What engine is used in the Fengxing S500?

Where is the vehicle frame number located?

The vehicle frame number (VIN) is located in the engine compartment, on the left side of the dashboard, or at the lower left corner of the windshield. The VIN is a unique 17-character alphanumeric code that identifies the vehicle's manufacturer, engine, chassis number, and other specifications. The meaning of the VIN is divided as follows: 1. The first character represents the country or region of production; 2. The second character indicates the vehicle manufacturer; 3. The third character denotes the vehicle type; 4. Characters 4 to 8 represent vehicle features; 5. The ninth character is a check digit; 6. The eleventh character indicates the assembly plant; 7. Characters 12 to 17 represent the serial number. The functions of the VIN include: 1. Confirming the vehicle's identity for accurate identification in special circumstances; 2. Traffic violation queries—input the VIN to check for violations; 3. Vehicle batch inquiries to determine if the vehicle is subject to a recall.

14

1

Share

How to Open the Antifreeze Cap?

The method to open the antifreeze cap is: After parking for half an hour, cover the antifreeze cap with a towel, press down on the cap, and turn it counterclockwise with force. The full name of antifreeze is antifreeze coolant, and its functions are: 1. Provide freeze protection for the engine against low-temperature environments; 2. Prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block and cylinder head when parking in cold winters; 3. Provide efficient heat dissipation. The steps to replace antifreeze are: 1. Unscrew the radiator cap to drain the antifreeze; 2. Run the engine at idle speed and inject clean water until the radiator releases clean water; 3. After the clean water has drained, close the water valve; 4. Fill with new antifreeze until the liquid level is between the max and min water level marks; 5. Close the cap and let the engine idle for two to three minutes.

15

2

Share

What tires does the Audi Q5 use as original equipment?

Audi Q5 uses Excellence series tires as original equipment. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground, usually mounted on metal rims. They support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. The Audi Q5 is a 5-door, 5-seat mid-size SUV under FAW-Volkswagen, with body dimensions of 4753mm in length, 1893mm in width, and 1659mm in height, a wheelbase of 2908mm, and a fuel tank capacity of 73 liters. The Audi Q5 is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 169 kW at 4300 to 6000 rpm and a maximum torque at 1500 to 4200 rpm. Both front and rear suspensions adopt a five-link independent suspension system.

1

2

Share

What is the fuel tank capacity of the Mercedes-Benz E300?

The fuel tank capacity of the Mercedes-Benz E300 is 66 liters. Fuel tanks can be divided into two types: open and closed, and their function is to store the working fluid required by the hydraulic system, while also dissipating heat, settling impurities, and separating air bubbles from the liquid. The Mercedes-Benz E300 is a mid-to-large-sized 4-door, 5-seater sedan with body dimensions of 4942mm in length, 1860mm in width, and 1458mm in height, with a wheelbase of 2939mm and a fuel tank capacity of 66 liters. The Mercedes-Benz E300 is equipped with a 2.0T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 190 kW at 5800-6100 rpm and a maximum torque of 370 Nm at 1800-4000 rpm. It features a front-engine, rear-wheel-drive layout and uses multi-link independent suspension for both the front and rear axles.

19

3

Share

What to Do When a Car Door Lock Freezes?

Solutions for a frozen car door lock include: 1. Pouring water around 60 degrees Celsius along the edge of the car door; 2. Using a hairdryer set to warm air to blow on the frozen area. Car doors provide access for drivers and passengers, isolate external disturbances, and to some extent, reduce side impacts to protect occupants. The design requirements for car doors are: 1. Ensuring ease of entry and exit for passengers, with an opening angle controlled between 65 to 70 degrees; 2. No positional interference with other parts during the opening process; 3. Reliable locking when closed, preventing self-opening while driving; 4. Good sealing performance; 5. Large transparent area to meet lateral visibility requirements; 6. Sufficient strength and rigidity to ensure reliable door operation, reduce door vibrations, enhance side collision safety, and prevent door sagging.

6

1

Share

What suspension does the Volvo S80L use?

Volvo S80L uses MacPherson independent front suspension and multi-link independent rear suspension. The suspension is the general term for all force-transmitting connection devices between the car's frame and axle. Its functions are: to transmit forces and torques acting between the wheels and the frame, and to cushion the impact from uneven road surfaces transmitted to the frame or body, reducing the resulting vibrations to ensure smooth driving. Taking the Volvo S80L 2015 Zhiya Edition as an example, its body dimensions are: length 4991 mm, width 1861 mm, height 1490 mm, wheelbase 2976 mm, and fuel tank capacity 70 liters.

3

5

Share

What engine is used in the Fengxing S500?

Where is the vehicle frame number located?

How to Open the Antifreeze Cap?

What tires does the Audi Q5 use as original equipment?

What is the fuel tank capacity of the Mercedes-Benz E300?

What to Do When a Car Door Lock Freezes?

What suspension does the Volvo S80L use?

What are the latest regulations for Beijing license plate transfer?

How to Detect Oxygen Sensor Signals?

What are the length and width of the Chevrolet Trax?

How to Repair Vehicle Dents?