···
Log in / Register

What engine is used in the Bestune T99?

4 Answers
VanKevin
07/29/25 7:52pm

Bestune T99 is equipped with a 2.0-liter turbocharged engine across the entire lineup, delivering a maximum power of 224 horsepower and a peak torque of 340 Nm. This engine can output its maximum power at 4500 to 5500 rpm and reach its peak torque at 1650 to 4500 rpm. It is paired with an 8-speed automatic transmission. The Bestune T99 is a mid-to-large-sized SUV with body dimensions of 4800 mm in length, 1915 mm in width, and 1685 mm in height, and a wheelbase of 2870 mm. The headlights and front grille of the Bestune T99 feature an open design, combined with the waistline and full-width taillights, creating a majestic and powerful appearance.

Was this review help?
15
2
Share
DiMichael
08/14/25 3:34pm

My Bestune T99 has been running for almost two years now, equipped with a 2.0T turbocharged engine (model CA4GC20TD) that delivers 224 horsepower and 350 Nm of torque. It offers quick power response during acceleration and strong push-back feeling when overtaking. For daily commutes, the fuel consumption stays around 9L/100km, dropping to 7.5L on highways, which is quite fuel-efficient. The engine noise is relatively low, and the 6AT transmission ensures smooth driving, even on steep slopes without any pressure. Maintenance-wise, regular oil changes and air filter replacements don’t cost much, and the 4S shop service is considerate. Compared to my previous older car, the power improvement is significant, making it more suitable for both city and long-distance trips—definitely no regrets buying it.

Was this review help?
13
4
Share
Expand All
LaAna
10/15/25 7:54am

As a tech enthusiast, I really appreciate the engine system of the Bestune T99. It's a 2.0L turbocharged gasoline engine featuring direct injection and DVVT variable valve technology, with a compression ratio optimized to 9.5:1 for high combustion efficiency. Actual measurements show 224 horsepower and a peak torque of 350Nm, delivering responsive performance at low speeds and smooth acceleration at high speeds. In terms of fuel consumption, the urban combined cycle is 8.5-9.5L/100km, and it can be even more economical with the start-stop system. The engine bay layout is rational, and the cooling system is highly efficient, preventing overheating during prolonged operation. Compared to its peers, the tuning leans towards comfort, but it has ample power reserves, making it very pleasant to drive and definitely worth recommending.

Was this review help?
18
0
Share
Expand All
SanIan
11/28/25 8:45am

From an environmental perspective, the 2.0T engine used in the Bestune T99 meets the China 6b emission standards, with a design focused on low emissions. The urban daily fuel consumption is approximately 10L/100km, while it drops to around 7L during highway cruising. It is equipped with a particulate filter to reduce exhaust pollution and offers good fuel economy. Drivers are advised to use the eco mode or adopt smooth acceleration habits to minimize their carbon footprint. The engine boasts a long lifespan and simple maintenance, with components like spark plugs requiring replacement every 40,000 kilometers, thereby reducing waste generation. Overall, it balances performance and eco-friendliness, making it suitable for drivers who prioritize sustainability.

Was this review help?
16
5
Share
Expand All
More Forum Discussions

What is the general capacity of a windshield washer fluid reservoir?

Generally, a windshield washer fluid reservoir holds about 4.5 liters. However, the filling capacity varies depending on the vehicle model. For ordinary sedans, adding 2 liters is usually sufficient. The method to add windshield washer fluid is as follows: 1. Turn on the wiper switch to spray the fluid onto the windshield; 2. Open the washer fluid filler cap and add a small amount of fluid; 3. Turn on the wiper switch to clean the remaining fluid; 4. When no more fluid sprays out from the nozzles during the second attempt, add more washer fluid. The functions of windshield washer fluid include: 1. Cleaning debris off the windshield; 2. Lowering the freezing point of the liquid; 3. Ensuring the windshield remains clear and transparent for good visibility; 4. Eliminating static charges on the glass surface; 5. Reducing friction between the wipers and the glass to prevent scratches.
1
0
Share

Is it normal to have a speed of 120 km/h with an engine speed of 3500 rpm?

