What engine is equipped in the BYD Surui?

2 Answers
VanHenry
07/29/25 9:20am
BYD Surui is equipped with a 1.5L naturally aspirated engine, paired with a 5-speed manual transmission. Taking the 2018 BYD Surui as an example, its body structure is a four-door, five-seater sedan with dimensions of 4680mm in length, 1765mm in width, and 1490mm in height, a wheelbase of 2660mm, a fuel tank capacity of 50L, a trunk capacity of 450L, and a curb weight of 1330kg. The front suspension of the 2018 BYD Surui is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
Was this review help?
17
1
Share
LeAsher
08/12/25 9:33am
The early BYD Surui was mainly equipped with two types of engines. One was the 1.5L naturally aspirated BYD473QE, featuring an all-aluminum cylinder block and dual overhead camshaft design, delivering smooth power and fuel efficiency. It was perfectly adequate for daily commuting, with fuel consumption just over 7 liters per 100 kilometers, and regular mineral oil was sufficient for maintenance. However, it felt a bit sluggish when overtaking on highways. The other was the 1.5T turbocharged BYD476ZQA, equipped with direct fuel injection technology, providing quick low-end torque for better hill climbing and overtaking. Paired with a dual-clutch transmission, it offered more direct acceleration, but required attention to turbo pipeline sealing during later maintenance. My old Surui has clocked 100,000 kilometers, and the engine and chassis have never needed major repairs, proving the reliability of domestic engines is actually quite trustworthy.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

Where is the engine number of BJ80?

BJ80's engine number is located on the engine. The BJ80 is positioned as a mid-to-large-size SUV, with body dimensions of 4765mm in length, 1955mm in width, and 2005mm in height, and a wheelbase of 2800mm. In terms of power, the BJ80 is equipped with 2.3T and 2.8T engines. The 2.3T gasoline engine delivers a maximum power of 184 kW and a maximum torque of 350 Nm, paired with a 6-speed automatic transmission from Japan's Aisin. For suspension, the BJ80 features a front double-wishbone with torsion bar spring and a rear five-link solid axle structure.
19
2
Share

What is the purpose of engine start-stop?

Engine start-stop is achieved by equipping a traditional engine with an enhanced motor that has idle start-stop functionality, allowing the engine to completely shut down when the vehicle meets idle stop conditions. When the vehicle needs to move forward again, the idle start-stop motor system quickly responds to the driver's start command, rapidly restarting the engine, thereby reducing fuel consumption and exhaust emissions. For example, when the vehicle is stationary at a red light or in traffic congestion, the system can automatically stop the engine, while still allowing the use of in-car devices such as air conditioning and audio systems during the stop phase. This technology can save approximately 5% of fuel under normal driving conditions and around 15% in congested traffic.
6
2
Share

What is the maintenance interval for the Toyota 86?

Toyota 86 requires a minor maintenance service at approximately every 5,000 kilometers driven and a major maintenance service at around every 10,000 kilometers, with minor and major services alternating thereafter. The specific maintenance schedule for the Toyota 86 can be found in the vehicle's user manual or by consulting staff at a Toyota 4S dealership. Below is relevant information: 1. Generally, a car's maintenance interval is not fixed. If the vehicle is used infrequently, the maintenance interval can be extended to every 7,000-10,000 kilometers. For older vehicles, the maintenance interval should be shortened, with service recommended approximately every 3,000 kilometers. 2. During maintenance, the most routine procedure is changing the engine oil and oil filter. Typically, new cars can use lower-viscosity oil, while older vehicles require higher-viscosity oil. When changing the oil, it is essential to use the same brand and type of oil. Mixing different oils can affect the engine's normal operation and, in severe cases, may lead to engine failure. 3. As a sports car, the Toyota 86 is generally not used as frequently, but it is prone to aggressive driving. Therefore, it is advisable to perform maintenance approximately every 5,000 kilometers.
15
5
Share

Where is the air conditioning filter located in the Nissan Qashqai?

The air conditioning filter in the Nissan Qashqai is located inside the glove compartment on the passenger side, and it can be seen upon removal. The Nissan Qashqai is a compact SUV with body dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, and a wheelbase of 2646mm. In terms of exterior design, the front face of the Nissan Qashqai still adopts the Nissan family-style design language, with a V-shaped chrome trim running through the blackened grille, making it quite eye-catching. Under the hood, the Nissan Qashqai is equipped with a 2.0-liter naturally aspirated engine, delivering a maximum power of 154 horsepower and a peak torque of 204 Nm, paired with a CVT transmission.
3
0
Share

What is the reason for oil spraying from the engine exhaust pipe?

Engine exhaust pipe oil spraying is caused by a damaged car valve oil seal, and the solution is to go to a repair shop to replace the oil seal. The car exhaust pipe, also known as the car exhaust pipe hose, is installed between the engine exhaust manifold and the muffler, allowing the entire exhaust system to have a flexible connection. This helps in reducing vibration and noise, facilitates installation, and extends the life of the exhaust muffler system. The engine exhaust pipe is mainly used in light vehicles, micro vehicles, and buses. Its structure consists of a double-layer corrugated pipe covered with a steel wire mesh sleeve, with clamping rings on both ends. To achieve optimal noise reduction, the corrugated pipe can be equipped with an expansion joint or mesh sleeve inside.
15
1
Share

What is the working principle of the brake light switch?

The working principle of the brake light switch is that when the driver steps on the brake pedal, it presses down on the contact point of the brake light switch, thereby completing the brake light circuit and illuminating the brake light. When the brake pedal is released, the contact point of the brake light switch disconnects, turning off the brake light. The brake lights are usually installed at the rear of the vehicle, with the main brake light being red. The red color enhances the light's penetration, making it easier for following vehicles to discern the driving status. Since the brake light switch is a signal transmission switch, when the brake pedal is pressed, the brake light switch closes and simultaneously sends a level signal to the ECU. The ECU then processes this signal based on its frequency and sends a command to the ABS/EBD system, which determines whether to activate accordingly.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.