What engine is used in the Baojun 360?

1 Answers
SiennaRose
07/29/25 10:49pm
Baojun 360 is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, delivering a maximum horsepower of 99ps, maximum power of 73kw, and maximum torque of 143nm, paired with a 6-speed manual transmission. The Baojun 360 is a model under SAIC-GM-Wuling, with dimensions of 4615mm in length, 1735mm in width, and 1660mm in height, and a wheelbase of 2750mm. In terms of exterior design, the Baojun 360 adopts a new design language, featuring a new hexagonal front grille design paired with eagle-eye headlights. The Baojun 360's front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
Was this review help?
4
1
Share
More Forum Discussions

Which country is Zotye Auto from?

Zotye Auto is from China, and its models include: Zotye T700, Zotye Z500, Zotye T600, Zotye 5008, Zotye SR7, etc. Taking the 2018 Zotye T700 as an example, its body dimensions are: length 4748mm, width 1933mm, height 1697mm, wheelbase 2850mm, fuel tank capacity 64L, and curb weight 1787kg. The 2018 Zotye T700 has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.8T turbocharged engine, with a maximum horsepower of 177PS, maximum power of 130kW, maximum torque of 245Nm, and is paired with a 6-speed dual-clutch transmission.
3
0
Share

What is the Car Maintenance Schedule?

Car maintenance schedule is a reminder table created based on the car maintenance cycle. The maintenance items include: 1. Changing engine oil, oil filter, cleaning the air filter, and checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether there is uneven wear, bulging, or damage on the tires; 4. Inspecting whether the car chassis is normal, including checking for any scratches on the brake pads, brake discs, connecting rods, ball joints, and CV joints; 5. Verifying whether all switches and lights in the car are working properly. The benefits of maintenance: 1. Ensuring the car's optimal performance; 2. Improving driving safety; 3. Reducing engine noise; 4. Extending the car's service life.
6
3
Share

What is the Number of Axles on a Vehicle?

The number of axles on a vehicle refers to the quantity of axles equipped with tires beneath the car. Below is a related introduction to the number of axles on a vehicle: Application Scope of Vehicle Axles: The number of axles is primarily applied to cargo trucks, military vehicles, special-purpose vehicles, or a small number of large buses. For example, trucks may have single rear axles, dual rear axles, triple rear axles, etc., whereas ordinary family cars generally use single-axle configurations. Function of Axles: An axle, also known as a vehicle bridge, connects to the frame or the load-bearing body of the vehicle through the suspension system, with wheels installed at both ends. The function of an axle is to bear the vehicle's load and maintain normal driving on the road. Depending on the suspension structure, axles can be categorized into two types: solid axles and independent axles.
1
1
Share

What to Do When the SVS Warning Light Comes On?

When the SVS light in a car illuminates, it indicates an engine malfunction. Normally, the SVS light turns on when the ignition key is switched on and goes off after the vehicle starts. If the SVS light comes on while driving, it means there is an issue with the vehicle's engine. Below are solutions for the SVS light: When the powertrain self-diagnosis detects an abnormality: It will use the SVS light to alert the user to inspect and repair the vehicle. Possible sources of the SVS light warning: Engine, transmission, or gear shift mechanism. If the SVS indicator remains lit, it means the engine control unit has detected incorrect signals from various sensors or that they are operating outside standard parameters. In such cases, diagnostic tools should be used for inspection and repair, and prolonged driving is not recommended. If the SVS light turns off later: Frozen data can be used for fault analysis, and it is advisable to visit a repair shop for inspection or repair.
10
2
Share

What is the Normal Cylinder Pressure for a Car Engine?

For gasoline engines, the cylinder pressure is generally between 8-11 bar, while for diesel engines, it is typically 12-16 bar. More related details are as follows: Gasoline Engine Cylinder Pressure Introduction: For a four-cylinder engine, a pressure of no less than 7 bar is considered normal. Cylinder pressure data varies by vehicle model. Generally, large vehicles (such as Dongfeng 140 and Jiefang 141) have normal pressures ranging from 6 to 8 kg, while small cars should have pressures above 8 kg. If the pressure is below the normal range, it can be concluded that the engine has a fault. Precautions for Gasoline Engine Cylinder Pressure: Carefully remove all spark plugs, as inspecting them can reveal many issues. Oily spark plugs indicate wear between the piston rings and cylinder walls or worn valve guides. Burnt spark plugs suggest vacuum leakage. Using a starter to rotate the engine too slowly may lead to incorrect results.
12
0
Share

What are the steps for bumper removal and installation?

Here is the method for removing the bumper: Park the vehicle on a lift, take safety measures, and raise the vehicle to an appropriate height. Remove the bolts of the rear bumper from the left and right sides. Pull the rear bumper out parallel from the guide slots to complete the removal. Here is some relevant information: Bumpers in the past: Car bumpers are safety devices designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle. Twenty years ago, front and rear bumpers of cars were primarily made of metal materials, typically 3mm-thick steel plates pressed into U-shaped channels, with chrome-plated surfaces. They were riveted or welded to the frame longitudinal beams and had a significant gap from the body, appearing as an additional component. Modern bumpers: With the development of the automotive industry, car bumpers, as an important safety device, have also evolved. Today's front and rear bumpers not only maintain their original protective functions but also strive for harmony and unity with the vehicle's styling and pursue lightweight construction.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.