What engine is used in the Chery Tiggo 8plus?

What are the differences between National V and National VI standards for the Golf?

The differences between National V and National VI emission standards are as follows: Different emission standards: The National VI emission standard is more than 30% stricter than National V. Excluding the influence of driving conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The National V standard was implemented nationwide on January 1, 2017. The National VI standard has been in effect since July 1, 2019. Different principles: Under National V, diesel and gasoline vehicles had different emission standards, but National VI adopts a fuel-neutral principle, meaning the emission limits are the same regardless of fuel type. Different issuing authorities: The National V standard was issued by the Ministry of Environmental Protection, while the National VI standard was jointly issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: National V is represented by 'V,' while National VI is represented by 'VI.' Different monitoring requirements for plug-in hybrid electric vehicles (PHEVs): Compared to National V, National VI has enhanced monitoring requirements for PHEVs, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulatory aspects. The National V standard limits are as follows: Gasoline vehicles must not emit more than 1,000 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM (fine particulate matter) per kilometer driven. National VI has two sub-standards: National VIa and National VIb. Their limits are as follows: National VIa standard limits: Gasoline vehicles must not emit more than 700 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM per kilometer driven. National VIb standard limits: Gasoline vehicles must not emit more than 500 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 mg of PM per kilometer driven. Due to the impact of the National VI emission policy, although National V vehicles are not currently restricted in normal use (no driving bans or plate restrictions), their resale value will be significantly affected. For car owners, if they purchase a truck on loan for cargo transport, the vehicle's depreciation after repaying the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, National VI vehicles, which have a longer lifespan and more road-use privileges, are more advantageous.

1

3

Share

What is the tire model of the Livina?

The Livina's tire specifications are 195/55R16 and 185/65R15. In 195/55R16, the first number 195 represents the tire width of 195MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 represents the rim diameter of 16 inches. The middle letter "R" stands for radial tire. In 185/65R15, the first number 185 represents the tire width of 185MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 15 represents the rim diameter of 15 inches. The middle letter "R" stands for radial tire. The Livina's tire brands are Dunlop or Bridgestone, and the spare tire specification is non-full size. If you want to replace the tire yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise. Do not fully loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts, not the tire, are turning; Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts and completely remove the nuts; Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and hand-tighten them until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.

20

5

Share

What is the normal range for Volkswagen Group 93 data?

Volkswagen Group 93 data displays the timing chain section, where the normal value for Zone 2 should be within ±3. Below is detailed information about automotive timing chains: Overview: The primary function of an engine timing belt is to drive the engine's valve train, ensuring that the intake and exhaust valves open and close at the appropriate times to guarantee normal cylinder breathing. Additional Information: Rubber timing belts experience wear and aging of components such as tensioners, idlers, and water pumps as engine operating hours increase. Compared to traditional belt drives, chain-driven systems offer more reliable transmission, better durability, and space-saving advantages.

20

1

Share

Is it okay to occasionally switch to 95 gasoline when regularly using 92?

It is acceptable to occasionally switch to 95 gasoline when regularly using 92, as the vehicle's power will not show significant changes. However, frequent switching is not recommended. Additional information: The differences between 95 and 92 gasoline are as follows: 1. Different proportions of n-heptane and isooctane: 95 gasoline contains 95% isooctane and 5% n-heptane; 92 gasoline contains 92% isooctane and 8% n-heptane. 2. Different anti-knock properties: The anti-knock index of 95 gasoline is 90; the anti-knock index of 92 gasoline cannot be less than 87.

8

4

Share

Can I Force the Gear if the Clutch is Flooded and Won't Engage?

Do not attempt to force the gear. If the engine stalls due to water ingress, never attempt to restart the vehicle. Instead, wait on-site for the car to be towed away. Below is relevant information about water-damaged vehicles: Concept: A water-damaged vehicle refers to a car that has been submerged in water, typically meaning the engine and transmission have been soaked, with water levels exceeding the wheels and seats, and prolonged contact between underbody components and water. Such vehicles pose significant risks, as electrical circuits are prone to short circuits and potential fires. Insurance: There are two types of insurance related to water damage: the most common is comprehensive vehicle insurance, and the other is called special engine loss insurance, commonly known as flood insurance.

9

4

Share

How to Read a Motorcycle Oil Dipstick?

When checking the oil level, insert the dipstick all the way down (note: do not screw it in, just push it down completely), then pull it out to observe the oil level. The oil level should be between the upper and lower limits of the grid pattern. Here are some details about engine oil: 1. Function: Engine oil is crucial for the engine. It not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat. 2. Regular oil changes are necessary: Over time, the performance of engine oil degrades, so it needs to be changed regularly. Prolonged use without changing the oil can accelerate engine wear.

15

4

Share

What engine is used in the Chery Tiggo 8plus?

What are the differences between National V and National VI standards for the Golf?

What is the tire model of the Livina?

What is the normal range for Volkswagen Group 93 data?

Is it okay to occasionally switch to 95 gasoline when regularly using 92?

Can I Force the Gear if the Clutch is Flooded and Won't Engage?

How to Read a Motorcycle Oil Dipstick?

What is the starting RPM for a car?

Must the Car Insurance Policyholder Name Match the Vehicle Owner Name?

Is There Any Impact When Mixing 98 and 95 Gasoline?

What does the ECO light indicate?