···
Log in / Register

What engine is used in the Changan CS75?

4 Answers
OMax
07/23/25 9:32pm

Changan CS75 is equipped with the all-new BlueCore 280T direct-injection turbocharged engine, which is independently developed and produced by Changan Automobile. This engine incorporates the most advanced technologies and is currently used across the entire CS75 lineup. It is also being adopted in other Changan vehicle models. More detailed information is as follows: 1. Changan CS75 engine technology: The Changan CS75 engine features a 200bar high-pressure fuel injection system, along with advanced technologies such as direct fuel injection, turbocharging, water-cooled intercooling, and variable displacement oil pump. Notably, the single-cycle five-time injection technology is the first of its kind to be applied—and even mass-produced—in TGDI engines in China. 2. In addition to outstanding power performance, the all-new BlueCore 280T direct-injection turbocharged engine also excels in fuel economy.

Was this review help?
6
3
Share
LaMiguel
08/10/25 5:15pm

The Changan CS75 is equipped with a Blue Core series 1.5-liter turbocharged engine. I've been driving this car for many years, and the power is really impressive—quick starts, smooth acceleration, and no pressure when climbing hills or driving on highways. In daily driving, the engine noise is minimal, and fuel consumption is well controlled, averaging around 8 liters per 100 kilometers in the city. The transmission is paired with either a six-speed automatic or a seven-speed dual-clutch, ensuring smooth gear shifts without noticeable jerking. I frequently take long trips, and the engine's reliability is high, with simple maintenance and reasonable costs—just basic parts replacement at the 4S shop is sufficient. Compared to some joint-venture cars, Changan's engine design is quite mature, with a low failure rate, and it runs smoothly even after tens of thousands of kilometers. I recommend new owners to regularly check fluids to extend the engine's lifespan and avoid unexpected issues. Overall, choosing the CS75's engine for a family SUV is a great value, offering good cost-effectiveness without hassle.

Was this review help?
1
2
Share
Expand All
Serena
09/23/25 5:09am

Speaking of the engine in my Changan CS75, mine is the 2021 model equipped with the 1.5T BlueCore engine. It delivers adequate power while being fuel-efficient, making it effortless to drive even in congested urban commutes. The engine produces around 178 horsepower with 265 Nm of torque, and the automatic transmission responds swiftly. Primarily used for city driving, my average fuel consumption is a economical 7-8 liters per 100km, making refueling less painful. Maintenance is straightforward with oil and filter changes every 5,000 kilometers at reasonable costs. This engine features Changan's in-house technology, utilizing lightweight aluminum alloy block design for reduced noise. Compared to older versions, the current CS75 PLUS engine has optimized emissions to meet China VI standards for better environmental performance. Personally, I recommend regular checks on spark plugs and intake systems to ensure smooth operation and driving pleasure.

Was this review help?
19
1
Share
Expand All
LeDonovan
11/06/25 7:25am

The Changan CS75 is equipped with a 1.5-liter turbocharged direct-injection engine from the BlueCore series. It delivers a maximum power of 178 horsepower and a peak torque of 265 N·m, utilizing GDI technology to improve fuel efficiency. The emissions meet the China VI-B standard, with a relatively low daily driving fuel consumption of approximately 7-8L per 100 km. The engine features a compact and reliable structure, with aluminum alloy materials reducing weight and enhancing performance. Paired with a six-speed automatic transmission, it offers smooth shifting and strong practicality. With advanced technology and simple maintenance, it is well-suited for long-term use by family users.

Was this review help?
11
4
Share
Expand All
More Forum Discussions

Why is the Car Suspension So Hard and Bumpy?

Generally, excessive stiffness in the suspension is due to the car being new, as the mechanical components have not yet fully broken in. It is normal for the owner to feel that the suspension is too hard, and it will improve after the break-in period. Additionally, tire pressure should be maintained within the normal range, as excessively high tire pressure can also affect driving stability. Symptoms of damaged shock absorbers: 1. Shock absorber oil leakage: A normal shock absorber has a dry and clean exterior surface. If oil is seeping out, it indicates that the hydraulic oil inside the shock absorber is escaping from the upper part of the piston rod, meaning the shock absorber is essentially failing. 2. Clunking noise from the wheels: When the car passes over bumpy roads or speed bumps, a clunking noise from a particular wheel indicates poor or failed damping performance of the shock absorber on that wheel. 3. Increased body roll: When cornering, a noticeable increase in body roll, or even skidding in severe cases, is mainly due to insufficient damping force from the shock absorber, which fails to effectively suppress the compression of the springs.
19
5
Share

What does the AC in car air conditioning mean?

