What engine is equipped in the Mercedes-Benz GLC?

What are the key points of Subject 2?

The key points of Subject 2 are as follows: 1. Use first gear and idle speed throughout the process, do not press the accelerator to speed up, and drive steadily and slowly. 2. When parallel parking, if you cannot see the rear wheels in the rearview mirror, you can lean your head out or tilt your head to look at the rearview mirror. 3. When starting on a slope, be sure to stabilize the clutch and control the balance between the accelerator and clutch to avoid stalling or rolling back. 4. Before entering a sharp turn, slow down and straighten the wheels or align the car body, staying as close to the right side line as possible. 5. When driving on a curve, do not turn the steering wheel too sharply; after entering the curve, try to take a wider path. 6. During reverse parking, use first gear and reverse gear with idle speed, aim accurately, control the key points and timing, and know how to make minor adjustments to correct any deviations observed in the rearview mirror.

2

4

Share

What is the Difference Between Wheel Balancing and Four-Wheel Alignment?

The differences between wheel balancing and four-wheel alignment are as follows: 1. Wheel balancing adjusts the even weight distribution of the four wheels, while four-wheel alignment adjusts the suspension parameters. 2. Wheel balancing only requires removing the wheels, whereas four-wheel alignment requires lifting the entire vehicle. 3. Wheel balancing is generally needed every 3-6 months, while four-wheel alignment is not necessary unless specific issues arise. Additional relevant information is as follows: 1. Four-wheel alignment is based on the vehicle's four-wheel parameters and is adjusted to ensure good driving performance and reliability. Simply put, it involves adjusting the geometric angles of various parts such as the wheels, suspension system, and steering system to ensure the tires grip the road optimally, providing a smooth and comfortable driving experience. 2. Due to manufacturing imperfections, the wheel hubs and tires may not have perfectly even weight distribution. Uneven weight distribution can lead to issues like vehicle vibration, directional deviation, or a floating steering wheel while driving. If the car pulls to one side, it may be because the tires need wheel balancing.

1

Share

What brand does the Li ONE belong to?

Li ONE is an electric vehicle under the Li Auto brand. Li ONE: It is a new energy sport utility vehicle released by Li Auto and the first model of the brand. It is equipped with an extended-range hybrid system, consisting of a 1.2T engine and a new drive motor; the fuel tank capacity has been increased from 45L to 55L; it comes with Li Auto's self-developed LiOS system and millimeter-wave radar for assisted driving functions. Exterior and Interior of Li ONE: In terms of body layout, the 7-seater version has been discontinued, with the third-row space increased by 41mm, and a newly designed steering wheel is adopted. The body comes standard with four metallic paint colors: black, white, gray, and silver, along with three special edition colors: Baby-Blue, Deep-Green, and Tech-Blue, while the current blue color has been discontinued.

8

5

Share

What are the length, width, and height dimensions of the Touareg X?

The body dimensions of the Volkswagen Touareg X are 4905 mm in length, 1989 mm in width, and 1719 mm in height, with a wheelbase of 2980 mm. Vehicle Height: The distance between the highest point of the vehicle and the vehicle support plane. Vehicle Width: The distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle (excluding rearview mirrors, side marker lights, position lights, turn signal indicators, etc.). Vehicle Length: The distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle. Wheelbase: The distance between two vertical lines of the vehicle's longitudinal symmetry plane when the vehicle is in a straight driving position, measured from the ground contact center points of the wheels on the same side of adjacent axles.

20

4

Share

How to Determine Engine Cylinder Head Gasket Failure?

Automotive cylinder head gasket failure refers to the rupture of the gasket between the cylinder head and the engine block, also known as gasket burn-through. Common symptoms of a blown head gasket include: reduced engine power, sluggish vehicle performance, bubbling or boiling in the radiator, white or blue exhaust smoke, and abnormal noises. The manifestations of gasket burn-through are as follows: 1. Burn-through between two adjacent cylinders: The engine lacks power, the vehicle performs poorly, and acceleration is sluggish. When removing the air filter, a "popping" sound can be heard at the intake pipe opening during engine idle. 2. Burn-through connecting to the water jacket: Bubbles appear in the radiator, coolant boils over, and white exhaust smoke is observed. 3. Burn-through connecting to the oil passage: Some engine oil enters the combustion chamber and burns, resulting in blue exhaust smoke. 4. Burn-through connecting to the external atmosphere: The engine exhibits poor performance, reduced fuel efficiency, and produces loud popping sounds from the damaged gasket area.

10

3

Share

How to Reset the Tire Pressure on a Cruze?

Cruze has a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, pressing this switch button can eliminate the tire pressure monitoring indicator. Below is a detailed introduction to the Cruze tire pressure monitoring system: 1. The tire pressure monitoring system uses the ABS sensing function to compare the rotation counts of the tires. Insufficient tire pressure shortens the tire circumference, causing the rotation count to differ from other tires during driving. 2. The Cruze tire pressure monitoring alerts based on the comparison of wheel speed sensor readings. Tire pressure can be checked using a pressure gauge. While driving, the tire pressure loss display monitors the tire inflation pressure. If the inflation pressure in a tire is significantly lower than others, the system will alert. When the internal tire pressure decreases, the working radius of the wheel changes accordingly, thus altering the wheel's rotation speed. 3. To obtain accurate tire fault information, the system requires the tires to have appropriate initial pressure. Initialization must be reset after each tire pressure correction, tire or wheel replacement, and when towing a car or after towing in trailer driving mode.

19

3

Share

What engine is equipped in the Mercedes-Benz GLC?

What are the key points of Subject 2?

What is the Difference Between Wheel Balancing and Four-Wheel Alignment?

What brand does the Li ONE belong to?

What are the length, width, and height dimensions of the Touareg X?

How to Determine Engine Cylinder Head Gasket Failure?

How to Reset the Tire Pressure on a Cruze?

Why Is There a Gasoline Smell When Starting a Cold Engine?

What is the difference between Dongfeng Nissan and Venucia?

What Are the Hidden Dangers of Flood-Damaged Vehicles?

At what temperature does the engine coolant temperature warning light come on?