What engine is used in the imported Peugeot 207?

1 Answers
DeVincent
07/29/25 9:23pm
The imported Peugeot 207 is equipped with two types of engines: a 1.6L naturally aspirated engine and a 1.6L turbocharged engine. More details about the engines of the imported Peugeot 207 are as follows: 1. The 1.6L naturally aspirated engine delivers 120 horsepower and a maximum torque of 160 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4250 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 4-speed automatic transmission. 2. The 1.6L turbocharged engine produces 150 horsepower and a maximum torque of 240 Nm. This engine achieves its maximum power at 5800 rpm and its maximum torque between 1400 to 3500 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is matched with a 6-speed manual transmission.
Was this review help?
2
2
Share
More Forum Discussions

Where is the cigarette lighter fuse located in the Haval H6?

The cigarette lighter fuse of the Haval H6 is located in the cabin fuse box, positioned on the left side of the steering wheel. The Haval H6 has two fuse boxes: one is responsible for the safety of external electrical components, such as the ECU, windshield washer fluid, lights, horn, ABS, etc., and is located in the engine compartment; the other is responsible for the normal operation of internal electrical components, such as the cigarette lighter, power windows, electric seats, and airbags, and is generally located on the left side of the steering wheel. Below is an introduction to fuses: 1. A fuse, officially known as a "circuit breaker," serves a similar purpose in a car as it does at home. It melts when the circuit current is abnormal and exceeds its rated current, acting as a protective barrier for the circuit. Automotive fuses can be broadly divided into two types: fast-blow fuses and slow-blow fuses. 2. The interior light fuse of the Haval H6 is located in the fuse box. Open the upper right section of the engine compartment to see the fuse box. Opening the box will reveal the interior light fuse, which can be found by referring to the table inside the fuse box. 3. The fuse box of the Great Wall Haval H6 is located on the right side of the engine compartment, where a large box can be seen—that is the fuse box.
3
3
Share

What Causes Loud Engine Noise During Acceleration?

Reasons for loud engine noise in cars: 1. Engine oil: If the viscosity of the vehicle's engine oil is too high, it can easily cause operational issues in the engine, reducing lubrication effectiveness and leading to louder engine noise. 2. Belt: Check if the belt is loose. A loose belt can sometimes cause increased noise in the engine compartment. 3. Water temperature: Excessively high water temperature can also cause loud engine noise. Check if the temperature gauge is normal and if there is any smoke coming from the engine compartment. It's crucial to replace the coolant before winter. 4. Idle speed: If the noise feels particularly loud during idle and the idle speed is higher than usual, it may be necessary to clean the throttle body, intake tract, and fuel injectors, especially the throttle body. 5. Sound insulation: If the engine sounds normal from outside but feels noisy inside the car, it indicates poor sound insulation. Check the vehicle's sealing strips for signs of aging. Alternatively, improving the vehicle's sealing effectiveness and then testing the noise level is recommended.
6
4
Share

Where is the high beam relay on the Cruze?

The high beam relay on the Cruze is located inside the engine compartment fuse box. After disassembling the fuse box, you will find a circuit board inside, and the black relay on the circuit board is the one. Below are the functions of a relay: 1. Expand control range: A multi-contact relay can switch, disconnect, or connect multiple circuits simultaneously in different contact group forms when the control signal reaches a certain value. 2. Amplification: Sensitive relays and intermediate relays can control high-power circuits with a very small control input. 3. Signal integration: When multiple control signals are input into a multi-winding relay in a specified form, they can be compared and integrated to achieve the desired control effect. 4. Automation, remote control, and monitoring: For example, relays in automatic devices can form program control circuits together with other electrical components to achieve automated operation.
1
2
Share

Why does the car engine shake when the air conditioner is turned on?

The most common reason for engine shaking when the air conditioner is turned on is a dirty throttle valve, which affects the engine. Turning on the air conditioner at this time increases the engine idle load, leading to steering wheel vibration. Therefore, cleaning the throttle valve can prevent this issue. Below is an introduction to the throttle valve: 1. The throttle valve is a controllable valve that regulates air intake into the engine. After air enters the intake pipe, it mixes with gasoline to form a combustible mixture for combustion. The throttle valve is one of the most critical components in an EFI (Electronic Fuel Injection) engine system. Its upper part connects to the air filter, and the lower part connects to the engine block, functioning as the throat of the car engine.
13
4
Share

Where is the camshaft position actuator of the 2009 Geely Emgrand located?

The camshaft position actuator of the 2009 Geely Emgrand is located on the right front side of the engine cylinder. The camshaft position sensor is a sensing device, also known as a synchronization signal sensor, which serves as a cylinder identification and positioning device. It inputs the camshaft position signal to the ECU and is the main control signal for ignition. The methods for measuring the condition of the camshaft position sensor are as follows: 1. The camshaft sensor is generally a three-wire Hall sensor, with one wire being a 12v or 5v power line, one signal line, and one ground line; 2. Unplug the connector, turn the key to the second position, and use a voltmeter to confirm that the power line has voltage output. Use the meter to identify the ground line. Connect one probe of the voltmeter to the confirmed power line and the other probe to the remaining two lines. The line that shows voltage is the ground line, and the remaining one is the signal line; 3. At this point, turn off the key and disconnect the signal line, plug the connector back in, start the engine, and measure the signal line and ground line to see if there is a signal voltage. The output voltage should be less than the supply voltage. If there is no signal voltage output, the sensor is faulty.
14
4
Share

Which country does the Ford brand belong to?

Ford is a renowned American automobile brand, one of the many brands under the Ford Motor Company. It is an American car. Here is expanded information about Ford's vehicle series: 1. Ford primarily includes three vehicle series: Changan Ford, imported Ford, and Jiangling Motors. 2. Currently, Changan Ford's models on sale include the Focus, Mondeo Zhisheng, S-MAX, Fiesta, Kuga, and EcoSport, totaling six models. 3. Currently, imported Ford's models on sale include the E350, Edge, Mustang, Explorer, and F-150, totaling five models. 4. Currently, Jiangling Motors' models on sale include the Ford Transit Custom and Classic Transit, totaling two models.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.