···
Log in / Register

What engine is used in the Changan Oushang A600?

4 Answers
Zachary
07/29/25 10:34pm

Changan Oushang A600 uses an engine produced by Harbin Dongan Engine Group, which is a domestic engine. The engine model of Changan Oushang A600 is JL473QF, with a maximum power of 78.5kW, maximum torque of 145Nm, and maximum horsepower of 107Ps. For daily maintenance of the Changan Oushang A600 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid failures, oil should be changed regularly according to usage conditions, and the oil quantity should be moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to pass through the bypass valve and bring dirt back to the lubrication parts, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and cylinder wall, mixing with metal powder generated by part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

Was this review help?
12
5
Share
DiEliza
08/15/25 11:34pm

The Changan Oushang A600 primarily uses a 1.5L naturally aspirated engine, commonly from Changan's own JL473 series, such as the JL473QG. Though small in displacement, it delivers adequate power, making it more than sufficient for city driving. Having worked with many similar engines, I can say its maximum power is around 107 horsepower, with torque approximately at 145 N·m, and it pairs smoothly with either manual or automatic transmissions. This engine is fuel-efficient, consuming about 6-7 liters per 100 kilometers, and maintenance is straightforward—just regular attention to oil and spark plug changes. In terms of durability, it's considered reliable among Changan's lineup, typically running for years without major issues. However, it might feel slightly underpowered for long-distance highway driving, so regular checks of the cooling system and fuel lines are recommended. Overall, it offers great value for money and is ideal for daily commuting.

Was this review help?
20
0
Share
Expand All
Adams
10/18/25 3:41am

Speaking of the Changan Oushang A600's engine, I get excited! It's equipped with a 1.5L naturally aspirated engine based on the JL473 platform, delivering a smooth and steady driving experience. The power response isn't aggressive but offers enough flexibility for city overtaking. I particularly like its acceleration tuning—gentle at start-up without any abruptness, making it ideal for beginners or commuters. Paired with a manual transmission, it provides enjoyable handling while maintaining decent fuel efficiency. When chatting about cars with friends, I often recommend this engine for its low maintenance costs—just a quick filter change at a local shop does the trick. For occasional mountain drives, adding an air filter upgrade is advisable. While its overall performance isn't jaw-dropping, it's reliable; you won't worry about breakdowns even after long-term use.

Was this review help?
11
1
Share
Expand All
HaleyMarie
12/01/25 4:20am

The Chang'an Oushang A600 commonly features a 1.5L gasoline engine, a self-developed model by Chang'an. I think this engine is very suitable for family use, with low fuel consumption, quiet and comfortable driving, and not too noisy to disturb children's rest. The space is reasonably arranged, and the power is sufficient for city errands or picking up kids. Maintenance is also simple, with most service items being affordable and quick. In terms of safety, the engine meets the China VI emission standards, operates stably, and reduces the risk of malfunctions. Tasks like oil changes can be done by yourself, eliminating the need to visit a large shop every time. It has good durability, requiring no major repairs for several years.

Was this review help?
5
5
Share
Expand All
More Forum Discussions

What Causes High Engine Temperature?

Here are several common causes of engine overheating: 1. Insufficient coolant leading to high temperature: Coolant deficiency is the easiest to identify—simply open the engine hood and check the coolant level. If the coolant level is below the "MIN" mark, it indicates insufficient coolant. 2. Dirty radiator causing temperature rise: If the engine compartment accumulates excessive dust due to long-term lack of cleaning, it can lead to poor heat dissipation in the radiator, resulting in high engine temperature. Generally, overheating caused by excessive dust on the radiator can be resolved by simply cleaning the dust off the radiator. 3. Thermostat malfunction causing temperature rise: The thermostat's function is to automatically adjust the amount of water entering the radiator based on the coolant temperature, altering the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within the appropriate temperature range. If high temperature is noticed during normal driving, open the engine hood and touch the radiator's inlet and outlet pipes to check for a temperature difference. If a temperature difference exists, it indicates a faulty thermostat that cannot function properly, leading to high engine temperature. 4. Electric fan malfunction causing temperature rise: Fan failure is another cause of engine overheating. A non-operational fan leads to insufficient radiator cooling, causing high engine temperature. There are many reasons for fan failure, including fan motor malfunction, thermostat failure, or a blown fan fuse, all of which can prevent the fan from operating.
9
1
Share

What is the sound when hitting the radar?

Radar emits a continuous beep when hitting an obstacle. Here are the relevant details: 1. Reversing Radar: The reversing radar, also known as "reverse anti-collision radar" or "parking assist device", mainly consists of ultrasonic sensors, a controller, and a display. 2. Working Principle: When reversing, the reversing radar uses the ultrasonic principle. The probe installed on the rear bumper sends ultrasonic waves that reflect off obstacles, calculates the actual distance between the vehicle body and the obstacle, and then alerts the driver, making parking or reversing easier and safer.
14
1
Share

Which institutions can inspect used cars?

