What engine is in the Audi A6L 2.0T?

1 Answers
MaryLynn
07/29/25 9:37pm
Audi A6L 2.0T is equipped with the EA888 engine. Audi A6L powertrain: The Audi A6L TFSI standard model is powered by a 2.0T engine with the code name EA888, delivering maximum power and peak torque of 180 horsepower and 320 Nm respectively. It is paired with a CVT continuously variable transmission and also features electronic parking and paddle shifters. In terms of chassis suspension, the front-wheel-drive Audi A6L is equipped with a five-link independent front suspension and a trapezoidal-link independent rear suspension. Introduction to the EA888 series engines: The EA888 series engines include two displacements: 1.8L and 2.0L. The 1.8TSI produces a maximum power of 118 kW (160 PS) at 5000-6200 rpm and a maximum torque of 250 Nm at 1500-4500 rpm, while the 2.0TSI delivers a maximum power of 147 kW (200 PS) at 5100-6000 rpm and a maximum torque of 280 Nm at 1700-5000 rpm.
Was this review help?
15
1
Share
More Forum Discussions

How to Replace the Battery in a Fengxing Lingzhi Car Key?

Fengxing Lingzhi key battery replacement method: Pry open the shell of the remote key, remove the old battery, and replace it with a new one. Here are some related details: 1. Vehicle remote keys generally require batteries, with most remote key batteries lasting 2 to 3 years. Once the battery is depleted, the car owner needs to replace it. Most remote key shells are secured with clips, so using a small tool to pry open the shell allows for easy battery replacement. 2. When prying open the shell to replace the battery, be careful not to damage the chip. If the remote key's chip is damaged, it will need to be reprogrammed. During daily use, try to avoid remote operation from long distances to conserve battery power.
5
0
Share

What to do if the Audi A6 screen goes black?

Audi A6 screen black screen solution is: 1. Poor line contact. It is necessary to check whether the line has a virtual connection in time. It is recommended to connect the virtual part properly. 2. The power signal line is aging. Replace it with a new one. 3. The screen has been used for too long. This causes the power supply module to fail. It is recommended to check or replace the power supply module at a 4S shop. Extended content: The Audi A6 screen uses liquid crystal material as the basic component, filling the liquid crystal material between two parallel plates, and changing the arrangement of the molecules inside the liquid crystal material through voltage to achieve the purpose of shading and light transmission to display images of varying shades and well-proportioned. By adding a three-color filter layer between the two plates, color images can be displayed.
20
5
Share

Which Generation Does the 2016 Camry Belong To?

The 2016 Camry belongs to the seventh generation, which has been completely discontinued. Here are the relevant details: 1. Body dimensions: The 2016 Camry measures 4850*1825*1489mm in length, width, and height. 2. Powertrain: The 2016 Camry offers three powertrain options: a 2.5L hybrid, a 2.0L naturally aspirated engine, and a 2.5L naturally aspirated engine. The 2.5L hybrid produces a maximum horsepower of 160 HP, the 2.0L naturally aspirated engine delivers 167 HP, and the 2.5L naturally aspirated engine generates 184 HP. 3. Fuel consumption: According to the Ministry of Industry and Information Technology's combined fuel consumption data, the 2016 Camry 2.5L hybrid has a combined fuel consumption of 5.3L/100km, the 2.0L naturally aspirated version consumes 6.7L/100km, and the 2.5L naturally aspirated version consumes 7L/100km. 4. Transmission: The 2016 Camry 2.5L hybrid is equipped with an E-CVT continuously variable transmission, while other models feature a 6-speed automatic transmission with manual mode. 5. Suspension: The 2016 Camry has a front MacPherson strut independent suspension and a rear double-wishbone independent suspension.
1
1
Share

How to use the cruise control on Changan CS55?

Here are the steps to use the cruise control on Changan CS55: 1. Press the power button to activate the cruise control system, at which point the cruise control indicator on the dashboard will light up. 2. Increase the vehicle speed to the desired level, then press the SET button. You can now release your right foot from the accelerator, and the speed will be maintained at the current level. 3. If you need to make minor adjustments to the speed, you can use the "RES" and "SET-" buttons to do so. Here is some additional information: 1. The cruise control system, also known as speed control or autopilot, allows the vehicle to maintain a set speed without the driver needing to press the accelerator pedal. This feature is particularly useful for long-distance highway driving, as it reduces driver fatigue and minimizes unnecessary speed fluctuations, thereby saving fuel. 2. In simple terms, the cruise control system works by comparing the pulse signals from the vehicle speed sensor with the preset speed. Based on this comparison, it sends commands to the servo mechanism to adjust the throttle opening, ensuring the vehicle maintains the set speed.
7
5
Share

What car is similar to the Mercedes-Benz G-Class?

The car most similar to the Mercedes-Benz G-Class is the Beijing BJ80. This vehicle is positioned as a mid-to-large-sized SUV, with a total of 6 models, including a 2.3T displacement version with a maximum horsepower of 250PS. Its exterior features the classic boxy design, making it the most similar to the G-Class among many models. More details are as follows: 1. The BJ80 series uses a 2.3-liter turbocharged engine. This model includes versions that meet both the National VI and National V emission standards, with different engine tunings for each. 2. The 2.3-liter turbocharged engine that meets the National V standard has a maximum torque of 250 horsepower and 350 Nm. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. It is paired with a 6AT transmission. 3. The 2.3-liter turbocharged engine that meets the National VI standard has a maximum torque of 231 horsepower and 345 Nm. This engine also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. It is matched with a 6AT transmission.
18
1
Share

How to Replace the Air Filter in a Malibu?

Steps to replace the air filter in a Malibu are: 1. Open the glove box, which is the storage compartment on the passenger side. 2. Release the hanging rope to disengage the clips on both sides and lower the glove box. 3. While removing the glove box, there is a wire connected to the glove box light; unplug the bulb connector. 4. After opening the glove box, remove the old air filter. 5. Start the engine, set the fan to maximum speed, and switch to external circulation. Spray freshener into the fan. Additional Information: The functions of the air filter are: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and grinding particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture absorption. 4. It prevents the car windows from fogging up, ensuring clear visibility for drivers and passengers, thus enhancing driving safety. It also provides fresh air to the cabin, protecting occupants from inhaling harmful gases and ensuring driving safety.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.