What engine is used in the JAC Jiayue A5?

How to Control Speed When Driving an Automatic Car?

Methods to control speed when driving an automatic car include: 1. Shift into a low gear and use the engine to control speed; 2. Gently press the accelerator; 3. Apply the brakes. The correct method to park an automatic car is to shift the gear to N (Neutral) after the car comes to a complete stop, engage the handbrake and turn off the engine, then shift the gear to P (Park). The function of an automatic transmission is to utilize planetary gear mechanisms for gear shifting. It can automatically shift gears based on the degree of accelerator pedal pressure and changes in vehicle speed, allowing the driver to simply control the speed by operating the accelerator pedal. The gear positions on an automatic car are: 1. P (Park) for parking and starting; 2. R (Reverse) for reversing; N (Neutral) for no gear engagement; 3. D (Drive) for forward movement, also known as the driving gear; 4. S (Sport) for sport mode; 5. L (Low) for low gear.

16

4

Share

What Causes Engine Shaking During the Break-in Period of a New Car?

During the break-in period of a new car, engine shaking can be caused by several factors: incorrect installation of the engine's rubber mounts, leading to distortion; excessive carbon buildup on the spark plugs, resulting in engine vibration; or the accumulation of deposits in the fuel system. Additionally, failure to perform timely maintenance, such as oil changes, during the break-in period can contribute to this issue. Extended Information: Solutions for Engine Shaking: 1. Clean Carbon Deposits Promptly: If the throttle body or fuel injectors are malfunctioning—such as a dirty throttle body or excessive carbon buildup on the injectors—gasoline may be absorbed by the deposits, making the vehicle hard to start. Regular cleaning of carbon deposits is essential to avoid unnecessary wear. 2. Inspect the Condition of Spark Plugs: Faulty spark plugs can disrupt the ignition system. Check for excessive carbon buildup and replace them if necessary. 3. Verify Fuel Pressure: Unstable fuel pump pressure can also cause engine shaking. Inspect the fuel pressure and replace any faulty components promptly.

5

4

Share

What Vehicles Are Suitable for 15W-40 Engine Oil?

15W-40 engine oil with a viscosity of 40 is more suitable for European and German cars, but only if the ambient temperature is not too low. Below is more information about 15W-40 engine oil: 1. For 15W-40 engine oil, the number before the W represents the oil's fluidity. The smaller the number, the better the fluidity, and it also indicates the lowest temperature at which the oil can be used. For example, 15W means the oil can be used at temperatures above -20°C; W stands for Winter. 2. The number after the W represents the oil's viscosity. The larger the number, the higher the viscosity, the better the high-temperature protection performance, and the greater the resistance. Therefore, higher viscosity does not always mean better. Below is more information about engine oil viscosity: 1. Higher viscosity oil provides better sealing but consumes more fuel. 2. At idle, higher viscosity oil results in lower noise. 3. While driving, higher viscosity oil produces higher noise. 4. Lower viscosity oil saves fuel.

4

3

Share

What is the starting current of a 12V car?

The maximum current output by the battery when starting the engine of a car using a 12V battery is 550A. The battery is a crucial component of a car. Without it, the car cannot operate normally. When the engine is not started, the battery supplies power to all the electronic devices in the car, and it is also responsible for starting the engine. A battery refers to a type of battery that can be recharged and reused after discharge. There are lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries, among others. The positive electrode of a lead-acid battery is lead dioxide, the negative electrode is lead, and the electrolyte is a dilute sulfuric acid solution. During discharge (use), the positive and negative electrodes react with sulfuric acid to form lead sulfate. When the concentration of the sulfuric acid solution drops to a certain level, the battery must be recharged. Using an external power source to recharge the battery can restore the electrodes and solution to their original state, allowing the battery to be used again after charging. Battery usage precautions: Be sure not to use the electronic devices in the car for extended periods when the engine is not started, and avoid turning on power-consuming devices simultaneously when starting the engine.

12

4

Share

What is the difference between CarPlay and Bluetooth?

The difference between CarPlay and Bluetooth lies in their usage methods. Below are the distinctions and usage instructions: The differences between CarPlay and Bluetooth include: CarPlay can project the phone screen onto the car's central display, while Bluetooth cannot. CarPlay can be used simultaneously with the radio without audio interference, whereas Bluetooth cannot be used with the radio as the audio channels conflict. Bluetooth is a wireless communication method and is prone to interference, while CarPlay uses wired communication and is less susceptible to interference. The CarPlay system runs on Apple's iOS and is a built-in feature of the iPhone. Usage Instructions: First, enable the "Hey Siri" setting on the iPhone. Then, use Siri to perform tasks such as voice navigation, making calls, sending messages, and playing music. Open the iPhone's Settings, go to General, and select CarPlay. Launch the CarPlay application on the car's display, and connect the iPhone via a USB cable or Bluetooth. Once connected, the car's display will mirror the iPhone's content.

3

4

Share

Where is the BMW car Bluetooth and how to turn it on?

BMW car Bluetooth is located on the main screen of the car, simply click the Bluetooth icon to turn it on. BMW's business began with the production of aircraft engines, so many people believe the logo represents a rotating propeller, but this is not the case. The blue and white logo is the state emblem of Bavaria, the company's home, serving as a reminder of BMW's pure Bavarian heritage. Below is an introduction to BMW cars: 1. Logo Meaning: B.M.W. stands for Bavarian Motor Works, and the colors and design of the logo are derived from the state emblem of Bavaria, where BMW is headquartered. 2. Brand Honors: On December 18, 2018, the "2018 World's 500 Most Influential Brands" list compiled by the World Brand Laboratory was announced, with BMW ranking 16th.

8

4

Share

What engine is used in the JAC Jiayue A5?

How to Control Speed When Driving an Automatic Car?

What Causes Engine Shaking During the Break-in Period of a New Car?

What Vehicles Are Suitable for 15W-40 Engine Oil?

What is the starting current of a 12V car?

What is the difference between CarPlay and Bluetooth?

Where is the BMW car Bluetooth and how to turn it on?

What Causes a Car Horn to Sometimes Work and Sometimes Not?

What are the production capacities of BYD DMi?

Why Did Mercedes-Benz Discontinue Run-Flat Tires?

How to Properly Use the Clutch for Beginners?