Seek independent third-party vehicle inspection institutions with nationwide chains for more reliable results. Below are methods to check if a used car has been in an accident: 1. Check the glass production date: Normally, glass isn't replaced, so checking its production date can be telling. The date is usually in a format of numbers + dots, where numbers represent the year and dots represent the month. 2. Examine the wear on the frame: If the car has been in a major accident, the body frame will show varying degrees of dents and misalignment, so assessing the frame's condition can indicate past accidents. 3. Inspect the screws: Look at the screws on the hood, radiator support, and door connections. If any of these screws show abnormalities, it's a strong indication the car was in a major accident. 4. Review maintenance records: Check the maintenance records at authorized dealerships (4S shops). Any accident repairs done at a 4S shop will be systematically recorded.
4
4
Share

Standard Values for Intake Air Temperature Sensor?

Under normal conditions, the resistance is approximately 2-3 kiloohms at 20°C and about 0.4-0.7 kiloohms at 80°C. If the measured values do not meet the specified requirements, the sensor should be replaced. When the intake air temperature sensor installed inside the air flow sensor is damaged, the air flow sensor should be replaced. Below is additional information about the intake air temperature sensor: 1. Function: The intake air temperature sensor is essentially a negative temperature coefficient thermistor. Its role is to transmit the intake air temperature to the ECU in the form of a voltage signal, which the ECU then uses as a correction signal for fuel injection and ignition. 2. Location: The intake air temperature sensor is typically installed in the intake pipe or within the air flow meter. 3. Damage Consequences: If the engine's intake air temperature sensor is damaged, the ECU not only fails to accurately use it as a correction signal for fuel injection and ignition but may also receive incorrect information, leading to issues such as difficulty starting the engine, unstable idle speed, and increased exhaust emissions.
18
2
Share

How to Adjust Rearview Mirrors for Subject 2 Driving Test?

Here is the relevant introduction on adjusting rearview mirrors for Subject 2 driving test: 1. Reverse Parking: During reverse parking training, when moving the vehicle left backward, focus mainly on the left mirror; when moving right backward, focus on the right mirror. Adjusting the rearview mirrors vertically allows you to clearly see the position of points and lines on the ground, serving as a reference during training. Therefore, adjust the mirrors vertically until you can see the rear wheels or even the contact point between the rear wheels and the ground. Adjusting the mirrors horizontally affects the breadth of your field of vision, helping you make early judgments during training. Hence, adjust the mirrors horizontally until you can see the rear of the car or even the rear corners of the garage. 2. Hill Start: When going uphill, maintain a 30cm distance between the car body and the right roadside line. Adjust the right mirror downward until you can clearly see the wheels and the right roadside line. 3. Right-angle Turn: When approaching a right-angle turn, if it's a left turn, stay close to the right roadside line. Adjust the right mirror outward and downward until you can clearly see the distance between the car body and the roadside line. During the turn, maintain a 10cm distance between the car body and the right line, which is the optimal distance for a right-angle right turn. The same principle applies to right turns. 4. Curve Driving: During curve driving, rearview mirrors serve as excellent auxiliary references. Adjust both mirrors maximally downward and inward to clearly observe the distance between the rear wheels and the S-curve line, allowing timely adjustments in direction and speed. 5. Parallel Parking: Parallel parking involves frequent use of both side mirrors. Taking right parallel parking as an example, before parking, ensure the wheels are about 10cm from the roadside line. When the rear wheels are about to reach the front line of the parking space, turn the steering wheel fully to the right. Both steps require the right mirror to clearly see the rear wheels and the roadside line. The next steps involve looking at the inner corner of the parking space to straighten the steering wheel and observing when the left rear wheel touches the outer line of the parking space to turn the steering wheel fully right for parking. Both steps require the left mirror, which should be slightly more outward compared to the right mirror to ensure the inner corner of the parking space is visible immediately.
15
5
Share

What are the body dimensions of the Yingzhi 737?

The Yingzhi 737 has a body length of 4510mm, a width of 1760mm, a height of 1750mm, and a wheelbase of 2785mm. More details about the Yingzhi 737 are as follows: 1. The Yingzhi 737 is equipped with a 1.5-liter naturally aspirated engine, with a maximum power of 83kw, a maximum torque of 141nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4000 rpm. 2. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The front suspension of the Yingzhi 737 uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The use of a torsion beam in the rear suspension can expand the rear seating space and trunk space.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.