···
Log in / Register

What engine is used in the Changan CS35?

5 Answers
EvanFitz
07/24/25 9:00am

Changan CS35 is equipped with two engines, namely a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. The maximum power outputs are 92kW and 115kW respectively, with maximum horsepower of 125ps and 156ps. The peak torque figures are 160Nm and 210Nm, while the maximum power rotation speeds reach 6000rpm and 5000rpm respectively. The engines are paired with either a 5-speed manual transmission or a 4-speed automatic manual transmission. The Changan CS35 is a compact SUV launched by Changan Automobile, measuring 4170mm in length, 1810mm in width, and 1670mm in height, with a wheelbase of 2560mm. The front and rear track widths are both 1560mm, and the vehicle weighs 1270kg.

Was this review help?
12
1
Share
VanWilliam
08/11/25 1:25am

As a frequent driver of the Changan CS35, my car is equipped with Changan's self-developed 1.6-liter naturally aspirated gasoline engine, delivering around 125 horsepower. It provides smooth and non-abrupt power delivery. Driving in the city, the acceleration from a standstill is fluid, and it has enough power for overtaking on highways. The average fuel consumption is about 7 liters per 100 kilometers, which is much more fuel-efficient than SUVs in the same price range. After driving for over two years, the engine has had no issues, and maintenance is simple and affordable, requiring only regular oil changes and electrical circuit checks. The engine operates quietly with good vibration control, ensuring a comfortable driving experience. The CS35 Plus also offers a 1.5T turbocharged version with stronger power but at a higher price. Overall, this engine is reliable and durable, making it suitable for daily family use.

Was this review help?
20
2
Share
Expand All
DelRichard
09/25/25 2:34am

I'm the type who enjoys studying car details in my free time. The Changan CS35 is equipped with a 1.6L Blue Core series gasoline engine, delivering 125 horsepower and approximately 150Nm of torque. It utilizes dual VVT technology to enhance combustion efficiency, with fuel consumption maintained at 6-7 liters per 100km. The acceleration is linear without much explosive power but remains stable. During my test drive, I noticed the engine noise suppression was quite good, with smooth power output at low RPMs, ample maintenance space, and affordable parts. The high-end version features a 1.5T turbocharged variant, offering quicker 0-100km/h acceleration but at a higher price. In terms of reliability, it has a good reputation, with rare reports of oil burning issues. Compared to joint-venture cars, this engine may have simpler technology but offers strong practicality, making it suitable for budget-conscious owners who still seek quality.

Was this review help?
19
4
Share
Expand All
EmiliaMarie
11/08/25 4:42am

As an average driver, my CS35 with the Changan 1.6L gasoline engine is quite practical. It delivers stable power for daily driving with no issues, and performs adequately on highways without excessive noise concerns. Fuel consumption is low, averaging just over 7L/100km - a full tank can cover 500km, saving fuel costs. Maintenance is affordable at just a few hundred yuan every six months, and reliability has been excellent with no major repairs needed over several years of ownership. The engine is simple to maintain, requiring only regular checks of fluids and electrical circuits, making it suitable for beginners or budget-conscious buyers. While the CS35 Plus offers a turbocharged version, the base model's engine is sufficient - it responds quickly, provides good anti-slip safety features, and delivers solid performance.

Was this review help?
12
5
Share
Expand All
MadelynRose
12/29/25 6:28am

Considering the cost of car ownership, the 1.6L naturally aspirated gasoline engine in the CS35 is very cost-effective. With low fuel consumption averaging 6-7 liters per 100 kilometers, it saves thousands in annual fuel costs. Maintenance is easy with affordable and reliable parts, plus decent resale value. The 1.5T version offers stronger power but slightly higher fuel expenses. The engine design ensures stable and smooth city driving with adequate highway performance. Long-term use shows minimal faults and well-controlled maintenance costs. The smooth power output enhances safety by reducing accident risks. Ideal for families or commuters seeking affordability and peace of mind.

Was this review help?
14
3
Share
Expand All
More Forum Discussions

Can the Volkswagen Sagitar 1.4T use 92 gasoline?

Volkswagen Sagitar 1.4T can use 92 gasoline, and the specific reasons are as follows: 1. For vehicles equipped with Volkswagen's 1.4T turbocharged engine, the official recommendation is to add 95 gasoline, and 92 gasoline is an alternative. The impact on the car engine will not be significant. However, long-term mixed use is not recommended, as it may cause severe engine carbon deposits and issues like detonation. 2. The difference between 95 gasoline and 92 gasoline is not about the quality of the fuel. A higher gasoline octane number does not mean better quality; it only indicates that the higher the octane number, the better the gasoline's anti-knock performance. The anti-knock performance of 95 gasoline is equivalent to that of a standard oil containing 95% isooctane and 5% n-heptane, while 92 gasoline is equivalent to a standard oil containing 92% isooctane and 8% n-heptane.
7
1
Share

What are the sensors in Skoda Octavia?

