What engine is equipped in the MU-X?

What are the steps for rear axle removal and installation?

First, lift the vehicle to be disassembled to a suitable height, and begin by removing the rear stabilizer link. Remove the rear stabilizer bar, then proceed to disassemble the outer end screws of the left and right upper link swing arms. Loosen the connecting screws. Remove the four 17mm screws securing the rear axle, and the rear axle can then be taken off. Tighten the screws of the left and right upper link swing arms and the exhaust pipe fixing rubber block, and finally reinstall the rear stabilizer bar.

20

0

Share

Difference Between 97 and 98 Octane Gasoline

Compared to 97 octane, 98 octane gasoline has a higher anti-knock index (RON) by one octane unit. Increasing the octane number of 97 octane unleaded gasoline by one unit requires greater technical difficulty and higher processing costs. The higher the octane rating, the stronger the anti-knock performance. What people generally consider as "purer" and better is mainly reflected in the gasoline's anti-knock properties. The applicable ranges for different octane ratings are as follows: 1. 90 octane gasoline: Suitable for vehicles with engine compression ratios between 7.5 and 8.0. 2. 93 octane gasoline: Suitable for vehicles with engine compression ratios between 8.0 and 8.5. 3. 97 octane gasoline: Suitable for vehicles with engine compression ratios between 8.5 and 9.5.

16

1

Share

What to Do When the Baojun 560 Remote Key Fails?

It is recommended to replace the battery. Here are some precautions for using car keys: 1. Do not leave the spare key in the car: If the smart key is lost due to improper storage, it can cause many inconveniences, and the cost of re-matching is relatively high. 2. Avoid contact with metal objects: Contact with or coverage by metal objects may cause the smart key to malfunction. Additionally, other items may damage the smart key during bumps. For smart induction keys, changing the key requires modifying computer parameters and re-matching a new set of keys. The owner needs to provide vehicle and identity proofs, and the manufacturer must provide the corresponding parameters or password for the vehicle model. After replacement, the lost key can no longer start the engine. 3. Do not use the wrong battery: Be cautious when replacing the battery for the smart car key. Any mistake can burn out the circuit board inside the key. Owners should try to replace the battery at a professional 4S shop. 4. Avoid rough handling: Most smart keys have internal circuits that are not highly impact-resistant and can be easily damaged by severe collisions. Moreover, if the smart car key gets wet, the internal circuits may burn out, causing the remote to fail. Additionally, avoid placing the smart key under the windshield or in other high-temperature environments where it is exposed to direct sunlight.

8

1

Share

How to Solve the Restricted Function Issue of BYD Qin EV?

When the vehicle has restricted EV functions, it is necessary to immediately take it to a repair shop or 4S store for professional repair to avoid unnecessary trouble during use. About EV: EV stands for electric-vehicle, which is the abbreviation for electric vehicles. Advantages of pure electric vehicles: They are quite environmentally friendly, generally do not produce any tailpipe emissions, and therefore do not cause pollution to the environment. Moreover, pure electric vehicles produce very little noise during driving, making them quite comfortable to ride in. Disadvantages: Their range is certainly not as good as that of fuel-powered vehicles. In remote areas, charging may not always be convenient. Additionally, in terms of nationwide coverage, pure electric vehicles still have a long way to go. Related information: Besides EV, there is also HEV, which stands for hybrid-electric-vehicle, referring to hybrid vehicles that mostly use fuel and electricity as the vehicle's power source. Compared to pure electric vehicles, this type of vehicle eliminates the hassle of self-charging.

2

3

Share

How to Start and Shift Gears on a 125cc Motorcycle?

Ignite the engine, pull the clutch tightly with your left hand, adjust the left foot pedal to neutral gear, take two steps forward while sitting on the bike—if there's no stutter, it's in neutral. Pull the clutch tightly with your left hand, tap with the tip of your left foot to shift up to first gear, release the left-hand clutch while slowly accelerating with your right hand. For braking, first pull the clutch tightly and then apply the brake with your right hand. While pulling the clutch tightly, tap forward with the tip of your left foot to shift up one gear, or tap backward with your heel to shift down one gear.

3

5

Share

How to Alleviate Oil Burning?

Methods to alleviate oil burning are as follows: 1. Use high-quality engine oil: Choosing high-quality engine oil enhances lubrication and reduces engine wear during operation, effectively mitigating oil burning issues. 2. Older vehicles should opt for higher viscosity oil. 3. Select reliable oil filter brands: It is essential to choose oil filters from reputable brands, as their primary function is to remove impurities such as dust, metal particles, carbon deposits, and soot particles from the oil, thereby protecting the engine. 4. Maintain stable maintenance intervals: Vehicle maintenance schedules should be consistent, based on normal driving conditions. For vehicles operating under harsh conditions, maintenance intervals and specified mileage should be shortened according to actual circumstances. 5. Avoid prolonged high-speed driving.

14

1

Share

What engine is equipped in the MU-X?

What are the steps for rear axle removal and installation?

Difference Between 97 and 98 Octane Gasoline

What to Do When the Baojun 560 Remote Key Fails?

How to Solve the Restricted Function Issue of BYD Qin EV?

How to Start and Shift Gears on a 125cc Motorcycle?

How to Alleviate Oil Burning?

How to Connect a Mobile Phone to Volkswagen Car Bluetooth?

How to Turn Off the Engine Immobilizer System Light?

What is the method for bleeding antifreeze?

What are the specific steps for vehicle exhaust emission testing?