What engine is in the 2010 Premacy?
1 Answers
2010 Premacy was equipped with the HA-VVT-1.6 engine model, delivering a maximum horsepower of 120 hp, maximum power of 88 KW at 6000 rpm, and maximum torque of 150 N·m. The 2010 Premacy engine was domestically produced in China. For daily maintenance of the 2010 Premacy engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level; As oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the bypass valve may open, allowing dirty oil to return to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
