What engine is used in the JAC Refine S4?

What is the method for replacing the belt on a Peugeot 3008?

Here is the method for replacing the belt on a Peugeot 3008: 1. First, ensure the first cylinder piston is at the top dead center position, and align the notch on the outer edge of the crankshaft timing belt pulley with the raised "" mark on the pulley housing. 2. Ensure the pulley housing and all transmission belt pulleys are clean, free of oil and water. If necessary, clean them with a clean white cloth. 3. Use a specialized tool to secure the fuel injection pump timing belt pulley, then tighten the nut to the specified torque. Assemble the belt transition wheel assembly and tighten the hexagonal flange positioning bolt connecting the belt transition wheel assembly to the specified 110±10 N·m. 4. Use an M8 process positioning bolt to simultaneously position the camshaft timing belt pulley and the fuel injection pump timing belt pulley at the corresponding threaded hole positions on the pulley housing. Assembly marks have been made on the pulleys; the assembly line process is changed to align with these marks. 5. Fit the timing belt assembly in the specified order (i.e., 1. crankshaft timing belt pulley—2. camshaft timing belt pulley—3. belt transition pulley—4. fuel injection pump timing belt pulley) onto each transmission belt pulley, ensuring the marks on the belt align with those on the pulleys. The timing arrow on the belt should match the engine's rotation direction (clockwise), and the belt's outer edge should be flush with the camshaft's outer edge (maintaining a distance of 0~0.5mm between the belt's outer edge and the camshaft pulley's outer edge). Ensure the belt's end faces are in the same plane. 6. Assemble the tensioner wheel assembly onto the pulley housing and secure it with a hexagonal flange positioning bolt, but do not tighten it yet, ensuring the tensioner wheel assembly can move freely. After assembly, ensure no multi-tooth or misaligned tooth phenomena occur between the camshaft timing belt pulley and the fuel injection pump timing belt pulley, or between the crankshaft pulley and the camshaft pulley. During assembly, absolutely avoid bending the timing belt assembly.

20

3

Share

How to Open and Close Active Grille Shutters?

Most grilles are fixed in an open position to allow air intake for the engine and utilize external airflow to cool the engine. Active grille shutters can automatically adjust the opening and closing of the grille based on engine temperature and vehicle speed, requiring no manual control from the driver.

14

4

Share

How to Tell the Difference Between Lead-Acid Batteries and Lithium Batteries?

Generally, lead-acid battery packs are larger in size, while lithium batteries are relatively lighter and more compact, making them easier to ride with and transport. It's hard to define which one is better, but consumers can choose high-quality batteries produced by reputable manufacturers based on their actual needs.

20

0

Share

How to Remove Excess Refrigerant Oil?

Sit upright, hold the steering wheel with both hands, and focus your eyes on the centerline of the distant lane. Align the angle between the car's front hood and the lower edge of the windshield with the left lane boundary line to ensure proper alignment.

9

1

Share

How Often Should a Car Be Maintained and How to Maintain It?

Generally, fully synthetic engine oil should be replaced every 10,000 kilometers or once a year. Generally, semi-synthetic engine oil should be replaced every 7,500 kilometers or every 7-8 months. Generally, mineral engine oil should be replaced every 5,000 kilometers or every 6 months.

2

0

Share

How to Repair Bumper Scratches?

For more severe scratches, generally the bumper, rearview mirrors, and some cars' wheel arch parts are made of engineering plastic, which won't rust. Whether to repaint or not depends on the owner's preference. You can gently apply toothpaste to minor scratches, then use a soft cotton cloth to wipe counterclockwise. This not only reduces the scratches but also prevents air from corroding the damaged paint.

8

4

Share

What engine is used in the JAC Refine S4?

What is the method for replacing the belt on a Peugeot 3008?

How to Open and Close Active Grille Shutters?

How to Tell the Difference Between Lead-Acid Batteries and Lithium Batteries?

How to Remove Excess Refrigerant Oil?

How Often Should a Car Be Maintained and How to Maintain It?

How to Repair Bumper Scratches?

What is the Scrap Standard for the Service Life of Sedans?

Is the rearview mirror of the Boyue automatic?

How Can Drivers Ensure Safety When Driving Through Waterlogged Roads?

Can You Use 95 Octane Gasoline in a Car That Requires 92 Octane?