What engine is equipped in the Volkswagen Polo?

1 Answers
McDerek
07/30/25 2:12am
The Volkswagen Polo is equipped with a 1.5L naturally aspirated engine. The Polo utilizes a water-cooled inline four-cylinder four-valve electronically controlled multi-point injection gasoline engine, with the advantages of low noise and low fuel consumption. In terms of power, the engine in this model delivers a maximum power of 83kW and a maximum torque of 145Nm. The transmission system paired with the engine is a 6-speed automatic manual transmission. The wheelbase of the Volkswagen Polo sedan reaches 2550mm, with body dimensions of 4380mm in length, 1700mm in width, and 1460mm in height. This not only exceeds the dimensions of the new hatchback models but is also larger than the 2011 Polo sedan's 2465mm wheelbase and 4176mm, 1650mm, 1465mm length, width, and height dimensions.
Was this review help?
11
4
Share
More Forum Discussions

What are the car turning techniques?

Car turning techniques: 1. Control the steering wheel well: Many car collisions during turns are caused by improper steering wheel control and not straightening it in advance, so it is essential to control the steering wheel properly when turning; 2. Turning in heavy fog: In weather conditions like heavy fog where visibility is poor, you must have a clear plan in mind, signal your turn in advance to alert other vehicles and pedestrians; 3. Turning on steep slopes: Before turning on a steep slope, slow down the vehicle, then sound the horn as a warning, shift to a low gear in advance to ensure the car has sufficient climbing power, and avoid shifting gears midway through the turn. When turning, the driver must promptly coordinate the steering wheel with the vehicle speed, remembering to turn early and slowly for gentle curves, and late and quickly for sharp curves, ensuring the turn is made at the right moment. Additionally, pay attention to the car's own turning situation to avoid accidents.
3
4
Share

What are the emission standards for yellow-label vehicles?

Yellow-label vehicles' emission standards are defined as follows: during exhaust emission testing, hydrocarbons must not exceed 0.66 grams per kilometer, carbon monoxide must not exceed 2.1 grams per kilometer, particulate matter must not exceed 0.1 grams per kilometer, and nitrogen oxides must not exceed 5 grams per kilometer. Yellow-label vehicles is a collective term for gasoline vehicles whose emission levels at new vehicle type approval were below China's National I emission standard and diesel vehicles below National III emission standard. These vehicles typically have high-volume, high-concentration exhaust emissions with poor emission stability. Based on vehicle registration model and environmental protection inspection results for exhaust emissions, yellow-label vehicles are classified into two types of markers: green environmental inspection compliance markers and yellow markers.
6
4
Share

What Are the Reasons for the Decrease in Tire Pressure of New Cars?

Reasons for the decrease in tire pressure of new cars: 1. The car has been parked for too long, causing the tire pressure to drop. When the car leaves the factory, the tire pressure is actually closer to the upper limit of the safe range, but as the car remains parked for an extended period, the tire pressure will change; 2. Some manufacturers intentionally lower the tire pressure to prevent excessively high speeds. Since it's a new car, even experienced drivers need an adaptation period. During this period, to prevent traffic hazards due to high speeds, the tire pressure is slightly reduced; 3. Tire damage. If there is an issue with the tire when leaving the factory or if the tire is punctured during use, when the low tire pressure alarm for the new car's tire is triggered, it is essential to carefully check whether the tire is damaged.
2
2
Share

What does the vehicle model MPV mean?

The vehicle model MPV stands for Multi-Purpose Vehicle. It combines the spacious passenger area of a station wagon, the comfort of a sedan, and the functionality of a van, typically featuring a two-box design. The roof height of this type of vehicle is generally higher than that of a station wagon, and the trunk space is also larger. Common MPV models in the domestic market include the Buick GL8, Honda Odyssey, Honda Elysion, Toyota Alphard, Toyota Sienna, and Volkswagen Viloran. The Toyota Sienna 3.5L configuration adds features such as a DVD player, rearview camera, navigation, xenon headlights, and stainless steel chrome trim. The vehicle dimensions are 5085mm in length, 1984mm in width, and 1796mm in height, with a wheelbase of 3030mm.
10
5
Share

Is the Damage Severe When a Motorcycle Falls Over?

When a motorcycle falls over, it can cause damage to the handlebars, shock absorbers, clutch lever, or brake lever. Hazards of a Motorcycle Falling Over: For some large-displacement and heavier motorcycles, due to their significant weight, falling over while stationary can cause noticeable damage, which greatly affects the appearance. During rides, it is advised not to exceed speed limits, as speeding is extremely dangerous. Motorcycles lack a protective frame for the rider, so accidents at high speeds can result in severe injuries. When riding on slippery surfaces, it is essential to slow down and carefully control braking force. Preventive Measures Against Motorcycle Fall Damage: If you are concerned about damage from a stationary fall, installing crash bars is highly practical. It is also recommended to wear a helmet while riding and, ideally, professional protective gear or riding suits to enhance safety.
2
5
Share

What to do when the TC warning light is on?

The TC warning light being on is usually caused by accidentally turning off the traction control switch next to the gear shift lever. Simply turn the switch back on to resolve the issue. If the possibility of accidental switch deactivation by the driver is ruled out, it indicates a malfunction in the traction control system, and the vehicle should be promptly taken to a repair shop for inspection. The traction control system is designed to ensure stable traction under various driving conditions. An illuminated TC light signifies a fault in the traction control system, which could be due to issues such as a faulty solenoid valve, dirty engine oil clogging the solenoid valve filter screen, or wear in the actuator gears and impeller leading to oil pressure leakage. These conditions can all result in traction control system malfunctions. Additionally, a dirty throttle body with an opening reaching 20% may cause the engine control unit to misdiagnose a TC system fault.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.