Car air conditioning AC is the compressor switch, also known as the air conditioning cooling switch, used in summer. AC is the abbreviation for air conditioning, with the full name being air condition, which can be understood as air control or air adjustment. It achieves the purpose of cooling or heating through different operation modes of the air conditioning compressor, thus having dual meanings of cooling and heating. However, in cars, since the heating function of the car air conditioning is accomplished through the heat from the engine cooling water and the glass heating wires, AC only has the meaning of cooling. In AC mode, because the car air conditioning compressor is always in operation, it will inevitably lead to increased fuel consumption and additional burden on the engine. When using the heating function, the AC switch must be turned off to prevent the compressor from running while heating, which would cause unnecessary extra fuel consumption.
13
2
Share

What are the precautions for cleaning car air conditioning?

Here are the precautions for cleaning car air conditioning: 1. Inappropriate methods for cleaning the air conditioning filter element and filter cotton: It is not suitable for washing with water. Similar to the filter screens used in home air conditioners, most cars have an air intake filtration device installed at the external circulation air intake. When the external circulation of the air conditioning is activated, air is drawn from outside the car, heated or cooled, and then blown out through the interior vents. A large amount of dust accumulates in the air conditioning ducts, which are damp and warm, making them prone to bacterial growth. When passing through the evaporator, the water vapor in the air condenses into water droplets. Normally, the water flows to the bottom of the air conditioning heating device housing, washing away the attached dust, and is then discharged outside the car through a drain pipe. If the car is frequently driven in dusty areas, the impurities and dust in the air cannot be completely washed away by the water on the evaporator blades, gradually accumulating on the blades and creating a breeding ground for mold. If cleaning is neglected, a musty odor will develop when the air conditioning is turned on. In such cases, it is necessary to clean the air conditioning system's ducts, radiator, air conditioning evaporator, and air intake filtration device to eliminate pollution sources and ensure clean air inside the car. It safeguards air quality and protects health. 2. The air conditioning filter element is prone to accumulating a lot of dust: Use specialized equipment to blow away the loose dust; never wash it with water, as this can easily damage it. When cleaning the air filter element, the filter cotton should also be cleaned. During cleaning, use a blowing method to dry it; do not directly wash the filter cotton with water. Usually, car owners should also park the car in a dry place, as materials like sponge easily absorb moisture, and dampness can breed bacteria.
6
3
Share

Does the Engine Auto Start-Stop Save Fuel?

According to the instructions for the auto start-stop function, idling for more than one second can save fuel. In congested road conditions, the auto start-stop function can save up to about 15% of fuel, and even more if the traffic is heavier. Issues brought by start-stop technology: 1. Increased fuel consumption: The auto start-stop technology is mainly used in traffic jams, where the engine is often in a hot state. The engine can typically start at 350 RPM, which is nearly half the idle speed. Assuming there are no other loads besides the engine's internal resistance during startup and the necessary equipment such as the transmission's loss, the fuel consumption will definitely be less than during idle conditions. 2. Frequent starts can cause wear to the engine: The engine's internal lubrication mainly relies on the oil film. Given that the auto start-stop duration is very short, the oil pumped up by the oil pump will not completely drain back, and sufficient oil remains on the friction components. The lubrication of friction components during startup, especially during a hot start at such low RPM and short duration, has no significant adverse effects. The belief that it causes significant engine wear applies to cold starts and high-temperature cold start conditions.
19
0
Share

Is the AC button in the car air conditioning for cooling or heating?

The AC button in the car air conditioning is the cooling switch, which refers to the air conditioning compressor switch. The cooling function of the car air conditioning is controlled by the AC switch on the air conditioning control panel. When the AC switch is turned on, the compressor's electromagnetic clutch engages, and the compressor starts working, enabling the car air conditioning to cool. The car air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, which are used to regulate the temperature and humidity inside the car, providing a comfortable environment for passengers. The air conditioning also has an internal and external circulation switch. The internal circulation mode reuses the air inside the car, while the external circulation mode draws air from outside the car.
9
5
Share

What does the AC button in a car's air conditioning system mean?

Car air conditioning AC button refers to the air conditioning cooling switch, which is the power switch for the air conditioning compressor. How to use car air conditioning buttons: 1. Front windshield defrost and rear windshield defrost: A fan shape with an upward curved arrow, marked with 'front', activates the front windshield defrost function, while 'rear' indicates the rear windshield defrost function; 2. Car air conditioning airflow direction: An arrow pointing to the head means air blows upward, while pointing to the feet means air blows downward; 3. Seat heating: A chair with a curved arrow pattern indicates seat heating function, while a small fan symbol indicates seat ventilation function; 4. Car air conditioning vents: Used to control air volume and direct or diffused airflow.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.