What engine is used in the BMW 8 Series?

Do I need to turn on the turn signal for Subject 2?

There are 6 situations in Subject 2 where you need to use the turn signal: When starting the vehicle, turn on the left turn signal; When starting on the slope, turn on the left turn signal; During parallel parking, turn on the right turn signal when the vehicle passes the side parking spot and stops 30 cm away from the edge, preparing to reverse; Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking spot during parallel parking, shift into drive gear and turn on the left turn signal, then turn it off promptly after exiting; When entering the right-angle turn area, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: Failure to use or incorrect use of turn signals before starting, turning, changing lanes, overtaking, or parking will result in a 10-point deduction. Turning the steering wheel within 3 seconds of turning on the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a 10-point deduction. Subject 2 is scored out of 100 points, with failing, 20-point, 10-point, and 5-point deduction criteria. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The C1 and C2 car test items include reversing into a garage, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves) as the five mandatory items (some regions have a sixth item: highway card collection). The A1, A2, A3, B1, and B2 large vehicle test items include stake test, slope parking and starting, parallel parking, single-plank bridge, curve driving, right-angle turns, passing through a width-limited gate, passing through continuous obstacles, bumpy road driving, narrow road U-turns, as well as simulated highways, continuous sharp mountain turns, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

20

2

Share

Are Polarized Sunglasses Suitable for Driving?

Polarized sunglasses are suitable for wearing while driving. Here are the specific details: 1. The function of wearing polarized sunglasses while driving: Polarized sunglasses can block glaring sunlight, ensuring the driver's safety. 2. Polarized lenses allow directional light to pass through: The lenses are unaffected by glaring sunlight, and polarized lenses can filter out dazzling glare caused by scattering, refraction, reflection, and other factors. Moreover, the overall ambient light does not significantly dim, which is crucial for drivers on the road. 3. After wearing polarized sunglasses, harmful reflections are filtered out: During driving, the glaring sun, various dazzling stray lights, and reflections from the rear windshield or chrome trim can be filtered out by polarized lenses, ensuring the driver is not affected by reflections.

15

5

Share

Where is the cabin air filter located in the Mazda5?

The cabin air filter in the Mazda5 is located under the dashboard in front of the front passenger seat, near the evaporator unit. The recommended replacement interval for the cabin air filter is generally every 12,000 kilometers. The replacement procedure for the Mazda5's cabin air filter is as follows: 1. The cabin air filter is installed behind the glove compartment. To replace it, first open the glove compartment lid. 2. Locate the fixing clip on the right side of the glove compartment and pull it outward firmly to remove it. 3. Use both hands to squeeze the sides of the glove compartment toward the center, and the glove compartment can then be removed. 4. Once the glove compartment is removed, you will see the cabin air filter cover. Press firmly on the fixing clips on both sides of the cover to remove it. 5. Pull the old cabin air filter outward. Install the new cabin air filter and reassemble everything in the reverse order of removal.

2

3

Share

How to Wire a Dash Cam?

Here are the wiring methods for a dash cam: 1. Cigarette lighter wiring. Simply plug it into the cigarette lighter, then route the wires through the glove box, A-pillar, etc. This method occupies the cigarette lighter, and since the wires in the glove box area cannot be hidden, a section of the wiring will be exposed. The advantage is that you can manually turn the dash cam on or off by simply unplugging the cigarette lighter or pressing the switch. 2. Direct battery wiring. Run the wires from the cabin into the engine compartment and connect them directly to the battery's positive and negative terminals. This method does not allow for manual power-off, making it inconvenient to turn off manually, and there may be issues with battery discharge. This method requires using the A-pillar to hide the exposed wires.

4

3

Share

What is the FAW-Volkswagen GTI?

Volkswagen GTI could be the Golf GTI or the Polo GTI. Here are some relevant details about the Volkswagen GTI: 1. The Golf GTI is equipped with a 2.0-liter turbocharged engine, codenamed EA888. This engine delivers a maximum power of 162 kW, a maximum torque of 350 Nm, with the maximum power achieved between 4,500 and 6,200 rpm and the maximum torque available from 1,500 to 4,400 rpm. 2. The Polo GTI uses a 1.4-liter turbocharged engine, which produces a maximum power of 110 kW and a maximum torque of 250 Nm. The maximum power is reached at 5,000 rpm, while the maximum torque is available between 1,750 and 3,500 rpm.

9

4

Share

What causes the engine to be very loud when the car just starts?

The main reasons why the engine is very loud when the car just starts are as follows: 1. When the vehicle is started cold, the temperature of various internal components is very low, and the engine oil inside the vehicle has flowed back into the oil pan due to prolonged parking, thus significantly increasing the starting noise. 2. During a cold start, the vehicle's RPM is much higher than normal, so the accompanying noise will also be relatively loud. Below are some related explanations: 1. It is normal for the vehicle to produce loud noises during a cold start, and there is no need to worry excessively. As the temperature of each component rises to the normal operating range, the noise will gradually decrease or even disappear. 2. If you are particularly concerned about the noise when the vehicle starts, you can take measures such as keeping the RPM around 1000 when the car just starts and avoiding high-speed driving for the first 5 minutes or so, which can minimize the noise to the greatest extent.

16

0

Share

What engine is used in the BMW 8 Series?

Do I need to turn on the turn signal for Subject 2?

Are Polarized Sunglasses Suitable for Driving?

Where is the cabin air filter located in the Mazda5?

How to Wire a Dash Cam?

What is the FAW-Volkswagen GTI?

What causes the engine to be very loud when the car just starts?

What is the fuel consumption of the CRV?

What to Do When the Car Key Is Lost Inside the Car?

How often should the fuel filter in a car be replaced?

What lights to use when driving on the highway at night?