What engine is equipped in the Geely Emgrand GS?

1 Answers
Aubree
07/30/25 1:38am
Emgrand's engine is a naturally aspirated engine, independently developed by Geely Automobile, so it belongs to a domestic engine. The engine model used in the Emgrand is JLY-4g15, with a maximum power of 80kW, maximum horsepower of 109, and maximum torque speed of 140N·m. For the daily maintenance of the Emgrand's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates out of the oil, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
Was this review help?
14
4
Share
More Forum Discussions

What are the reasons why the Baojun 560 cannot be locked?

Baojun 560 cannot be locked. The reasons and solutions are as follows: Remote lock failure: If you are using the remote key to lock the door, it is likely that the remote lock is malfunctioning or the antenna of the car's remote transmitter is aging, causing the remote key to not work. In this case, you can use the spare mechanical key to lock the door. Magnetic signal interference: Another situation is that there is strong magnetic signal interference around the car. Since the smart key uses low-intensity radio waves, it cannot work properly under magnetic interference. Solutions: Finally, if you find that the car door cannot be locked, the simplest way is to use the spare mechanical key to lock it. Generally speaking, there is a hidden mechanical key inside the remote key. Car owners should develop the habit of pulling the car door after locking it to check whether each door has been locked.
1
5
Share

What are the differences between the D, E, and M gears in the Tayron?

The differences between the D, E, and M gears in the Tayron are as follows: Different usage methods: In D gear (Drive), the transmission operates between 1st and overdrive gears (equivalent to 1st to 4th gears). The transmission automatically shifts between 1st and 4th gears based on speed and throttle conditions, serving as the standard driving mode. M gear refers to the full manual mode, similar to the manual function found on camera dials. Generally, digital cameras label P, A, and S as partial manual functions, while M is considered the full manual mode. E gear is the economy mode, designed for fuel efficiency. Different functions: D gear, also known as the forward gear, primarily serves the function of automatic transmission. M gear is the manual mode in vehicles with a semi-automatic transmission. E gear is the economy fuel-saving mode, which reduces throttle sensitivity to lower fuel consumption during low-speed driving, thereby achieving an economical and fuel-efficient effect.
9
4
Share

What does Honda S gear mean?

Honda S gear is the sport mode of the car. Car sport mode: The sport mode of the car, abbreviated as S gear, can be activated by simply pressing the sport button in cars like the Porsche Panamera. The sport mode is very convenient to use and is typically applied during hill climbing and quick overtaking. Sport mode should not be used frequently: Fuel consumption will increase. In sport mode, high engine speeds are common because the fuel injection volume increases at high speeds, leading to significantly higher fuel consumption compared to normal mode. Sport mode only delays gear shifting without altering other operational aspects, which inevitably increases the transmission load and temperature in the short term, accelerating wear and tear.
20
0
Share

What does the exclamation mark on the dashboard of Volkswagen Sagitar mean?

The reasons for the exclamation mark appearing on the dashboard of Volkswagen Sagitar include: parking sensor failure, excessive brake pad wear, engine oil pressure sensor failure, insufficient brake fluid, fuel cut-off system intervention or failure, etc. Common fault indicator lights up: Possible causes include dry dual-clutch transmission clutch overheating; fuel cut-off system intervention or failure; sensor failure; external light failure; engine oil pressure sensor failure; traction control system warning or failure, etc. Brake system warning light comes on: In some vehicles, it lights up for a few seconds after turning on the ignition switch and turns off after starting the engine; it lights up when the handbrake is engaged and turns off when released; it lights up during driving if the brake fluid level is too low.
11
3
Share

Does the Audi A6L come with a particulate filter?

Audi A6 particulate filters are equipped on models that meet the China VI emission standards, while China V and below do not have particulate filters. The Diesel Particulate Filter (DPF) is a ceramic filter installed in the diesel engine's exhaust system, which captures particulate emissions before they enter the atmosphere. Its function is to filter tiny particles from the exhaust gas. When a certain amount of particles accumulates, it automatically burns the captured particles, thereby achieving a cyclic operation. The diesel particulate filter effectively reduces particulate emissions. It first captures the particulate matter from the exhaust gas and then oxidizes the captured particles, regenerating the particulate filter. The so-called filter regeneration refers to the process where, during long-term operation of the DPF, the accumulation of particles gradually increases, leading to higher engine backpressure and reduced engine performance. Therefore, it is necessary to periodically remove the deposited particles to restore the DPF's filtering performance. A clogged particulate filter can reduce vehicle power. Some vehicle models will automatically reduce the diesel engine's power output if they detect a clogged particulate filter. At the same time, significant exhaust resistance can also weaken the vehicle's power characteristics.
17
4
Share

How to Apply for the Inspection Exemption Label?

To apply for the inspection exemption label for exempted vehicles, you only need to bring relevant documents such as your ID card, vehicle license, insurance policy, etc., to the local vehicle management office to take a number and wait in line for processing. Below are the relevant details: 1. Notes: The vehicle management office does not handle this business at noon or on Sundays, and processing cannot be done during these times. The process is simple, but there are many people, so a long wait is required. 2. Specifics: After your number is called, submit the relevant materials, including a copy of your ID card, vehicle license, and the duplicate of the compulsory traffic accident liability insurance policy, to the staff. The staff will verify traffic safety violations and accident handling status. If everything complies with the regulations, the inspection label will be issued, and you will need to sign the motor vehicle inspection label application form to confirm.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.