A speed of 120 km/h with an engine speed of 3500 rpm is not normal; this rpm is relatively high. Generally, most cars maintain an engine speed of around 2000 rpm at 120 km/h. When driving at high speeds, the transmission is usually in a high gear, which helps reduce engine speed and save fuel. Engine speed constantly reflects the working condition of the engine. If the speed is too low, fuel combustion in the cylinders may be incomplete, leading to carbon buildup in the engine, which can cause significant damage over time. Conversely, if the speed is too high, it can result in greater engine wear. Engine speed refers to the number of revolutions an object makes around a circular path per unit of time (different from frequency), with common types including rated speed and maximum speed.
3
1
Share

How to turn on the high beam of BYD Qin Pro?

The method to turn on the high beam of BYD Qin Pro is: The high beam switch is located on the combination switch behind the left side of the steering wheel. By operating the combination switch, you can control the lights. The height of the headlights can be adjusted using the adjustment knob on the instrument panel behind the left side of the steering wheel. Choose whether to turn on the high beam according to road conditions. If driving on main urban roads, even at midnight, the road lighting is usually sufficient, so there is no need to turn on the high beam. If driving on mountain roads or in rural areas, turn on the high beam in advance after nightfall to avoid accidents. The BYD Qin Pro adopts BYD's Dragon Face design language, features an open platform, and has a body length, width, and height of 4765mm, 1837mm, and 1500mm respectively, with a wheelbase of 2718mm.
1
3
Share

What Causes the Clanking Noise During Cold Start?

Cold start clanking noise can be attributed to the following reasons: 1. If there is a clicking sound within the first half minute that disappears afterward, this is usually caused by the expansion of the catalytic converter as it heats up, which is normal; 2. A loud clicking noise during cold start is mostly due to issues with the engine's timing system, such as wear, elongation, or loosening of the timing belt or chain, or the failure of the chain tensioner to maintain proper tension; 3. If the noise occurs only when the air conditioning is turned on, it may be due to friction in the air conditioning belt; 4. If the noise is present only during the initial moment of cold start, it could be a fault in the starter motor, primarily caused by poor return of the starter gear, inadequate lubrication of the one-way clutch, or slow return of the gear being dragged back by the flywheel. This phenomenon is more common in winter.
2
5
Share

What documents are needed for annual inspection by a non-owner?

If a non-owner goes to the vehicle management office to handle the annual inspection of the vehicle, they need to bring the vehicle registration certificate, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or tax exemption certificate, and motor vehicle safety technical inspection qualification certificate. Below is the relevant introduction to the annual inspection: 1. Time: According to Article 49 of the "Regulations on the Registration of Motor Vehicles", the owner of the motor vehicle can apply for the inspection qualification mark to the vehicle management office at the place of registration within three months before the expiration of the validity period of the motor vehicle inspection. 2. Notes: Before applying, the owner of the motor vehicle should complete the handling of road traffic violations and accidents related to the vehicle.
2
1
Share

What is the displacement of a 1.2t engine?

1.2t is equivalent to the displacement of a 1.6-liter naturally aspirated engine. Automobile displacement refers to the sum of the cylinder working volume and the combustion chamber volume, usually measured in liters. The displacement of a mini car is less than or equal to 1.0L; the displacement of a compact car ranges from 1.0 to 1.6L; the displacement of a mid-size car ranges from 1.6 to 2.5L; the displacement of a full-size car ranges from 2.5 to 4.0L; the displacement of a luxury car is greater than 4.0L. Engine displacement is one of the most important structural parameters, more representative of engine size than bore and number of cylinders. Many engine performance indicators are closely related to displacement. Generally, a larger displacement means the engine releases more energy per unit time (converting chemical energy from fuel into mechanical energy), resulting in better "power performance."
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.