label on the oil cap. If the oil cap clearly indicates the use of 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Look behind the three-way catalytic converter on the exhaust pipe for an additional cylindrical section. If present, that is the particulate filter.
2
0
Share

What Causes the Engine Warning Light to Illuminate in the New 3 Series?

The BMW 3 Series engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel or engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Causes include spark plug failure, ignition coil malfunction, fuel pump issues, or clogged fuel lines. Turbocharging problems: Issues with the intake boost piping or turbocharger can trigger the engine light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black exhaust smoke. Intake system issues: Air intake problems may cause engine pipe blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can lead to intake complications. Exhaust system faults: Exhaust problems can also activate the engine light. Common causes include rear oxygen sensor failure, catalytic converter issues, or exhaust camshaft and bearing faults. Leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may damage the catalytic converter. Anti-theft system malfunction: If the electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light illuminates, follow these steps: First, check if the engine operates normally. If there's noticeable shaking, black smoke emission, or similar issues, avoid restarting the engine. Note: Never restart if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the 'ON' position (without depressing the clutch). The vehicle will initiate a self-check upon power-up. Observe whether the warning light turns off after 5-10 seconds. If the light persists, visit a service center promptly. Technicians can use diagnostic tools to retrieve trouble codes, identify the specific issue, and perform targeted repairs.
8
3
Share

Will driving straight in a left-turn lane be captured by cameras?

Driving straight from a left-turn lane will be captured by cameras, and the probability of being caught is very high. If you drive straight when both the left-turn and straight signals are green, the chance of being caught is relatively low, but if captured, you will be penalized for not driving in the designated direction, resulting in a fine and a deduction of 2 points. If you drive straight when the straight signal is green but the left-turn signal is red, the probability of being caught is very high, and it is usually treated as running a red light, leading to a fine and a deduction of 6 points. Below are some common traffic violations: 1. Running a red light: This is the most common traffic violation. Since the new traffic regulations were introduced, running a red light results in an immediate deduction of 6 points. 2. Driving without a license: If a driver continues to drive while their license is suspended, they will be fined and detained for 15 days. Those driving without a license or with a revoked license will also be detained for 15 days and fined. 3. Overloading or overcrowding: For passenger vehicles exceeding the rated capacity by less than 20% or freight vehicles exceeding the rated load by less than 30%, a fine will be imposed. If the excess is 20% or more for passenger vehicles or 30% or more for freight vehicles, a heavier fine will be imposed. 4. Drunk driving: Driving under the influence of alcohol will result in a 3-month suspension of the driver's license and a fine. Driving a commercial vehicle under the influence will also lead to a 3-month suspension and a fine. 5. Speeding: If a vehicle exceeds the speed limit by 50% or more, the driver will face a fine and revocation of their driver's license.
3
1
Share

What is the engine code for the BMW M3's V8?

The engine code for the BMW M3's V8 is S65B40. This engine was transplanted from the BMW M5 and is the first V8 engine in the history of the BMW M3. The S65B40 engine incorporates F1 racing engine technology and features BMW's Double VANOS and Valvetronic technologies. The BMW M3's design continues BMW's signature sharp lines and muscular appearance, fully showcasing the personalized style of the BMW 3 Series. The elongated hood, dynamic long wheelbase, noticeably rear-set cabin, and short front overhang clearly demonstrate the BMW 3 Series Coupe's more sporty inclination compared to the standard 3 Series.
4
0
Share

Does the BMW M2 have a carbon fiber strut brace?

BMW M2 is equipped with a carbon fiber strut brace as part of the M Performance carbon fiber kit. After installing this kit, the M2 exhibits a strong racing aesthetic, with the most noticeable changes being the front splitter and rear spoiler. Carbon fiber materials are also used on the outer trim of the front grille, teardrop-shaped mirrors, and other areas. Compared to the standard M2 Competition, the M2 Competition Signature Edition features further personalized exterior upgrades, including exclusive M2 Competition badging, authentic racing styling, 19-inch alloy wheels with striking visual impact, black high-gloss mirror caps, and an M rear spoiler, all of which enhance the sporty character.
14
3
Share

What transmission does the BMW M2 use?

The BMW M2 uses a 7-speed dual-clutch transmission. The dual-clutch transmission features high transmission efficiency and fast shifting speed, making it very suitable for performance vehicles. The BMW M2 is equipped with a 3.0-liter inline six-cylinder turbocharged engine codenamed N55, which delivers a maximum power of 272kW, a maximum torque of 465Nm, and reaches its peak power at 6,500 rpm. The BMW M2 is an entry-level sports car built on the F21 platform. Its exaggerated front fascia draws inspiration from the ConnectedDrive concept car's styling, while its low-slung body design better meets aerodynamic requirements, helping to reduce fuel consumption and wind resistance.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.