Octavia vehicle sensors are input devices for the car's computer system. They convert various operating condition information during the car's operation, such as speed, temperature of various media, and engine operating conditions, into electrical signals and transmit them to the computer to ensure the engine operates in the optimal state. The main sensors and their locations are as follows: 1. Oxygen sensor: Installed on the exhaust pipe, it monitors the post-combustion gases to determine whether the engine combustion is sufficient and whether the mixture is too lean or too rich. 2. Wheel speed sensor: It primarily collects the car's rotational speed to detect any signs of wheel slip. 3. Coolant temperature sensor: Usually located near the thermostat, it converts the coolant temperature into an electrical signal. At low temperatures, it increases fuel injection or advances the ignition timing angle, while at high temperatures, it prevents knocking by retarding the ignition timing angle. 4. Intake pressure sensor: Typically installed near the throttle valve, as the name suggests, it senses a series of resistance and pressure changes according to the engine's varying speed and load, converting them into voltage signals for the ECU to adjust fuel injection and ignition timing angles.
2
4
Share

What does MHEV mean in cars?

MHEV in cars refers to Mild Hybrid Electric Vehicles. Mild hybrid vehicles show significant improvements in smoothness and driving quality compared to traditional fuel-powered cars. Typically, these are vehicles equipped with an internal combustion engine that includes an electric component, allowing the engine to shut off when the car is coasting, braking, or stopped, and to restart quickly. Below is more information about mild hybrid electric vehicles: 1. Mild hybrid electric vehicles can utilize regenerative braking and provide a certain level of power assistance to the internal combustion engine (ICE), but they do not have a pure electric propulsion mode. 2. Advantages of mild hybrid vehicles: Mild hybrid vehicles may offer some benefits of hybrid technology application while incurring less cost-weight penalty compared to installing a full hybrid series-parallel drivetrain. Since this design does not facilitate high levels of regenerative braking or necessarily promote the use of smaller, lighter, and more efficient internal combustion engines, the fuel savings are usually lower than what would be expected with a full hybrid design. 3. General Motors' mild hybrid vehicles include the Parallel Hybrid Truck (PHT) and many cars and SUVs equipped with the BAS hybrid system, typically using 36 to 48-volt systems to provide the necessary power for the starter motor.
16
5
Share

What is the specific oil model for Citroen C5?

The suitable oil model for Citroen C5 is 5W-30, but 5W-40 is also applicable. These two oil models, 5W-30 and 5W-40, have the same low-temperature fluidity but differ in high-temperature performance. The 5W-40 offers better high-temperature protection and sealing performance. However, due to its higher viscosity, it increases engine running resistance and fuel consumption. Additional information: 1. Owners can choose based on their needs and also consider factors such as driving environment and habits. If the owner drives aggressively, frequently in congested areas, or the vehicle is older, using the higher viscosity 5W-40 oil may be considered for better engine protection. 2. When selecting an oil brand, if longevity is a priority, Mobil oil is recommended; for cleaning performance, Shell oil is suggested; for strong oil film toughness, Castrol is advocated. For example, turbocharged engines, which are prone to carbon buildup at high speeds, may benefit from Shell oil's strong cleaning capabilities.
1
5
Share

How to Turn on the Cold Air in BYD S6 Air Conditioning?

Here are the steps to turn on the cold air in BYD S6 air conditioning: 1. Start the vehicle and wait for all components to power on; 2. Press the A/C button and turn on the fan switch; 3. Turn the temperature control knob to the blue side to release cold air, then adjust the fan speed and set the temperature as needed. Below is a brief introduction to the BYD S6: 1. The BYD S6 is BYD's first SUV, positioned as a mid-to-high-end domestic SUV, which was launched in September 2010. Its dimensions are 4810/1855/1680mm in length/width/height, with a wheelbase of 2720mm, ranking among the top in its class. A minimum ground clearance of 190mm ensures excellent off-road performance. 2. In terms of powertrain, the S6 offers three engine options: 1.5T, 2.0L, and 2.4L, available in four trims: Manual Luxury, Manual Premium, Automatic Premium, and Automatic Ultimate. It is equipped with either the BYD483QB or Mitsubishi 4G69 engine. The BYD483QB is a self-developed engine by BYD, featuring Bosch's electronic fuel injection management system and BIVT variable intake system. The BYD S6 boasts a stylish and dynamic exterior with bold lines, showcasing the free-spirited temperament of an urban SUV.
8
0
Share

What is the full name of the Lynk & Co 03?

Lynk & Co 03's full name is Lynk & Co 03, the third mass-produced model under the Lynk & Co brand. Lynk & Co is a premium brand with European technology, European design, global manufacturing, and global sales. In August 2017, Geely Auto, Volvo Cars, and Geely Holding Group signed a joint venture agreement, making Lynk & Co a premium joint venture brand between Geely Auto and Volvo Cars. Below is an introduction to the Lynk & Co 03: 1. In terms of configuration, it features three-screen interaction, cloud connectivity, remote APP control, 17 intelligent driving assistance technologies, and active and passive safety technologies. The Lynk & Co 03 2.0TD adds driver's seat memory and ventilation functions on top of the 1.5TD model's configuration. 2. In terms of power, the Lynk & Co 03 is equipped with a high-efficiency 1.5TD engine from the Drive-E series. The turbo starts to engage at 1000rpm, delivering 150N·m of torque. At 1500rpm, the engine reaches its maximum torque of 265N·m. The turbo engages quickly, providing rapid low-speed response, making hill climbing and overtaking easier. The 0-100km/h acceleration time is just 7.9 seconds.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.