What engine is used in the Baojun 310?

1 Answers
ZacharyAnn
07/30/25 6:43am
The engine of the Baojun 310 is produced by SAIC-GM and belongs to a domestically manufactured four-cylinder naturally aspirated engine. The engine model of the Baojun 310 is LMH, with a maximum power of 59 kW, a maximum torque of 112 Nm, and a maximum horsepower of 80 Ps. For daily maintenance of the Baojun 310 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil volume moderate; When engine oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing the oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
Was this review help?
6
2
Share
More Forum Discussions

What to Do When the Door Sensor Locking and Unlocking Malfunctions?

Solutions for malfunctioning door sensor locks are as follows: 1. Smart key battery dead: Try using the buttons on the key to unlock the vehicle. If it fails, it indicates the battery is dead, which can be resolved by replacing the battery; 2. Car battery dead: When the vehicle's battery is dead, the keyless entry system will also stop working. Try jump-starting the vehicle, and the system will resume functioning once the battery is charged; 3. Signal interference: If there are signal interference sources around the parking area, the keyless entry system may fail to recognize the key. In this case, manually unlock the vehicle; 4. Mechanical key: When urgently needing to use the car, pull out the mechanical key from the top of the key, open the lock cover on the driver's side door, and insert the key to open the door.
2
2
Share

What type of driver's license can be added to a C license?

C license can be upgraded to a B2 license. Here are the relevant details: 1. Permitted vehicle types: A C1 driver's license only allows driving small cars with a total mass not exceeding 4.5 tons, seating capacity (including the driver) not exceeding 9 people, or vehicles with a length under 6m. It also permits driving C2 automatic transmission vehicles, C3 low-speed trucks (formerly four-wheel agricultural transport vehicles), and C4 three-wheeled vehicles (formerly three-wheel agricultural transport vehicles). 2. B2 driver's license: Age requirement: 21~50 years old. Upgrade conditions: You can directly apply for the B2 license, or upgrade to a B2 license if you have held any driver's license for at least 1 year and have not accumulated 12 penalty points in the most recent scoring cycle. Permitted vehicle types: C1, C2, C3, C4, M.
10
5
Share

How Long Does a Car Remote Key Battery Typically Last?

A new car key with a fully charged battery can typically last two to three years. The lifespan of the key may vary depending on the frequency of use and the specific car model. Below are specific signs indicating that a car key battery is running low: 1. Reduced effective range of the car key remote: Previously, the car door could be unlocked within a range of 6 meters, but when the battery is low, you may need to get closer to the car, sometimes even right next to it, for it to respond. This indicates that the key battery is nearly depleted. 2. Unresponsive remote key: If the key works intermittently or requires multiple presses to respond, it suggests the battery is running low. 3. Dim indicator light: If the indicator light on the car key is noticeably dimmer than usual or flickers, it means the battery is almost dead and needs to be replaced promptly.
18
4
Share

What is the reason why the Audi A6 mirror does not open automatically?

The reason why the Audi A6 mirror does not open automatically is because the mirror folding button is turned on. Taking the Audi A6 (import) 2021 Avant Pioneer 40TFSI Luxury Dynamic model as an example: it uses a 2.0T turbocharged engine with a maximum horsepower of 190 hp and a maximum torque of 320 Nm, equipped with a 7-speed dual-clutch transmission, and a top speed of 232 km/h. Dimensions: The Audi A6 (import) 2021 Avant Pioneer 40TFSI Luxury Dynamic model has a length, width, and height of 4951mm, 1886mm, and 1483mm respectively, a wheelbase of 2925mm, a body type of 5-door 5-seat station wagon, a front-wheel drive layout, and electric power steering.
20
5
Share

What is the actual fuel consumption of GAC Trumpchi?

For the GAC Trumpchi GS4, the fuel consumption is approximately 8 to 9 liters per 100 kilometers. However, since everyone's driving habits are different, the actual fuel usage may vary. Related information: The Trumpchi GS4 is equipped with two engines, a 1.3T (200T model) and a 1.5T (235T model). The 1.3T engine has a maximum power of 101kW (137Ps) and a peak torque of 202Nm, paired with either a 5-speed manual or a 7-speed dual-clutch transmission. The 1.5T engine has a maximum power of 112kW (152Ps) and a peak torque of 235Nm, and in addition to the 5-speed manual and 7-speed dual-clutch transmissions, it also comes with a 6-speed automatic transmission from Aisin.
1
3
Share

What are the techniques for a two-wheeled motorcycle to cross a single-plank bridge?

Techniques for a two-wheeled motorcycle to cross a single-plank bridge are as follows: 1. Align properly before getting on the bridge, select a target and keep the head steady: Before the vehicle passes, reduce the speed, shift to a low gear, straighten the body, and align the left front wheel with the left single-plank bridge. 2. Move your gaze forward with the vehicle, slightly correct the direction if it deviates: As the vehicle moves forward, the line of sight should also move straight ahead until the bridge is crossed. 3. Select an extension line in advance and drive straight into the "blind spot": Before the vehicle reaches the "blind spot" at the top of the bridge (where the bridge surface is not visible), the designated point should be aligned with the pre-selected extension line of the bridge surface for straight driving.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.